Vacuum Wax Injector Dealers

• Voltage: 220 V
• Power Source: Electric
• Phase: Single Phase
•  Frequency: 50 Hz, 60 Hz
• Net Weight: 20Kg
• Overall Dimension: 17x14x14 Inch
• Wax Capacity: 2.5 K.G

This is an excellent quality wax injector with solid state digital temperature controller which allows setting of precise wax melting temperature. It has leak resistant nozzle and drip guard. It features fully insulated aluminium pot. It has overshoot temperature control and dual nozzle provision.

• Temperature Accuracy: ± 0.2 ℃

High Filling Ability Filling ability is very high since wax is injected after the inside of a rubber mold is vacuumized. A wax pattern with high filling ability is provided for both thin and small materials.Setting of small time unit is possible. The vacuum time can be set down to 1100 second and the injection time can be set down to 110 second.

We offer Wax Injector. Specifications:- Double Operator Double Nozzle. For storage of wax, a Solid Aluminum tank used. The outer body of the injector is made from M.S and powder coated. The transparent Acrylic top fitted with safety valve pressure gauge input valve. The thermostat utilized is of high accuracy range from 80C-100C0 and is made in Germany. FHB KB-30 Imported heater 500 watt is used for heating purpose. The entire tank is covered by 120 density ceramic - wool. Operating temp-720C. Operating voltage 230VAC Single phase. Machine is offered warranty for one year - no warranty for heater. Aluminum tank is provided for quick heating of wax. Wax Capacity: 2.5kg 3.5kg. Available with without manual pump. Pressure regulator provided with safety valve.

• Brand Name: IMI
• 8 Mode: Lumber cum Cervical
• 30 Pre feeded Program: Continuous & Intermittent Program

Akay hi-trac, a micro-computer controlled unit with eight traction modes for lumber-cum-cervical traction is based on solid-state circuitry. the three section fixed height painted bed with storage cabin underneath is an integral part of the unit. Techanical specification: * therapy modes: eight traction modes for either lumber or cervical traction, in progressive, regressive, intermittent & static modes etc. * memoryprogramme: "30" treatment patterns can be programmed & stored in non-volatile memory. (24 programmes are feeded and six programs are free). * traction force: adjustable from 05 kg to 60 kg. * base force: adjustable from 00 kg to 54 kg. * traction hold time: adjustable from 00 to 99 sec * base trac hold time: adjustable from 00 to 99 sec * treatment time: continuously adjustable from 00 to 99 minutes, with acoustic signal & automatic reduction of traction force. * displays: digital display of traction force, base force, tf hold time, bf hold time, treatment time & graphical display of trac. Mode. * auto-tension-adjustment: the set traction force is automatically maintained throughout the operation. Traction patient safety : 1, automatic system check in soft-ware on start of traction. 2, program error: error in programming is displayed signalled on the panel. 3, high force: high-force signal is activated if traction force is set for more than 18kg. 4, high-force acceptance: acceptance of high force is required before start of treatment. 5, automatic tension release when emergencies occur. Patient can stop with hand held switch. * couchbed: fixed height-70mm, foam padded top is divided in three sections. Head section has an adjustable incline * accessories: adjustable flexion stool, head-halter, pelvic & thoracic belts. * power supply: 220-240 v ac. (use stabilizer).

• Country of Origin: India
• Type: Vacuum Wax Injector
• Material: Mild Steel
• Color: Blue
• Voltage: 220 V
• Condition: New
• Automatic Grade: Semi Automatic
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1 Yr
•  Frequency: 50 Hz

• Voltage: 230 V AC
• Power Supplier: Single Phase
• Absorbed Power: 500 W
• Wax Capacity: 1 kg
• Temperature: 100° C
• Weight: 18.5 kg

• Features: Tough design, Resistivity against abrasion, Easy to operate
• Power supply: 220 volts, Single phase
• Power consumption: 3 to 4 Amp
• Wax Capacity: 5 kg
• Dimension: 12 x 10 x 24
• Net weight: 20 kg

WAX INJECTORThis is an excellent wax injector with solid state digital temperature controller, which allows setting of precise wax melting temperature. It is equipped with double nozzle with airtight partition tank for each individual nozzle. This allows both the nozzles to work independently at different air pressure. So it makes this one injector as good as two different injectors working with common heater to save power. This wax injector is supplied with two separate air pressure meters with safety valve.

We are one of the leading importers and suppliers of a superior range of Wax Injector. These wax injectors include industrial regulators, and pressure gauges and temperature controller. Our range is a sturdy brass pressure release value and drain value that can be calibrated. Furthermore, we are committed to meet the bulk demand of our clients within a given timeline.

• Electrical :.: 230V 50Hz
• Temp.: 30 -110°C
• Power consumption :: 1 Kw.

  Features Heavy Duty Aluminum Wax pot. Calibrated Temp Controller to keep wax at a consisting Injection temperature. Emergency Release Valve Pressure Gauge Digital Temperature Controller. Double Nozzle Foot Pump

*  Maintains uniform liquidity of wax and can handle wax capacity of 1.5 kg.  *  Aluminum wax pot (Pot Size: 130 MM ID & 160 MM Depth) to ensure uniform heating. *  Digital temperature control. *  High quality heating wire to determine universal temp and longer service life. *  Air pressure wax injector ideal for heavy production wax injection. *  Leak proof nozzle keeps work area clean.  

• Material: Mild Steel
• Phase: Single Phase
• Power Source: Electric
• Country of Origin: Made in India
• Frequency: 50 Hz
• Input Voltage: 230 V
• Max Bending Radius: 100 mm
• Pressure: 0.25 MPa

Wax Injector is second important unit in complete Jewellery casting Equipment. And as other gold making machinery it also require high precision for making wax and later wax tree.  In jewellery casting process wax pattern affects gold, silver ornaments directly. And the result of gold tree, silver tree or platinum tree is mirror image of wax tree. So as in Jewellery Casting Machine unit wax injector requires high precise control. Jewellery Casting Process depends highly on wax tree result and so wax pattern must be clear & fine. Jewellery making machinery (wax Injector) reflects result of wax patterns.    Our ample assortment of wax injector is in high demand due to its high efficiency and excellent performance. We are leading automatic wax injector manufacturers in India & supplying worldwide. We manufacture our vacuum wax injector from the high quality precise raw material & using advance technology machines. It has a solid and Special Metal tank which can store a large amount of wax at a time. It provides a constant and uniform pressure on the wax while injecting it. Our vacuum wax injector needs no maintenance due to its rugged construction and robust structure.

• Brand Name: Rajdeep
• Phase: Single Phase
• Voltage: 220-240 V
• Country of Origin: Made in India
• Power Consumption: 500 W