Accurate PMS Private Limited Shahibaug, Ahmedabad, Gujarat

The WD-x range is designed to detect water leaks either at localised points using the WD-PS point sensor or larger areas with the WD-CS cable sensor, a rain sensor is also available. All these sensors are used with the WD-AMX range of modules that are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required. They are fitted as standard with LED indication of the water leak status, and sounder that can be disabled by simply removing a jumper. The WD-AMX relay output can either configured to be manual or auto reset. A relay output provides an alarm signal that can be used for connection to a BMS controller or remote alarm annunciation panel such as the UI-AA1-F WD-CS is easy to lay and detects along its entire length More than one WD-PS can be connected to a WD-AMX Self-contained heater to avoid nuisance alarms on WD-RS

Unique patented alloy composition of LT500 battery protects the lead parts from corrosion, even when the battery is charged with the high voltage. Manyfactured using HADI High pressure casting machine, which helps to maintain void free, uniform grain structure. Extremely high purity, corrosion-resistant proprietary spine alloy ensures longer life. Proprietary spine design ensures uniform distribution of positive active material for extremely long life and superior performance. Extra-strong,flexible oxidation-resistant gauntlet for higher performance and extremely long. Highly puncture-resistant DARAMIC-USA separator minimizes the possibility of internal short circuits. Equally spread positive active material for better functioning and very low top-up. Better and quick charge acceptance. Designed to have a life of over 1250 cycles at 80% Depth of Discharged(DOD)

Cisco Catalyst Express 520 Series Switches are a family of fixed-configuration, Layer 2 managed Ethernet switches that provide the reliability, scalability, and rich feature set your business needs in a cost-effective, easy-to-manage platform. Designed specifically for organizations with fewer than 250 employees, the solutions provide: Wire-speed Fast Ethernet and Gigabit Ethernet connectivity Power over Ethernet (PoE) to provide 15.4 Watts simultaneously on all PoE ports Quality-of-service (QoS) intelligence to prioritize delay-sensitive traffic Robust integrated security to protect management traffic Simple deployment, centralized management, and troubleshooting Scalability to continually incorporate new applications and services over time Easy integration with established architectures without requiring major upgrades to the network infrastructure

Digital disply Charges battery very fast Pre-loaded battery management software Regulated output voltage window during regulated UPS mode. Regulated battery charging from 120V to 120V to 300V. Automatic holiday mode preserves battery charge (Always from home for long fme) Audio alarms & Digital indicator   Sinewave Long Backup Home Ups (700VA TO 10KVA) Pure sine wave output for low noise and smooth operation. SMD based design for better product reliability. Seven segment LED display for proper indication MCB to provide absolute safety. Electronic protection against short circuit. Minimum changeover time from inverter to Mains mode(synchronized changeover) Terminal protections for safety against high internal product temperature Static bypass system for fast changeover & reliability. No load shut-down feature to protect deep discharge of battery and increasing life. Intelligent battery low cutoff to maintain the longer battery life.

We take this opportunity to introduce sealed maintenance free valve regulated lead acid ( 12 V SMF VRLA ) batteries, Tubular batteries and 2 Volt cell for industrial application. We are the distributors and dealer of batteries. We have come into the battery business with lots of experience behind us. We have experienced technical staff for handling installation & commission of batteries and attend to services. These are a preferred 12V VRLA SMF battery brand by most of India’s reputed UPS manufacturers and customers across various segments like Banks, IT Companies, BPOs, Industries, Government Departments, Hospital, and Education Institutes etc. We also design, supply, battery racks & battery interconnection cables ( Uninyvin cables ).This helps a customer in procuring batteries & accessories from one source. This along with our technical experience has helped us in providing excellent service to our customers and getting repeat orders from Inverter Batteries – Long life, low maintenance, super-efficient batteries Automotive Battery – Revolutionary AGCA technology – 80% lower fluid loss, 3 times lower self-discharge, 1.5 times service life. Weather-proof PPCP container and cover assure maximum reserve electrolyte capacity Solar Batteries – Reliable, consistent and low maintenance power for renewable energy requirements. VRLA Batteries – Deep Cycle SMF (Sealed Maintenance Free)/ VRLA (Valve Regulated Lead Acid) batteries for back-up applications We take this opportunity to introduce sealed maintenance free valve regulated lead acid ( 12 V SMF VRLA ) batteries, Tubular batteries and 2 Volt cell for industrial application. We are the distributors and dealer of batteries. We have come into the battery business with lots of experience behind us. We have experienced technical staff for handling installation & commission of batteries and attend to services. These are a preferred 12V VRLA SMF battery brand by most of India’s reputed UPS manufacturers and customers across various segments like Banks, IT Companies, BPOs, Industries, Government Departments, Hospital, and Education Institutes etc. We also design, supply, battery racks & battery interconnection cables ( Uninyvin cables ).This helps a customer in procuring batteries & accessories from one source. This along with our technical experience has helped us in providing excellent service to our customers and getting repeat orders from

