Agricultural Equipment Dealers in Vinzol, Ahmedabad

• BRAND: VGT INDIA
• ENGINE TYPE: Air-cooled, four stroke engine
• RATED /MAX POWER: 3.3/4
• OIL TANK: (L)4
• WALKING PART: Walking part -Wheel Rubber tire Dia 660mm
• ROW NUMBER: 6 (Row spacing(cm) 30)
• OVERALL DIMENSION: 2640 x 2150 x 1300 mm

• Type: Horizontal/Vertical Orientation,Mechanical/Hydraulic Type Agitator
• Color: Custom
• Shape: Square/Round
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)/D/P/D/A/Other
• Usage/Application: Storage or Mixing Application
• Brand Name: Krish
• Model Number: Any
• Material: MS IS 2062 GR. A/B,SA 516 GR. 60/70,SA 240 GR. 304/304L/316/316L/316TI,Aluminium Alloy 99.7% Full
• Power: Custom
• Size: Custom
• Features: Long Lasting Life,Zero Maintenance,Fit&Forget It

• Hopper capacity: Liters
• Screen area: 388 mm (W) x 762 mm (L)
• Oscillation: 110 Per Minute.
• Output: 30 to 75 Kgs./Hr.

Salient Features: Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

• Condition: New
• Charge: to Charge 6 Vdc Battery
• Voltage: Input Voltage 230 A.c. 50 Cycle Out Put Voltage 6 V Dc
• Weight: 430gm
• Size: 5’x3. 75’’x2.75’
• Colour: Multi Colour

Capious Chip Spreader is constructed with 12mm and 8mm Steel Plates & Square Pipes. It can be mount on standard tipper and Tractor Trolley. 2500mm spreading width The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off System

Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.

  We are one of the top most company of the principal Trolley Mounted Sprayermanufacturers in India. Our Trolley Mounted Bitumen Sprayer is highly appreciated due to their unmatched quality and performance on a high scale. Clients not only from national but international markets are giving orders for trolley mounted sprayer. The raw materials that we use for the manufacturing of trolley mounted sprayer are of the best quality and acquired from genuine dealer. They ensure high durability and resistance in various unfavorable conditions. We provide our trolley mounted sprayer on a large scale to domestic markets.  

APPLICATION : MIXING BOWL AND COVER: in three section • The mixing bowl is fabricated with S.S. 316. The bowl is specially design in three sections. The flat bottom, mid portion is cylindrical and the top portion is conical. This design helps the machine to move efficiently. The machine is provided with the counter balanced lid. The lid is provided with the vents, charging openings and view ports. THE MAIN IMPELLER AND DRIVE: The main impeller is consisting of dual speed 750/1500 synchronous dual HP TEFC motor, coupled through a belt drive to a worm reduction gearbox with chain coupling. The machine is consisting of specially designed bearing housing to drive the impellers. The impeller does the mixing at the bottom and at the centre of the bowl. The inside wash facility is been very helpful for quick change over. The bearing housing prevents the leakage of the powder from the bottom entry. This design leads to longer life of the gear box. CHOPPER: The dual HP dual speed (1440/2800 synchronous) TEFC MOTOR is given for the chopper. The motor shaft is made up of S.S. The chopper is consists of 4 blade S.S. impeller. The assembly mounted in the bowl horizontally in which the shaft is integral with the motor. DISCHARGE PORT: The discharge port has vertical downward opening and is mounted horizontally. The pneumatic cylinder is used to operate the opening. MOUNTING: At the bottom, the drive assembly is mounted by the channel frame. The sturdy channel frame is made of M.S. On the top, the bowl is mounted. The platform is provided by the S.S. staircase and railings. The S.S. dimpled plates cover the half of the platform. The area under the bowl is covered with S.S., for the easy and safe movement of the operator. The entire body of the machine is covered with the S.S. covers. CONTROL PANEL: The control panel is situated on the platform. The control panel is provided with for the slow, fast, on, off functions the actuator manual and auto controls timer. Ammeter/ voltmeter for the motors Pressure gauge and indicator light Air regulator and air filter The PLC based control panel can be provided if required. MAIN PANEL: The main panel consists of MCCB, and the wires are given the numbers for the easy operation. SPECIAL FEATURES: The shaft is covered by the air purged shaft seal. In built cleaning system for the shaft seals. To reduce the vibration and for the better transmission, the fanner taper lock pulley is given. The oil seals and sleeves are provided to main bearing housing to prevent the leakages and cross contamination. To prevent the entry of the powder into the impellers and jamming the pressure switch control is provided.   The chopper can not operate directly or independently due to the circuits, with interlock contactors. To regulate the discharge plunger the 3 position solenoid valves are given which helps to open and close at desired levels. The non return valve and water inlet/outlet connections are given with the pneumatic circuit for the washing of the main impeller assembly without dismantling. SAFETY FEATURES: Motor is provided with the locking system to eliminate the accidents. The moving parts are enclosed for the safety. PNEUMATIC SYSTEM:The pneumatic systems require the air pressure of 3 to 5 kgs/sq cm. To operate the discharge valve. The air filter pressure gauge 2 way solenoid valve. The pipes ferules and pneumatic fittings.

