Welding Generator Dealers in Hathras Road, Agra

We offer Welding Generator in power range from 1000w to 4200w. We can also customize the Welding Generator in specific power range to meet varied power requirements in industries. The Welding Generator incurs low cost of maintenance. Besides, as all the components of the Welding Generator are welded and soldered, they don’t require replacement in the long run.

• Certification: CE Certified
• Frequency: 50 Hz
• Warranty: 1year
• Cooling System: Air Cooling, Water Cooling
• Automation Grade: Automatic

We are offering welding generator. our welding generator is the apt for the critical power failure times in hospitals and military stations, which has proved its efficiency to give 100% results in tough industrial applications without any hindrance. specifications : typedirect online weldingfuelh.s. Dieselrev. Speed1500 rpmstartinghandle start (optional-electrical)frequency50 hzfuel tank10 litersinsulationf class technical specifications : modelapgww - 8apgww - 6welding rod size ( swg.)12 to 8.012 to 6.0welding rod size ( mm )2.5 to 4.02.5 to 5.0welding current (amps)max. 220max. 400current controlling8 step8 stepsingle phase load at 230 v2.0 kw(8.7 amp)3.0 kw( 13 amp)prime moverdiesel engine rating12.0 h.p.20.0 h.p.no. Of cylinderonetwocoolingwaterwaternet weight of unit343.0 kg425.0 kggross weight of unit520.0 kg585.0 kgpacking size (lxwxh) cm.135 x 56 x 119159 x 66 x 123user sectorsdomestic, commercial and industrialapplicationdirect online welding

• Frequency: 50Hz
• Cooling System: Air Cooling, Water Cooling
• Power: 10
• Power: 9 Kw
• Condition: New
• Rated Voltage: 220V
• Number of Cylinder: Single
• Rated Speed: 1500 rpm
• Power Source: Electric
• Fuel Tank Capacity: 15 Liter
• Fuel Type: Diesel
• Material: Metal

Welding set that can be used on sites where there is no electricity… Alternating Current (AC) Welding Rate: Normal :200 Amp., 250 Amp. & 400 Amp. . Vidhata Diesel engine 10, 12 & 22 H.P Engine cooling water or air cooled Starting – Electric start / Manual hand cranking. Battery charging – 12 Volt dynamo Engine safety high engine temp or LOP uto shut off Amp. meter Max ø rod: 6 mm Auxillary Output: 4kw – 230v (with Circuit Breaker). Alternator Semi Brushless. With current controller remote. AVAILABLE IN A.C. OR D.C Current Open Type Frame & Canopy / Trailer type availabl. Heavy-duty, field-provide design for long life. Four way welding voltage regulator. Low or high current usage switch. Environmental protection for adverse conditions. Short circuit protector 10 Amp. Fuse in control panel. Diesel Engine Air or Water Cooling Optional. 2000 Watt. 230 Volts External Output. Hand Cranking as well as 12 Volt electric start optional. Hand Cranking as well as 12 Volt electric start optional. Battery charger 12 Volt Dynamo type or electronic(Optional). A. C. Welding Current suitable to run 12/10/08 No Rod continuously and 06 no Rod when in need. Rutile: An electrode for general use which is very flexible in use. Cellulose: An electrode suitable for downward welding. Basic: An electrode for top security technical assembly. This use is recommened for parts under significant mechanical strain. It requires welding under direct current (DC). The maximum diameter of the welding rods is also an important criteria when selecting your Weldart set, do not forget to take this into account. Auxillary Power:  All Weldart welding sets are capable of producing current through their auxillary outlets. They can be used as standard electricity generating sets and the choice of model for this function is subject to the same criteria as the other electricity generating sets in the Vidhata Portable Power range.

• Diesel engine: 10, 12 & 22 H.P
• Max ø rod: 6 mm

Heavy-duty, field-provide design for long life.Four way welding voltage regulator.Low or high current usage switch.Environmental protection for adverse conditions.Diesel Engine Air or Water Cooling Optional.Hand Cranking as well as 12 Volt electric start optional.Hand Cranking as well as 12 Volt electric start optional.

A. C. Welding Current suitable to run 121008 No Rod continuously and 06 no Rod when in need.Short circuit protector 10 Amp. Fuse in control panel.Environmental protection for adverse conditions.Hand Cranking as well as 12 Volt electric start optional.

A welding power supply is a device that provides an electric current to perform welding. Welding Generators are suitable for use in sites where there is no electricity. Welding generators provide DC output suitable for Stick welding. Welding power supplies may also use generators or alternators to convert mechanical energy into electrical energy. Modern designs are usually driven by an Diesel Engines.

Our company is an ace Generator Manufacturer and supplier in India. We offer a wide array of welding generators which are not only easy to use and handle, but are flexible too. Our Welding Generator is used in office, shops, home etc for wielding purpose. We supply a wide range of welding equipment, Welder Generator, Arc Welding Generator according to the clients' needs. Our Welding generators are especially designed to direct welding with adequate current regulator & provision for domestic light supply.

We are positioned amidst the dependable welding diesel generator manufacturers, suppliers and exporters from india, offering a wide range. Understanding how critical power generation is to the quality of welding, the semi brushless welding generator is designed by experts for maximum efficiency. Fitted with current regulator, the welding diesel generators are made suitable for direct welding requirements and operational with quantum of domestic light. features : heavy duty constructionproper voltage regulationpowerfullong service life » specificationsmodelrodmmrod no.domestic light while weldingdomestic light with out weldingphaseamp.hpcylindercoolingrk-22 4/3.158/10700 watt4 kvasingle16/20012singleair/waterrk-23 561.0 kva5 kvasingle20/25020doubleair/water to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.

250Amp. - 400 Amp Burns 6 to 12 No. Rod Latest Weldart Technology Optional Domestic Load of 2KW to 5KW Continous Direct Welding High Volts 230 V Low Volts 60 V Available in water /Air cooled Available in Single/ Double Cylinder 100% Coopper Insulation H Class

• Frequency: 50 -+ 2% Hertz
• Description: Welding Genset
• Prime Mover HP: 12-14

Canon DieselGas welding genset is a low cost genset with multiple functions for welding & electric use. Canon DieselGas welding genset is capable of welding 6-10 no. of welding rod and produce 4 Kw for the electrical use. The Genset operates at peak efficiency, performance & can weld continuously for 48 hours by fulfilling the requirement of water, Diesel & mobile Oil.

We are offering gas welding genset. Canon dieselgas welding genset is a low cost genset with multiple functions for welding & electric use. Canon dieselgas welding genset is capable of welding 6-10 no. Of welding rod and produce 4 kw for the electrical use.

Welding Generators, Air Cooled Block, Silent Generators, Pump Sets, Piston

Welding Generators, Slow Speed Diesel Engines, Silent Generators, Pump Sets

Welding Generators, Automatic welders, welding inverters, Propane torch

Welding Generator, Water Cooled Diesel Engine, Diesel Pumpset