It is well known that line voltage which is too high or too low(sometimes even by a few volts)can decreases the efficiency or shortend the life or damage or introduce error in many Electrical,Electronic Or Computer Products.To solve this chronic problem faced by most users,a reliable and stable power source with isolation from the mains input is required. This has been the main consideration while introducing MICROLINE SERVO VOLTAGE STABILISER WITH ISOLATION. SALIENT FEATURES Fully Solid State control circuitry High Efficiency better then 95% Isolation between input and output No Waveform distrotion No effect of Load power factor High Speed of correction up to 35V/sec Short circuit and Overload Protection Visual Alaram for High/Low Voltage Auto/Manual Voltage Correction Oil cooled in higher rating OPTIONAL FEATURES Automatic High/Low Cutoff Audio Alarm at High/Low Input Digital Voltameter,Ammeter,Frequency Meter Extended Input Voltage Range Surge,Spike & Noise Suppressor Single Phasing Preventor Application For preventing data – corruption and failure in computers using hard disc. For the protection of telecommunication and data communication equipment. For the patient’s safety while using machines like ECG, EEG or EMG pacemakers or any electrosurgical aid. For clear recording in audio and video recording equipment. For error free data in process control instruments. For elimination of earthlings problem in computer installation. For protection of CNC/PLC equipment from surges / spikes. SPECIFICATION Single Phase Input voltage:170V to 270V AC Output voltage:230V+/-1% Capacity:1KVA to 100KVA Three Phase Input voltage:(i)360V to 480V AC (ii)320V to 480V AC Output voltage:415V+/-1% Capacity:1KVA to 1500KVA Type:(i)Balance Type (ii)Unbalance Type Frequency:47Hz-51Hz Line Regulation:+/-1% Load Regulation:+/-1% Correction Rate:35V/sec or better Output Waveform:Same as Input Power Factor:0 to 1 Leading or Lagging Isolation:Total Isolation between Input and Output Other Input Voltage Range Single Phase:150V to 300V;120V to 270V Three Phase:360V to 460V;300V to 480V;320V to 500V

The raised floor is ubiquitous feature of data centre. in fact, one common definition of a data centre is that is a computing space with a raised floor. The basic science and engineering of the raised floor was fully developed in the 1960s and was described in detail in the 1983 Federal information Processing Standard 94. The basic design of raised floors has remained relatively unchanged for 40 years. In the telecommunications business the raised floor has never been common. The convergence of telecommunications and IT systems has raised the question of how to decide which approach to use. Recently, more and more IT data centers are being constructed without the use of the raised floor. A review of the history of the raised floor offers insight into this trend.

Rack servers as name says are meant to be kept in rack. Rack servers are designed to meet the business criticality with its reliable and flexibility towards changing IT Technology and providing High performance and low cost solution.A single rack can contain multiple servers stacked one above the other, consolidating network resources and minimizing the required floor space. The rack server configuration also simplifies cabling among network components. In an equipment rack filled with servers, a special cooling system is necessary to prevent excessive heat buildup that would otherwise occur when many power-dissipating components are confined in a small space.

High Resolution 1/4” IT CCD Sony, 480TVL (Color Mode),520TVL(B/W Mode). Weather-proof 24-hours Surveillance ICR true day/night,IP66 standard,lighting & surge protector,high strength metal housing,heater and fan. High Speed Panning Speed 0.1~300° /Sec, tilt Speed 0.1~120° /Sec, preset mode at360° /Sec, accuracy +/-0.1°. High Performance Memory 128 Preset positions(maximum), 3 self-learning auto tracks(120 seconds per track),6 vector scan groups, intelligent power off real time memory, 8 privacy mask zones. Quick Installation Hot plugging technology,wall & suspensory mounting selectable, digital turn over function,built-in multi protocol

With a transformer-free design and sophisticated sensing and control circuitry the 93E is capable of achieving up to a 98.5% efficiency rating, making it one of the most energy-efficient UPSs in its class-and it still provides maximum load protection.Unlike most high efficiency UPSs, the 93E: Provide surge suppression for the load Detects the location of faults ( utility of load) and takes the appropriate action Switches to double-conversion operation in less than 4ms High system efficiency reduces utility cost, extends battery run times and ensures cooler operating conditions.