• Screen area: 388 mm (W) x 762 mm (L)
• Output *: 30 to 90 Kgs./Hr.

If you are looking for high performance Pharmaceutical granulator machine than Ganesh technology is the right destination for all your quaries. We are supplier and exporter of all equipment related to solid dosage form department. Our line includes granulators, fluid bed dryers, powder mixing equipment, blenders, tumblers, Pharmaceutical siever machine and many more.

• Power: 1HP
• Automation Grade: Semi-Automatic
• Voltage: 415 V
• Country of Origin: India
• Brand Name: Crown Pharma Machinery
• Charging Height: 1135 + 5 mm
• Discharging Height: 655 + 5 mm
• Oscillation: 110 Per Minute
• Output: 30 to 75 kg/hr
• Screen Area: 388 mm (W) x 762 mm (L)
• Stirrer Size: 138 mm x 368 mm
• Rotor Speed: 1440 RPM
• Hopper Capacity: 33 L
• Supply Ability: 10 Piece Per Week

We feel immense pleasure to inform you our new launched product i.e. Chip Spreader. It is constructed using the high graded stainless steel plates & square pipes with 12mm and 8mm   It is mounted on standard tipper Spreading width is of 2500mm The drive is transmitted from the tyre through dog clutch mounted on lay shaft Easy clutch & cut off system.

• Brand Name: SAHARA
• Material: Steel
• Finishing: Polished
• Color: Black
• Application: Cutting Use
• Length: 10-15inch
• Feature: Corrosion Proof
• Type: Hand Sickle
• Country of Origin: India

Khurpa sickle use for weeding purpose also for cutting branches.

Single Double - Chamber Vacuum spary thanks are used for calibrating and cooling of RPVC and HDPE pipes in vacuum sizing.   Standard Features : Tank with Mild Steel construction Mechanical seal spray pump with high head and high flow rate Mechanical seal vacuum pump Manual longitudinal adjustment on rail Precise Water level control system with visual manometer Water temperature control with thermostat and solenoid valve Dual transparent chilled water inlet filter system for cleaning during operation Height and side manual adjustment Appropriate working platform with aluminium chequred plate Common drain header with 4” x 2nos. Connection 1.5” inlet connedtion Easily cleanable spray nozzles Optional Features : Tank with Stainless Steel contruction Adjustable spray nozzles pipes (above HVT-250 model) Motorized Longitudinal adjustment on rail All piping including spray pipe with stainless steel Insulation on outer side of the tank Special imported spray nozzles Pipe support with central height adjustment Dual disc type water filter in spray pumps with 200m mesh (manual back flushing) Glycerin filled pressure gauge on disc type water filter to see blockage of filter

With the aid of modern storage facility and diligent professionals, we are capable to fulfill quick and voluminous requirements of the clients. Also, we ensure complete safety of the stored products. Being a client-centric firm, we are dedicatedly involved in making available quality Spray Nozzles.

