Actuators Valves Dealers in Rakhial, Ahmedabad

  ADVANTAGES OF DIRECT MOUNT ACTUATOR OPERATED BALL VALVE: No need of bracket and coupler : Actuator can mount directly on ISO 5211 integral flange on valve body. ISO 5211 mounting pad is most reliable source for standard fitment. No vibration after long operating period : Even though long operating life, smooth and hassle free results can obtain by non use of bracket and coupler. Stem inserts directly in actuator without use of coupler or any jointing piece. Actuator will operate on actual torque : Stem inserts directly in slots of actuator gives 100 % positive engagements and operates valves on lower and constant operating torque throughout the entire cycle life. Easy to install or dismantling actuator : Actuator can be fitted on mounting flange directly by tightening of four bolts only. User friendly procedure can achieve during install or dismantling actuator on ball valves body. Increase production ration for fast delivery : This design removes unnecessary joints during automation of valves and increase productions with compact, reliable and more economical assemble unit.  

• Type: On Off type, Modulating Type
• Size: 1/2" to 6"
• Flow Pattern: 2 Way & 3 Way
• Actuator Travel: Linear
• Power Failure: Stay put (manual over ride optional)

FFV offer motorized control valves.these Electrical Actuator operated Control valves are design for on-off and throttling applications.these are widely used in oil and gas production industry.Where availability of power supply are in Wide range & from remote controlling room it is been operated.   Features Power supply availability of wide ranges Have less noise pollution Have less maintenance on over all accessories equipped by system Less friction & lubrication Components are lightweight Optional manual override Top indicators optional     Valve Body ASTM A 216 Gr. WCB/A 351 Gr. CF8 / CF8M Protection Class IP 55, IP 65 Enclosure Aluminum pressure die cast Motors Non Blocking A.C. motors/ Class F Power Supply 220/110 V AC 50/60 HZ 1 Phase Trims Stainless Steel 13 Cr Gland Packing & Seals PTFE,Graphoils Pressure Rating 150#,300# Temperature up to 450°C End Flanged to ANSI B16.5

In line with clients variegated requirements, we bring forth a distinguished collection of the 3 Way Diaphragm Operated Pneumatic Control Valve, This valve is manufactured at our ultra-modern production unit utilizing the superb quality raw material and innovative technology in conformance with defined quality standards. Extensively used to control the flow of liquid, air and gas, this valve is tested on various parameters to ensure its quality.

• Application: Hygienic Powder & Slurries, especially in Pharmaceutical Industries. Chemicals and Dyeing Fluids
• SIZE RANGE: 11/2″ TO 8″ (14″ TO 20″ ON REQUEST)
• Body: WCB/CF8/CF8m/Cast Iron
• Disc: WCB/CF8/CF8m/Cast Iron
• Seat: PTFE Replaceable (available EPOM / Viton / Metal to Metal)
• plate Mounting: Namur Standard
• Operation: Hand Lever Type, Worm Gear Box Type, Pneumic Actuated, Electrical Actuated

• Material: Cast Iron
• Syrface Finished: Polished
• Pressure: 10-50 Bar
• Media: Water
• Pack Type: Box

Actuator ball valve, PTFE Lined Ball Valves, Pp Solid Ball Valve

actuator operated ball valve, Industrial Valve, pressure valve

ball valve actuators, Bucket Type Steam Trap, fabricated basket strainers

Actuator Ball Valves, Ptfe Insulated Wire, ptfe thread sealant tape