Air Dryers Dealers in Vatva, Ahmedabad

We are a trusted Manufacturer and Supplier of Split Flow No Purge Loss Dryer from India. Our Split Flow No Purge Loss Dryer is known for its sturdy construction, durability and high performance. These Split Flow No Purge Loss Dryers are offered at market leading prices. Advantages No purge loss. No need of blower. No used of external air thus eliminating risk of contamination. Most economical in the range from 400 CFM onwards                                                                                                                                                                                                                                                            

• Country of Origin: Made in India
• Usage: Industrial/Food
• Dryer Type: Regenerative Desiccant Dryer
• I Deal In: New Only
• Automation Grade: Automatic

We are offering dehumidifier air dryer. the megna series is the highest state-of-the-art dehumidifying line of the entire range, combining all the characteristics and the performance of the megna series with a very innovative user interface equipped with a highly intuitive touch-screen panel. The machine operating status is shown in real time on the screen and all the parameters are available in graphical form. an online help service provides a useful support for the operator. Among the standard equipment features are dew point control and a weekly timer. The user can set the required language on the control panel. • no air adaptability • touch screen user interface • high performance: dew point -75°c • total regeneration energy recovery new crystallizer realized to guarantee the maximum reliability in the crystallizing process, sturdiness, easy maintenance and parts inspection. Equipped with plc control, touch-screen panel and innovative opening system of the hopper. Particularly strong agitating shaft, equipped with interchangeable blades and bridge break device. the motor is connected to the shaft by a epicyclic reduction and coupling joint. The strong shaft is center lined into the hopper in order to avoid any misalignment. The crystallizer is equipped with powder remover as standard in the exhaust air circuit and it complies with the last regulations of the ce directives. • touch-screen control • access to cone via innovative opening design • powder remover as standard • interchangeable blades of the agitating shaft

• Capacity: Upto 1500 CFM
• Dryer Horse Power (HP): 2 HP
• Drying Capacity (in cfm): 40 cfm
• Maximum Pressure (in bar): 4 bar
• Operating pressure: 7 Kg/ cm2
• Inlet Temperature: 35 Degree C to 55 Degree C

• Brand Name: Laxmi Group
• Material: Use high grade components
• Condition: Good
• Type: Air Separating System
• Country of Origin: Ahmedabad,Gujrat
• Min. Order Quantity: As per client requirement

We bring forth our premium range of Air Separating System at modest rates. Located in Gujarat, India, we are regarded as a trustworthy Manufacturer, Exporter & Supplier of Air Separating System. Our skilled experts use high grade components and latest technology for fabricating the system. Owing to our efficient logistic network, customers can rely on us for timely delivery of Air Separating System all over the world.   Ideal For : Pigment Colors - Minerals & Ores - Chemicals Technical Products Dyestuffs - Fertilizer - Insecticides - Pesticides. Particle size is finer and more uniform than Laxmi En Fab Air classifier Features: Strong construction of mechanism and casing ensures long life Close control over product uniformity Special liners are available for processing abrasive materials. Particles are reduced to finer and more uniform sizes. Use of cyclone separator lead to less dusting on output side No dusting from feeding hopper because feeding is done under negative pressure It runs at lower speed, hence it requires much less maintenance that obtained from machine using screen No dusting from feeding hopper because feeding is done under negative pressure. Less dusting on output side because of use of cyclone separator. It uses air-classification witch does require screen , Hence the problems associated with screen like choking, painting and frequent replacement of screen do not arise. Easy to clean and wash. It is manually fed as a normal practice. However, it can be supplied with automatic feeding also It runs at low speed compared to machines using screen, hence much lass maintenance Details : This classification equipment that finds extensive use in research laboratories. Used for achieving uniform drying of material within a fraction seconds, this machine is highly demanded by our clients based in domestic market. Laxmi En Fab is leading manufacturers of Industrial classifier in Ahmedabad, Manufacturer of air classifier in ahmedabad and supply this classifier in different city of Gujarat, Rajasthan, Maharashtra, Bangalore, Chhatishgath, Punjab, Karnataka, Assam, Haryana, Tamilnadu, Kolkatta, Madhya Pradesh, like Faridabad, Bhavnagar, Ankleshwar, Vadodara, Baroda, Kadi, Surat, Mumbai, Pune, Tane, Silvasaa, Chandrapur, Rangareddy, Siddipet, Ratanagiri, Siddipet, Ratanagiri, Raigad, Bhopal, Sircilla, Cuddalore and different city in India and also export this classification system in developing country

• Material: SS MATERIAL,STAINLESS STEEL-304
• Warranty: 1 YEAR OF MANUFACTURING
• Color: WHITE & GREY
• Size: 25KG TO 2000KG

PLASTIC GRANULE DRYER 25KG TO 2000KG 

• Frequency: 50-60Hz
• Packaging Type: Packet, Carton Box
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Specialities: Precise Design, Fine Finish
• Dryer Capacity: 20-50Kg, 50-60Kg, 60-100Kg Per Batch
• Type: Refrigerated Air Dryers
• Brand Name: RAPID
• Color: BLUE WHITE RED
• Voltage: 220V
• Condition: New
• Display Type: Digital
• Finishing: Powder Coated
• Power Source: Electric
• Automatic: Fully Automatic
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Usage: USED IN ALL INDUSTRIES
• Connection Type: 1/2'' 1''
• Working Temperature: 45C
• Max Temperature: 55C
• Moisture Removal: 100%

