Pressure Transducers Dealers

• Material: Mild Steel
• Condition: New
• Power: Electric
• Application: Static Application Use
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Type: Differential Pressure Transducers
• Country of Origin: India

  Differential pressure transducers, while similar to standard pressure transmitters, focus on measuring the difference in pressure between two points in a fluid or gas system. They don't provide absolute pressure readings but rather the variation between two pressures. Here's a breakdown of their typical specifications:   General Specifications · Differential Pressure Range: This specifies the range of pressure difference the transducer can measure (e.g., ±100 Pa, -10 to +10 bar). · Accuracy: Expressed as a percentage of full scale (%FS) similar to standard transmitters. Typical accuracy for good quality models is ±0.5%FS to ±2%FS. · Output Signal: The most common output signal is a 4-20mA current loop, but 0-5V or 0-10V voltage outputs can also be found. · Supply Voltage: The voltage required to power the transducer (typically 24VDC). ·  Performance Specifications · Temperature Limits: The operating temperature range the transducer can withstand. · Static Pressure Rating: The maximum pressure each individual input port can handle without damage (important because differential transducers have two pressure inputs). This can be higher than the differential pressure range. · Proof Pressure: The maximum overall pressure the transducer can withstand without permanent damage (typically 1.5 to 2 times the upper limit of the differential pressure range). · Burst Pressure: The pressure that will cause catastrophic failure (typically 4 times the upper limit of the differential pressure range). · Response Time: The time it takes for the output to respond to a change in pressure difference (usually in milliseconds). Environmental Specifications · Ingress Protection (IP rating): Similar to other transmitters, this rating indicates the level of protection against dust and water ingress (e.g., IP65 for dust tight and water jets). · Material of Construction: The materials used in wetted parts (those coming into contact with the process fluid) are crucial. Common materials include stainless steel, Hastelloy C, and Monel.  Additional Features · Media Compatibility: The type of fluids or gases the transducer is compatible with, considering factors like corrosiveness. · Communication Protocol (Optional): Some advanced models offer communication protocols like HART for remote configuration and diagnostics. · Display (Optional): Some transducers may have a built-in display for local pressure difference reading. · Calibration: Calibration is necessary to ensure accuracy. Some models offer features like zero and span adjustments for easier calibration. Factors to Consider When Selecting a Differential Pressure Transducer · Process Connections: The type of fitting used for connecting the transducer to the two pressure points (e.g., NPT, flange). · Electrical Connections: The type of electrical connector for power and output signal. · Fluid Compatibility: Ensure the materials and media compatibility specifications match the fluids in your application. By understanding these differential pressure transducer specifications and additional factors, you can select a suitable model for your specific application that requires measuring pressure differences in liquids or gases.

• Material: Steele
• Condition: New
• Type: PRESSURE TRANSDUCER
• Color: gold
• Pressure Range: New
• Pressure:: 40 bar
• Type:: Pressure Transmitter
• Condition:: New without box
• Make:: Autronica

AUTRONICA GT-7/40A BAR PRESSURE TRANSDUCER Technical Specifications Make: Autronica  Part no: GT-7/40A Pressure: 40 bar Type: Pressure Transmitter   Condition: New without box

• Type: Current To Pressure Transducer
• Weight: 2.1 Lb (0.94 Kg).
• Feature: Excellent Performance, High Quality
• Condition: New
• Application: Clean Dry Air Filtered To 40 Microns.
• Power: Loop Powered.
• Warranty: 1yrs
• Brand Name: DWYER USA

Current to Pressure Transducer Series IP Current to Pressure Transducers Intrinsically Safe, NEMA 4X Enclosure, Field Reversible, Low Cost The Series IP Current to Pressure Transducers converts a current input signal to a linearly proportional pneumatic output pressure. The features include built-in volume booster, low air consumption, field reversible (provides output which is inversely proportional to the input signal) and flexible zero and span adjustments. The rugged NEMA 4X enclosure allows splashdown and outdoor installation. The IP can be used for applications that require operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air cylinders, web tensioners, clutches and brakes. Product Applications Applications that require the operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air cylinders, web tensioners, clutches and brakes ModelDescription IP-42Current to pressure transducer, 4-20 mA input, 3-15 psi (20-100 kPa) output. IP-43Current to pressure transducer, 4-20 mA input, 3-27 psi (20-185 kPa) output. IP-44Current to pressure transducer, 4-20 mA input, 6-30 psi (40-200 kPa) outp Specifications Service:Oil free, clean dry air filtered to 40 microns. Input Signal:4-20 mA. Input Impedance:IP-42: 180 ohms; IP-43 and IP-44: 220 ohms. Air Pressure:Minimum: 3 psig (21 kPa) above maximum output; Maximum: 100 psig (700 kPa). Linearity:

