Air Operated Diaphragm Pump Dealers in Isanpur, Ahmedabad

DEPA® Air Operated Diaphragm Pumps, High Pressure Pumps, Series DB DEPA® Air Operated Diaphragm Pumps are a cost-effective alternative in pressure-maintaining operation since any elaborate and costly closed-loop or open-loop control is dispensed with. Overview DEPA® Air Operated High Pressure Diaphragm Pumps (series-M), type DB, are preferred by filter press operators. The DEPA® high pressure pumps are factory set to 13bar (188psi), 16bar (232psi) or 21 bar (305psi). They can be operated at the required working point. The variable pressures possible with the DEPA® pumps protect the filter press while the short filling cycles improve the productivity of the entire filter process. There are 3 sizes available so that the pumps can be individually adapted to requirements of the transfer tasks. While the body is made of cast stainless steel, various elastomer materials for diaphragms, valve seat,s and valve balls are also available.  

The assistance of our experienced quality analyst guarantees us that we make use of quality raw materials for the production of our entire range. Therefore, our buyers enjoy flawless products. Reckoned as outstanding suppliers of AODD Pumps; we are a reliable choice amidst the customers.

the aodd pump is double pumps in one. Chambers a & b are alternatively filled and emptied by drawing liquid in through a common inlet © and out through a common outlet (d). The diaphragms in each chamber are connected by a common shaft so that they move., backwards together. Compressed dry air is directed by the air valve (e) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flow-rate can be infinitely controlled by increasing or decreasing or decreasing air pressure and or volume.   the media aodd pump can handle a full list of chemicals and recommended elastomers is available on request. Or our sales office advice on the best pump & materials for specific media, we are #1 supplier / manufacturer of air operated double diaphragm pump in india. Contact air-operated double diaphragm (aodd) pump manufacturer, air operated double diaphragm pump supplier in india. typical range of products you can pump. abrasives: – clay slip, titanium dioxide, frit, mill scale. alcohols acids: – all mineral and organic acids. cement: – cement, mortar. cosmetics: – creams, emulsions, detergents. caustics ceramics: – slip glazes, clay. drilling: – mud, grout, lubricants. drinks: – soft drinks, spirits, beer, wine, milk. explosives: – suspensions of gun powder explosive, etc. inks & dyes: – printing inks, driers, dyes, sixes and solvents. foods :- liquid amd semi-solid foods, flavourings. oils :- petrol , diesel , hydraulic and cutting oils , lube oils , animal and vegetables oils and greases. pulps :- paper , wood sizes bleaches resins :- natural and synthetics , water and solvent based,monomeric and polymeric plastics. sludge & waste :- sewage , effluents , coal and lime slurry. solvents :- aromatic and allphatics , ketones , aldehydes, esters and chlorinated hydrocarbons , de-icing fluids. water :- all types. timber preservatives: – creosote, turpentine, copper, napthenate. paint :- emulsions , latexes , pigments , solvent , resins , thinners, pharmaceuticals :- liquids , creams and compounds. plating :- aggressive acids , salts , sludge and effluents. rubber :- natural and synthetic.     operation sequence the blue arrows show the pump cycle. Fluid is being drawn into inlet ( c) by the suction stroke of the diaphragm in chamber b, which opens the ball valve (1) to allow liquid to enter the chamber ,ball valve (3) is closed by the diaphragm suction. in chamber (a) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (4) to the liquid outlet (d). This discharge stroke closes ball valve (2) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow o outlet d. standard aodd pumps are one : one ratio-maximum outlet pressure never exceed air supply pressure.   applications to handle viscous chemicals , slurries. to transfer explosive liquids , solvents , acids. pharmaceutical liquids creams and compounds. semi solid foods , flavours , drinks , wine , beer , alchohols. waste water , sewage effluents , coal and lime slurry. hydrocarbons , petrol diesel , lubrication oil , vegetable oil. paints emulsions , pigments , thinners , resins. ceramics , slip , gazes , clays.     advantages of aodd pump no seal , no leakage, self priming , no need of foot valve, variable flow with same pump. can be submerge. less stock of spare to be maintain. no skill person is needed to operation and repair pump. light weight , handy in use. no rotation , no wear & tear hence low maintenance , no charging. pump can run dry. stop automatic on closing of discharge valve. can handle 2 to 10 mm size solid particles. also can be used upto accuracy 3 to 5% no motor , no fire. in short very simple and versatile pump.   operation principle dry air is given as input to air valve. Air will push both diaphragm alternatively. four ball valves will act as nrv for suction and delivery. as per liquid compatibility moc of diaphragm, valve and wetted part selected.

Approx Price: Rs 1.8 Lakh / Piece Minimum Order Quantity: 10 Piece Product Details: Brand Sai With our rich industry experience, we are engaged in manufacturing, trading and supplying an extensive assortment of AOD Bolted Pump. Our offered pump is manufactured with the premium grade components and advanced technology under the surveillance of our experienced professionals. Our provided pump is available in different technical specifications for our clients. Apart from this, the offered pump is tested against varied quality parameters to ensure its optimum quality. Technical Specifications: Max Flow Rate 900Lpm (238gpm) Port Size: Inlet: 76.20mm (3"BSP) Discharge:76.20mm (3"BSP) Air Inlet: 12.70mm (1/2"BSP) Air Exhaust: 19.05mm (3/4"BSP) Suction Lift Dry: 6.09m (20') Wet: 7.62m (25') Teflon Dry: 3.05m (10') Wet: 6.09m (20') Max Particle Size (Dia) 19.10mm (0.750") Additional Information: Item Code: 800-PP

• Head: 50 Mtr.
• Flow: 45 m3 / hr.
• Temp: 120 °C
• M.O.C.:: Investment Casting CF8M (SS-316), Aluminum, PP, PVDF
• Max. Particle Size: 6.35 mm
• Air Pressure: Max. 7 Kg / Cm2
• Air Inlet Size: 1/4 to 1/2″
• Air Exhaust: 3/4 to 1/2″
• Suction Lift:: Dry: 4.57 Meter / Wet: 7.6 M
• Teflon:: Dry: 3.05 M / Wet: 6.09 M

Max Flow Rate: 586 Lpm (155gpm) 2" BSP (50mm) PP / PVDF Port Size: Inlet: 50.80mm (2" BSP) Discharge: 50.80mm (2" BSP) Air Inlet: 12.70mm ( 3/8" BSP) Air Exhaust: 19.05mm ( 3/4" BSP) Suction Lift: Dry: 4.57mm(15') Wet: 7.62mm (25') Teflon: Dry: 3.05mm( 10') Wet: 6.09mm (20') Max Particle Size (Dia.): 6.35mm (0.250")