• Material: Mild Steel
• Dryer Horse Power: 20 HP
• Air Flow Rate: 200 to 5000 CFM
• Ambient Temperature: 45 Degree C
• Pressure Dew Point: 2-10 Degree C
• Working Pressure: 1.0 Mpa

• Brand Name: Rang Refrigeration
• Application: Industrial/Air conditioner

eatures   Heatless Regenerative Desiccant Air Dryer Designed for consistent-pressure dew points, eliminate water and freeze-up in low ambient temperatures     Heatless Regenerative Desiccant Air Dryer provideclean,dry,compressedair due to effective moisture separation&extremely reliable and requires little maintenance with very few moving parts     Heatless Regenerative Desiccant Air Dryer come completely assembled, piped and wired, with a full charge of activated Alumina Desiccant, generally have a small footprint taking up less valuable factory floor space

Refrigerated Air Dryer will remove moisture from compressed air and it will protect pneumatic system & unnecessary expense of maintaining pneumatic cylinders Refrigerated air drier will give you -23 degre dew point air ( almost 99% dry air )Refrigerated air driers are available from 12 kg/cm2 to 50 Kg/cm2 working pressure. All Refrigerated air drier have timer base automatic drain valve which removes moisture at regular interval.

Moisture, either liquid or vapor, is present in compressed air as it exits the compressor system. If this moisture is not properly removed, your compressed air system can lose efficiency and require dramatically increased maintenance, which can result in costly downtime.The majority of pneumatic instruments and processes can not tolerate hot compressed air, compressors are normally supplied with after-coolers and moisture separators. After-coolers are heat exchangers that utilize either water or ambient air to cool the compressed air. As the water and lubricant vapors within the compressed air cool, a significant amount condenses into liquid. An after-cooler discharging compressed air at 100F passes 67 gallons of water per 1,000 scfm per 24 hours.To avoid these problems, compressed air systems have purification devices available to remove the water vapor and other contaminants. The proper selection of these devices is critical as pneumatic applications and compressed air systems become increasingly sophisticated. Condensing Temperature control for ambient Temperature variations. Hot gas by-pass circuit for partial load. Maintains constant pressure dew point. The advanced mimic display indicates the functions & faults if any. Trident Automatic Drain Valve provided in Demister & Heat exchangers for effective Dryer functioning

AirGas drying takes place by adsorption. Dry Air from chamber-A outlet then passes through the outlet valve assembly and through the after-filter to the dry gas receiver tank. A Heatless Air Dryer is the simplest form of desiccant type gas or air dryer for achieving a dew point of -40 deg Celsius or better for compressed air systems and other gas and air dryer application.

We are air dryer manufacturer, supplier and exporter in india.

Refrigerated air dryers are the most advanced and cheapest mode of drying compressed air. This dryer operates on the principle that cooling of the compressed air. causes condensation of water carried by the compressed air in vapour form. In the refrigerated type of air dryer the cooling takes place in two stages. The compressed air at about 40 Degree C, which enters the Refrigerated type air dryer, first enters the Precoofer . In the precooler the incoming hot-wet air is cooled by the outgoing cool-dry air. In the bargain the outgoing cool-dry is heated upto operating temperature of about 28 – 32 degree C.The hot-wet air, now partially cooled. enters the evaporator. In the evaporator, this partially cool air is chilled down to a temperature of about 2 to 8 degree C. Due to this chilling, the moisture carried by air in vapour form is condensed. This chilled air, carrying condensed moisture, then travels into the moisture separator. The moisture separator is a mechanical equipment, in which the condensed moisture is separated from the air by mechanical action. This moisture is drained out from the moisture separator with the help of an automatic drain valve. This dry-cool air is then passes through the precooler as discussed before. By this process you get dry air at the outlet with a pressure dew point temperature of about 4 Degree C or as required. (but above 2 degree C). In case of refrigerated air dryers, the power consumption for air dry- ing is approximately 5.0 kwh for 1000 cubic feet per minute of air.       Inlet Air Temperature 40 Degree C Pressure Dew Point : 2 Degree C to 5 Degree C Automatic Drain Valve provided in all Models Normal working Pressure : Max. 12 Kg/Cm2 High pressure models up to 50 Kg/Cm2 are also available.

• Frequency: 10-20Hz
• Power: 5kW
• Voltage: 220V
• Power Source: Electric
• Automatic: Automatic
• Hsn Code: 8477

Tray Dryer High Effective Hot Air Re-circulation - Tray Drying Technic Application & Process : Tray Drying Ovens are used for drying of pharmaceutical powders, granules, Pigments, Food, Bakery, Electrodes, Chemical, and Plastic etc in an effective and economical way by hot air re-circulation. Tray dryer is an enclosed insulated chamber in which trays are placed on top of each other. Heat transfer is done by circulation of hot air by electric heaters or any other heating media. Blower fans are installed inside to ensure proper circulation and transfer of heat.   Salient Features : Available in 24, 48, 96 & 192 Trays. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316/304 & non contact parts AISI 304/ M.S. with painted. Highly effective uniform air re-circulating system by low speed fan. Inlet air filter and damper at inlet and exhaust air damper for air flow controls. Controls panel with Digital temperature controller and process timer controller. Mobile trolleys are provided which are used to load and unload the trays into the dryer. Optional Features : Heating system Electrical / Steam / Gas Heating. Separate Inlet AHU with HEPA Filtration. Perforated tray Standard Painted Model. Safety Features : Automatic Temperature & controls, Process cycle controls. Overload relay Protection and Emergency stop button