6-zone system pre-amplifier, with single or dual channel operation Two inputs for call stations Universal input for microphone/line, with speech optimized tone control Three inputs for BGM selection and music optimized tone control Front panel zone selection for BGM and call station zone selection for calls PC and trigger inputs for automated calls, alarm tones and chimes to selected zones.

Robust design and on-line double conversion topology assures maximum reliability Wide input-voltage range appropriate for the harshest electrical environments 0.9 output power factor on 6-20 kVA models Automatic bypass for fault-tolerance Could start on battery power enables portability XL models for long runtime performance Adjustable battery quantity optimises sizing Instuitive front-panel LCD user interface for consistent status indication Inbuilt RS-232, USB & Intelligent Solt Communication ports WINPOWER software suite bundled

IT Rack & Network Rack   IT Server Rack System is designed to offer great versatility in use and is intended primarily to offer excellent space and heat management in the IT, Telecommunication and Electronics field. On the 600mm wide IT Rack 600 the narrow vertical framework offers the maximum in rack space whilst remaining within the 600 wide footprint. This high quality rack has integral plinth for better load distribution and are rated for 750 Kg load carrying capacity. IT Rack Series design is highly adaptive to customized needs and offers user-friendly solutions for variety of applications. 42 U Heights 600 mm X 1200 mm Depth Perforated front and rear doors provide ample ventilation for rack-mount equipment Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design Split rear doors improve access and serviceability to rear of rack mounted equipment Enclosures are shipped standard with both leveling feet and castors Accessories Includes : Keyboard Drawer, Roof Fan, Fix Shelves, Cable Manager, 24 Socket PDU with IEC C13, C19 & Universal 3 Pin Socket

For preventing data – corruption and failure in computers using hard disc. For the protection of telecommunication and data communication equipment. For the patient’s safety while using machines like ECG, EEG or EMG pacemakers or any electrosurgical aid. For clear recording in audio and video recording equipment. For error free data in process control instruments. For elimination of earthlings problem in computer installation. For protection of CNC/PLC equipment from surges / spikes.

With a Chemetron Fire Systems FM-200® system in control, you are assured of fast, efficient and environmentally safe fire relinquishment. FM-200® works to quench fires in seconds and hold damage to a minimum. No facility can afford the loss of time, money or productivity that occurs after a fire. Chemetron FM-200® systems provide safe fire protection for occupied spaces and critical assets they also make good economic sense. FM -2000® is the agent of choice. FM-200® is the clear choice for a fast, clean fire protection agent. Patented by Great Lakes Chemical Corporation as a Halon 1301 replacement 1993 , it has quickly gained acceptance as the world’s leading clean gaseous fire extiguishing agent.

In smaller workplaces, portable fire extinguishers will probably be sufficient to tackle small fires. However, in more complex buildings, or where it is necessary to protect the means of escape and/orthe property or contents of the building, it may be necessary to consider a sprinkler system. Sprinkler systems are traditionally acknowledged as an efficient means of protecting buildings against extensive damage from fire. They are also now acknowledged as an effective means of reducing the risk to life from fire. Systems are being developed which may be suitable for use in workplaces with residential areas, such as care homes and houses in multiple occupancy. Sprinkler systems need to be specifically designed and installed to the appropriate hazard category in accordance with an approved code of practice. We offer Design & Engineering of an integrated Sprinkler System with fine protection engineering standards Network of specially sized or hydraulically designed piping installed in building, structure generally overhead with attached sprinkler in a systematic pattern proper location of alarm valve and orientation as per our best design practice makes us leader in designing this system. We design sprinkler system as per TAC, NBC, Indian and NFPA Standards or guidelines. We design Sprinkler System as per TAC, NBC, Indian and NFPA Standards or guidelines.