• Material: Plastic
• Application: Clinic
• Feature: Durable, Fine Finished
• Shape: Any
• Size: All Size
• Polishing: Yes

• Country of Origin: India
• Type: Pressure Transducers
• Application: Static Application Use
• Feature: Accurate Results
• Brand Name: Keller
• Shape: Round

• Brand Name: Prignitz
• Country of Origin: India
• Accuracy: +/-0.5% FS
• Output: 4-20 mA/0-10 VDC/0-5VDC/0.5 to 4.5 VDC
• Suitable Media: Gas
• Pressure Range: -1 Bar onwards upto 1000 Bar
• Response Time: 1 ms
• Supply Voltage: 10-28VDC/5VDC
• Housing Material: Stainless Steel

Pressure Transmitters for Hydrogen Compatible ApplicationsThe piezoresistive stainless-steel measuring cell has expecially been adapted to the chemical and physcial properties of hydrogen. The entire sensor consists for a single piece, which is designed to prevent embrittlement of the metal surface by ionized hydrogen. It is also absolutely vacuum-tight and elastomer-free Leaks caused by material fatigue on internal seals are thus eliminated from the outset. It has no disturbing pressure transfer fluid and no large pressurized surfaces. The membrane is of a very robust design. The link-in to the connection pins is made by wedge-wedge bonding and is therefore absolutely stable even at low temperatures, or for shocks or vibrations. The measruing bridge evaluates via a mixed singal ASIC. The SPT-H2 can also be used for application where EC79 certification are important

• Application: Static Application Use
• Weight: 0-2kg, 2-4kg, 4-6kg, 6-8kg
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Voltage: 12VDC, 24VDC
• Condition: New
• Frequency: 50hz, 60hz
• Power: Electric
• Warranty: 5yrs

The DTAIL defines the industry standard in combination with temperature measurement. One process connection suffices to measure both values. The unit excels in its high quality workmanship and cost efficiency. Its absolute reproducibility and stable measuring values contribute to our measurement accuracies. Liquid filled measuring system Maximum reliability through new membrane technology Standard G-coating to counteract adhesive materials Combined pressure and temperature measurement Robust design with G-Armor flexible components Applications with process medias of up to 400°C (750°F) possible Pressure ranges from 0-50 and 0-2.000 bar (0-725 to 29,000 psi) available Stable output signals Longlife Design Integrated temperature measurement

• Condition: New
• Application: Automotive Industries
• Feature: Accurate Results, Durable
• Type: Pressure Transducers
• Frequency: 50hz
• Country of Origin: India

We are offering melt pressure transducer. Rt6s melt pressure transducer is ideal for general purpose melt pressure applications. The rt6s melt pressure transducer features the industry standard 3.33 mv/volt output and offers pin-to-pin compatibility with all competitors’ models utilizing the bendix style 6 pin bayonet connector. Rt6s melt pressure transducer is provided by us with a 6" rigid stem, and 1/2-20 unf thread for mounting in standard transducer mounting holes. features of our rt6s melt pressure transducer 3.33 mv/volt full scale outputaccuracy +/- 0.5%internal 80% shunt calibrationall welded all stainless steel construction

• Condition: New
• Feature: Easy To Operate, High Strength, Highly Durable
• Country of Origin: India
• Material: Bronze
• Color: Golden
• Packaging: Box
• Finishing: Polished
• Packaging Type: Box

• Type: Pressure Transducers
• Material: Metal
• Weight: 0-2kg
• Feature: Accurate Results, Durable
• Frequency: 50hz
• Brand Name: Honeywell

• Material: Aluminum, Plastic
• Weight: 0-2kg
• Feature: Sturdy construction, Optimum quality, Indian and imported make
• Voltage: 12VDC
• Warranty: 1yrs
• Output: 10ma

We are engaged in providing well designed Pressure Transducers for our valuable clients. The Pressure Transducers are highly appreciated for their superior performance. We procure these Pressure Transducers from the trusted manufacturers who make use of high grade technology for the production of these Pressure Transducers.