• Color: GREEN
• Material: FRP , Fiber glass
• Dimension: 1000 X 1000 X 1000 MM
• Usage/Application: BIO TANK
• WEATHER PROOF: RUST PROOF
• THICKNESS 6 MM: PORTABLE
• MOQ FRP: ORIGIN AHMEDABAD
• Operating Temperature: NORMAL
• Brand: Needhi
• Storage Capacity: 1000 LT.
• Dimention: 1*1*1 meter

Rotational Moulds India's No. 1 Manufacturer Jaljog Rotomould is one of the leading experts in manufacturing quality molds for rotational molding.  We have sound industry knowledge and expertise in creating different kinds and sizes of molds.  

• Color: black
• Product Name: Sprayer
• Usage: Road Construction

Bitumen Sprayer

• Application: Constructional,Bitumen Spraying
• Feature: Hassle free performance, Heat resistance , Durability
• Model Name/Number: QBS 25
• Capacity: 2500 L
• Air Pressure: 10 bar
• Automation Grade: Semi-Automatic
• Tank Material: MS Plate
• Fuel Type: Diesel

• Application: Industrial
• Pressure: 3 Bar
• Material: PVC
• Thread Size: 1/8" BSPT
• Brand Name: Vallabh
• Country of Origin: Made in India

• Automatic Grade: Automatic
• Size: As Per Requirement
• Material Grade: SS
• Design Type: Standard
•  :  

• Voltage: 220-380V
• Frequency: 50-60Hz
• Phase: 3 Phase
• Material: Mild Steel
• Automatic Grade: Automatic
• Electric Motor: 20-25 HP
• Finishing: Painted
• Power Source: Electric  

The Aspiration System can be connected to heater mixer, cooler Mixer & Pressure Conveying System Directly. During mixing process, the temperature of the product mix gets elevated due to friction at the same time chlorine gas is also liberated, which is efficiently removed by vacuum. This will help to control VCM content in PVC Dry blend. This System also helps to reduce odor generated due to additional of metal stabilizer, plasticizer and other additives. This Aspiration system reduces build up or settling of mixing powder on the heater mixer lid. This will eliminate contamination mixing into dry blend during discharge from heater mixer.

• Disinfection Tank: Storage Capacity 30 to 40 Liters having Low Level Indicator
• Overall Size (L x W x H): 6.0 Ft x 4.0’ Ft x 7.9 Ft
• Working Voltage: 1 Ph. 230 V AC ± 10 %
• Material for Chamber: Mild Steel Sheet of 14 to 18 SWG Tks with Powder Coating
• Working Environment: Ambient
• Rain Protective: Tunnel Chamber. Suitable for Indoor Operation (open Access Entry are Not Rain Protected)
• Compartment Lengths: Hand Sanitizing – 3.5 Ft x 2.9 Ft & Body Sanitizing – 4.0 Ft x 3.3 Ft
• Spraying Method: By 60 Deg 4 to 6 Ss Nozzles with Adjustable Delay as Required
• Nozzles Spray Isolated: PVC Curtain at Entry & Exit of Disinfecting Chamber
• Disinfection Type: Any Water Based Diluted Solution. (Not in our scope of Supply)
• Hand Disinfection Type: Automatic Non-Contact Disposable Disinfectant
• Sensor at Entry Point: 16” to 24” As person enters the tunnel it will activate operations
• Digital Counter: 12” to 15” to count no. of person entering in Disinfecting Tunnel
• Tunnel Lights: LED based, 220V AC Light with for Spray Area. LED based
• Movability: 04 Nos Nylon Rubber Coated Wheel for ease Transportation
• Stairs Case: Folding Aluminum Chequerd Plate Step at Entry & Exit.

