Adhesive Chemical Dealers in Ahmedabad

We are offering liquid sealant. The liquid sealant widely caters to the needs of plumbing industry and is used as a pipe jointing sealant. This range of liquid sealant is known for good adhesion feature which widely helps in jointing substances. available in sizes30 gram, 50 gram, 100 gram, 200 gram, 500 gram, 1 kgused inplumbing industry.

• CAS No.: 101-02-0
• Molecular Weight: 310.28
• Appearance: Colorless Liquid
• Chemical Name: Triphenyl Phosphite
• Molecular Formula:: C18H15O3P
• Assa: 99% Min

Triphenyl phosphite can be used: As a source of phosphorus and as a ligand for the synthesis of transition metal phosphide nanoparticles via heating-up process. To convert alcohols to alkyl halides. As a peptide coupling agent. As a low-temperature source of singlet oxygen after forming an adduct with ozone.

Directions of use: Mix one botle of Hardener per litre of solution coat the surfaces with mixed solution. Allow to dry until tacky and then press together under maximum pressure and hammer thoroughly.Stir Well Before use. Two Coats for Normal Applications. Three Coats for Critical Applications.

Pioneers in the industry, Ironite® is involved in offering an effective range of Ironite Floor Hardener, which is usually applied over clean concrete surface. These epoxy based 3 component metallic & non-metallic base screed composition. Our range is available in both natural & colored formulations in different packaging as per the client’s requirements. The use of such hardeners makes the flooring durable and decrease recurring expenses in repairs.

Polyvinyl Acetate Emulsions, Offered By Us, are High in Demand in the Worldwide Market for High Performance. Our Assortment of Polyvinyl Acetate Emulsions is Manufactured from the Superior Quality Base Materials to Add Efficiency and Value to It. Perfect for Finishing and Various other Applications, Our Array of Polyvinyl Acetate Emulsions is Easy and Safe to Use.

SSI Polsysol-SP is higher solid and active content polyvinyl acetate emulsion without plasticizer and it gives excellent body and stiffness to the fabric. SSI Polsysol SP is suitable for all types of fabrics.

• Country of Origin: Made in India
• Pack Type: Packet
• Form: Powder
• Brand: Panther
• Packaging Size: 1 Kg
• Shelf Life: 6 Months
• Model Name: PD-COL

• Item Code: HMR070
• Grade Standard: Industrial Grade
• Brand Name: Hammer
• Packaging Size: 1 kg,500 g
• Packaging Type: LD Pouch Packing
• Shelf Life: 9-12 months from the date of manufacturing in unopened and sealed condition
• Form: Liquid

• Brand Name: Astral
• Shelf Life: 3 Year
• Grade: Chemical Grade
• Package Size: 4 Kg

Product Description: "MYMIX - NMF (Floor Hardener)" is a ready to use non-metallic floor hardener based on very high quality natural hard non metallic aggregates. These aggregates play an important role in attributing properties of abrasion and wear resistance.It renders tough, wear resistant, dust free, anti—skid, long lasting and maintenance free floors. It bonds monolithically to the base concrete and is suitable for existing as well as new floors. Suitable Substrates: Concrete floors, residential & commercial area All types of cementitious screeds Advantages: Hardwearing and dust proof floor toppings. Anti-skid and anti-slip in case of oil spillages. Good water proofing properties, hence suitable for rooms and exteriors that are constantly wet. Non-rusting and therefore trouble free Resistant to petrol, diesel and vegetable oils. Abrasion resistant is twice as good as normal concrete. Increases strength and impact resistant. Substantial increase in service life and therefore works out economical Has extremely low shrinkage. Extremely high abrasion resistance. How to Apply: NMF Floor Hardener dry mix is usually applied in two stages. The concrete / compensating under screed base should be free from excess water and sufficiently hardened to allow light foot traffic Two‐ third (about 65 ‐ 70% )of the dry mix should be sprinkled evenly by hand or scoop horizontally And once the material becomes evenly dark, it is floated by wooden float The surface should not be over worked Immediately thereafter, the remaining one – third (30 ‐35%) of the dry mix should be evenly sprinkled in the similar manner vertically, and should be spread evenly Final finish can be done by troweling to give the desired finish with power‐float The weight of power – float should not be less than 60 kg. Particular attention should be paid to edges and corners to ensure full compaction Final troweled floor surface should be cured with conventional curing methods   Packing: 25 kg. Project packing of 40 kg size is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

• Alumina Content :: 80% minimum
• Compressive strength: 1500 kg/cm2
• Flexural strength: 350 kg/cm2
• Tensile shear strength: 170 kg/cm2

ntroduction Ceramic is High value item and it is very brittle under impact To bond ceramic with the steel plate normally one use mortar which has very poor bonding strength with the steel plate and concrete. RealBond Ceramic Bonding Material is Two Part System which gets polymerized and bond nearly any metal, concrete with the ceramic, glass, wood etc with very high strength. Features & Benefits Ceramic filled and hence have nearly the same property of parent material. Superior adhesion to almost all clean surfaces. Protection against corrosion, abrasion etc. Gets cured in short time and increases the work output.

Tile Hardener, blue iron oxide, Colour Mixing Machine, Concrete Admixture

• Packaging Type: Sack
• State: Powder
• Shelf Life: 12 months
• Packing Size: 50 Kg
• Flexural Strength: 14.7 Mpa
• Compressive Strength: 109.3 Mpa
• Purity: 99%

We are the manufacturers and supplier of this products.

JAGRUTI brand Solutions are the largest selling brand in India. Professionals all over rely only on JAGRUTI for a perfect job. Jointing of Rubber Conveyor Belts, Rubber Flat Belts, Rubber Sheets etc., is done quicker and better with Solution. Salient features of Plate Belt Fasteners offered by us:   Faster curing Reduces down time Ease of application Adequate tack retention time Longer shelf life

We are offering pva emulsion.

Adhesion promoter for paints, speciality adhesion promoter for waterborne ink, hardness improver in paints and inks etc....

polymer adhesives

non adhesive chemicals, Sealants

lime binders, ADHESIVE

polyvinyl acetate emulsion, toluene chemical, Manganese Acetate, para xylene

adhesive chemical, Furnace Oil, Carbon Black, Industrial Chemical

flooring adhesive chemicals, Adhesives, ceramic industry chemical

Metallic Floor Hardener, Cast Iron Powder, Emery Grain

Non-Metallic Floor Hardener, Shali Seal PU II

Plastic Bonding Adhesive, Thread Locker Adhesive, Vehicle Body Sealants

cold vulcanizing solution, Conveyor belts, Pulley Lagging Sheet

Lime Binder, wood fire water heater, synthetic wood adhesive