Actuators Dealers in Lambha, Ahmedabad

Series 55 pneumatically operated tank bottom valve has a body with attached welding neck and an inlet ports, a diaphragm seal and actuator.   Key Features: Compact design for space restricted applications Simplified welding with provision of welding neck Optimized flow geometry Hermetical separation of fluids from the operating mechanism by diaphragm Fully machined from SS 316L barstock CIP/SIP capable and crevice free Zero dead leg and self-draining capabilities Fully Autoclavable Various internal surface finish available each with less than 0.40 Ra.

• Type: Electric Actuators
• Material: Aluminum
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Available in Many Colors
• Pattern: Plain
• Power: Electronic
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Port Size: 1.1/2inch, 1.1/4inch

Avail from us Three Phase Multi Turn Electrical Actuator which is suitable for the production of Knife Gate Valve, Gate Valve and Sluice Valve. The Three Phase Multi Turn Electrical Actuator we offer is in high demand for use in Power Plant, Water Treatment System, Petroleum Industry, Metallurgy, Chemical Industry, Pharmacy, Paper Industry, Food Processing, Textile Industry, Building Automation, etc. We make available the Three Phase Multi Turn Electrical Actuator at rock bottom prices. Features : Torque : 100 Nm to 2400 Nm Easy mounting, transmitting with equilibrium and low failure rate All joints are armed with waterproofing seal (IP 67) which is suitable for outdoor use Thermo switches embedded in motor winding of actuator will disconnect motor on over heating and protect for burning Basic version with integral starters with modulating controller, remote sensor operated intelligent series Long valve life via soft start up and gradual closing It adopts gear group with small modules fitting which can indicate accurate position of actuators Torque switch will stop the motor automatically in case of over torque in the valve Various Options : Potentiometer Feedback Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC On  Off Type On  Off Type with integral starter unit Standard Voltage : 415V AC Three Phase

• Type: Electric Actuators
• Material: Aluminum
• Color: Blue
• Voltage: 110V, 220V, 380V, 440V, 24V

4.2 Standard Technical Parameter Shell Enclosure :IP67,NEMA4, Exd II CT5 Power Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% MODULATING INPUT SIGNAL : 0-10V, 4-20mA 24VDC/110VDC/220VDC Motor Asynchronous motor Limit switch 2×Open/ Close, SPDT,250VAC 10A Auxiliary limit switch 2×Open/ Close, SPDT,250VAC 10A Torque switch Close/Open, each 1, SPDT,250VAC 10A Except OHQ-005/008/010 Travel 90°±10° 0°～270° Fail safe/ Operating temperature Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ Indicator Continuous position indicator Manual operate Declutching mechanism, operate by handwheel Self-locking device Self-locking by worm and worm gear Mechanical limit 2 × external adjustable stopper Space heater 30W(110V/220VAC) Conduit entry 2 × PF 3/4” Ambient temperature -20℃～+70℃ Lubrication Grease moly（EP type） Material Steel, Aluminum alloy, Aluminum bronze,Polycarbonate Ambient humidity Max 90％ RH Non-Condensing Anti-vibration X Y Z 10g,0.2～34 Hz,30 minutes External coating Dry powder, Epoxy polyester,high anti-corrosion

• Type: linear
• Brand: Cair
• Color: Gray

• METHOD OF TRANSMISSION: RACK AND PINION TYPE
• ACTUATION: DOUBLE ACTING / SINGLE ACTING
• BODY: IC CF8 / CF8M
• CAPS AND RACK: IC CF8 / CF8M
• PINION: AISI S.S.304 / S.S.316
• SEALS: BUNA – N / VITON
• AIR PRESSURE: NORMAL AIR SUPPLY PRESSURE: 4KG/CM² MAX, AIR SUPPLY PRESSURE: 8KG/CM²
• ACTUATOR DESIGN: ISO 5211 (ACTUATOR CAN BE QUICKLY AND EASILY MOUNTING)
• ROTATION: 90° – QUARTER TURN
• TORQUE: UP TO 1069 NM

We are offering stainless steel pneumatic rotary actuator . Specifications method of transmission rack and pinion type actuation double acting single acting body ic cf8 cf8m caps and rack ic cf8 cf8m pinion aisi s.s.304 s.s.316 seals buna – n viton air pressure normal air supply pressure: 4kgcm² max, air supply pressure: 8kgcm² actuator design iso 5211 (actuator can be quickly and easily mounting)

• Pressure: Low Pressure

• Structure: PARKER
• Brand Name: PARKER
• Valve Motion: Built-in meter out flow control valves with reverse flow check valves provide a neat package
• Model Name/Number: HTR Series - Hydraulic Rotary Actuators
• Rated Load: 000 psi (207 bar) non-shock (Except HTR22/45: 2000 psi (138 bar) non-shock)
• Maximum operating pressure: 3000 psi (207 bar) non-shock (Except HTR22/45: 2000 psi (138 bar) non-shock)
• Operating temperature range: Nitrile seals: -40 Degree to 180 DegreeF or -40 Degree to 82 DegreeC. Fluorocarbon seals: -20 Degree to 250 DegreeF or -29 Degree to 121 DegreeC
• Standard rotations: 90 Degree,180 Degree,360 Degree,450 Degree
• Maximum breakaway pressure: 70 psig or 4.8 bar

The Revo Series R range of actuators is ideal for operating quarter-turn valves, especially butterfly, ball and plug valves. Typical applications are 90º or 180º rotary motion and Multiposition function. The linear counter movement of the pistons is transmitted into the required 90º travel by means of the integrated racks of the pistons and the pinion. All Revo actuators are suitable for on/off or modulating control operations. Double-acting actuators are operated by air in both directions (open and closed) whilst single-acting actuators can be supplied with springs to open or close. On air failure these will then go into a fail-safe position.

CPVC Butterfly Valve Pneumatic Actuator, Round Valve Box

Air Damper Actuator

Pneumatic Actuator, Control Valve, Solenoid Valve, manual valves

ball valve actuators, Steam Valve, oil refineries & mills

Electric Valve Actuators

Pneumatic Actuator, PNUMATICS BALL VALVE, PNEUMATICS BUTTERFLY VALVE

Motorized Actuator, Linear Positioning Stages, Laser Hallmarking Machine

Actuators, industrial hydraulic components, electric drives

Diaphragm Actuator