A fire hydrant System is an above-ground connection that provides access to a water supply for the purpose of fighting fires. Fire hydrant systems are an installation of pipes, water tanks, pumps, hydrant outlets and/or hose reels. Hydrant Systems can be of two types : (a) External Hydrant System, where the hydrants are installed in the open, like the city or town water mains, or hydrant systems installed in the open areas in industrial or such other occupancies; and (b) Internal Hydrant System, installed in buildings or structures to be protected We design an integrated Hydrant System as per national and international norms. We consider capacity of fire pump, size and arrangement of pipes used for hydrant system, pressure at hydrant point against the available fire risk. Our designed Hydrant System is an arrangement of piping, valves, hose connection and allied equipment installed in building and structure with connection located in such a manner that water can be discharge in stream of spray patterns through attached hose and nozzle for the purpose not only extinguish the fire but at the same time save the occupants and contents of area in with better response time. We design Fire Hydrant System as per TAC, NBC, Indian,OISD and NFPA Standards or guidelines. Almost all part of the premises shall be covered by such system. Our designed system is not only complying the national and international norms or guidelines but also considered the exact requirement to minimize the cost at same time, increase the effectiveness of system for maximum gains

A typical CO2 extinguisher weighs a staggering 18.5 kgs, making it extremely difficult to carry and operate. CO2 also stored at very low temperatures, often causing freeze burns on the user’s hands in the process of activation. A used / unused indicator allows the user to check, at a glance, weather the extingulisher is ready for use. The revolutionary new squeeze grip activation, removes all risk of freeze burn, and ensures that the user can rapidly put the extinguisher to use against a fire. An ergonomically designed handle at the center of the extinguisher distributes the load evenly to the key arm muscles, making the extinguisher easier to carry. Wheels at the base of the extinguisher also significantly improve its portability over long distances.

Microprocessor based Fire Alarm Panel with PA amplifiers system Modular design, plugin in type solid state. Expandable up to 2 to 50 zone fire alarm panel. Each zone with fire open short indication & sound. Mains, AC fail, Rev. Battery, fuse blown,fault indication. Associate with PA system, talk back system etc. Battery charger & Battery Box Gacility. DVD player attachable facility. Gooseneck Microphone attached Compatible with any make smoke & heat detector.

5 analogue loops. 4×40 characters display Configuration by keypad and PC 20 Zone LED (Available up to 200 on special request) 3 serial ports 4 programmable output sounder circuits (monitored) Fire and Fault relay(one each) networking up to 99 control panels Versatile networking (Cu-Cable, Optic Fiber,TCP/IP) VisualeyeZ GUI compatibility Loop-Battery calculator for reliable system design Onlboard diagnostic Meeets requirements of EN54 part 2 and 4 LPCB approved

Get the features you need and the reliability you expect with this value-packed HP Notebook. Enjoy rich, smooth web chats with the stunning HD display and easily take it on the road with a thin design combined with security features to protect your data. Maximize your investment. Keep growing your business, not your expenses. The HP ProDesk 400 G1 Series offers expandable desktop PC options that meet your everyday business needs with enough room to grow. Watch your business flourish while minimizing the total cost of ownership—now that’s a smart investment

LCP Cooling output of 12 kw to 55 Kw with LCP Dx and LCP CW cooling unit Energy saving with high water inlet temperatures (more free cooling) Minimization of operating costs with efficient EC fan technology Spatial separation of cooling and server rack Integral condensate and leakage management Highly developed control concept including onlineconnection Optional cooling of one or two server racks Simple emulation of redundancies Assembly- and service-friendly Integration into RiZone (data centre managementsoftware)

The FAAST LT Aspirating Smoke Detector is designed with the installer and end user in mind. It serves the wide varity of Class C applications where maintenance is difficult, other smoke detection methods are inappropriate or prone to fail due to harsh environments or area where aesthetics matters. It is also suitable for smaller mission critical applications where very early warning – Class A or B detection is required FAAST LT combines proven aspiration detection technologies to deliver reliable smoke detection and efficient installation and maintenance. The device includes high sensitivity laser fre detection, ultrasonic fow sensors, and internal design features to protect vulnerable components from environmental and human threats. The device is fast to install and easy to commission thanks to PIPE UQ LT pipe design and configuration software which is included as standard. FAAST LT stand alone device are available as single channel and dual channel devices, offering flexibility for different detection strategies. A range of customizable settings are geared towards maximizing device performance and meeting different application needs. The detector provides alarm and fault relays with auxiliary events relay as an option. These can be set as latched or non-leached. To accommodate local installation standards or environments, fow and general fault delays can also be set.