• Driven Type: Electric
• Condition: New
• Material: SS316
• Automation Grade: Semi-Automatic
• Machine Dimension: 710 (L)x 420(B)x 1220 (H)
• Frequency (Hz): 50 Hz
• Voltage (V): 440 V
• Phase: 3 Phase

Lifting Chamber Baler for Polyester Fiber offeredcomes in special designed finish that successfully match up to the bailing demands of textile recycling industry. These advanced technology based systems find use by textile manufacturers and used clothes recyclers for producing compact bales in different sizes. Some of its features include simple to operate interface, simple lifting chamber that make for simple tying and wrapping action, comes with easy ejection support, automatic operations with one button functioning, allows production of bale weights from 280 Kgs to 450 Kgs, comes with press force of up to 150 tons, choice of different model choices, suitable for bailing of used shoes, used clothing, second-hand clothes, towels, rags, textile fiber and other textile waste. Baling Applications: Second-hand clothes Towels Used shoes Used clothing Rags Textile fiber and other textile waste. Choose from our various models below, or contact us for a customized baling solution. Main Features Lifting Chamber Door For easy operation and promoting work efficiency (simply press a button and the chamber will be lifted automatically before strapping) View image Cross Strapping For making tighter and tidier bales. View image Availability for Bale Wrapping Either plastic bag/sheet or woven bag/sheet can be used as the wrapping material, protecting the textile material from getting damp or stained Elevated Front Feeding Door & Side Board For better protecting operators when platen moves upwards and downwards.

• Type: Farm Equipment
• Application: Agriculture, Cultivation
• Weight: 100-500kg
• Color: Blue, Orange, White
• Condition: New, Used
• Automatic Grade: Fully Automatic, Manual, Semi Automatic
• Driven Type: Hydraulic, Pneumatic
• Warranty: 1year, 2year, 3year
• Ground Clearance: 400-450mm, 450-500mm

We are the manufacturers, exporters and supplier of this products.

English Agro is engaged in manufacturing and supplying of excellent quality Venturi Injector. Fertilizer Injector is manufactured from superior quality raw materials. Based on the requirements of the clients Venturi Injector available in different sizes. Fertilizer Injector can be using existing water pressure and is perfectly adaptable for all Drip & Sprinkler Irrigation Systems. The Process of Installation of Venturi Injector is very easy. Fertilizer Injector is available in Plain Socket End & Screw End. SIZE AVAILABLE ¾”, 1” , 2” FEATURES and SPECIFICATION Venturi Design Innovative Venturi Design for more injection Rate. Addition Valve Provided Additional Valve provided for suction side to prevent reverse flow of water. Additional Suction Filter To avoid entry of solid particles in system, additional suction filter is provided. Protective from corrosive chemicals and chemical resistance. Excellent ultraviolet resistivity due to presence of carbon black. Highly efficient and compact differential pressure injection device. Economical and low cost option. Venturi Injector is mostly used for Fertilizer and chemical injection through drip and sprinkler irrigation systems.

• Country of Origin: Made in India
• Brand: airtech
• I Deal In: New Only
• Capacity: 2-2.5 ton /HR
• Material: Mild Steel

• Certification: ISO9001
• Condition: New
• Color: Requirements
• Warranty: 1 Year
• Packaging Details: As per Customers Requirement
• Product Name: Mini Tiller Cultivator Power Tillers Rotavator Plough
• Place of Origin: Gujarat, India
• Power Type: Customize
• Port: Mundra Port, Gujarat, India
• Usage: Ploughing Soil
• Product Type: Agriculture Machinery Equipment
• Working Width: 1350mm
• Item: Rotary Cultivator Tiller
• Model Number: HE001
• Supply Ability: 150 Piece/Pieces per Month
• Engine: Diesel Optional
• Use: Farm