Air Pumps Dealers in Kathwada, Ahmedabad

• Type: Air Compressor Pumps
• Application: Industrial Use
• Weight: 10-20kg, 20-300kg, 30-40kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 2hp, 3hp, 5hp, 7hp
• Power Source: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year

Air-cooled canned motor pumps designed for high-temperature applications isolate liquid in the motor section of the unit for the hot process fluid in the pump casing with a series of pressure ports located in the front bearing housing or pump casing adapter. This isolated liquid (usually the same fluid as the pumped fluid) is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly.

INDO-AIR Vacuum pump has a universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. Dry type vacuum pump-only useful for handling of gases. Easy to install requiring, no foundation. Higher efficiency compared to other types or other makes of vacuum pumps. Low maintenance. Noise level under 80 DB, ideal for hospitals. While using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. Simple design makes it easy for any mechanic to dismantle and assemble the pump without any mismatch of the parts.

• Type: Air Cooled Heat Pump
• Application: Industrial
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven: Electric

Air Operated Double Diaphragm Pumps are used in facilities of all sizes, and in a variety of different industries. It is a type of positive displacement pump that uses compressed air as a power source. It is basic for ball or fold check valves to be utilized, contingent upon the solids passing necessities of the application.

• Capacity -q: Up to 300 M3/hr
• Head: Up to 150 Mlc
• Pump Size - DN: 25 mm to 300 mm
• Speed - N: 1450 / 2900 rpm at 50 Hz & 3500 rpm at 60 H
• Temperature: Up to +350 C Max
• Warranty: 1 Year

Advantages : Standard Motor Insulation & Bearings Bearing Environment at Lower Temperatures Secondary Containment Eliminates The Concern Of Fouling Caused by Poor Water Quality Bearing Wear Monitors Available

• Brand Name: TOSS
• Material: POLY PROPYLENE AND SS-316
• Power Source: AIR OPERATED
• Model Name/Number: AODD-300
• Pump Type: DIAPHRAGM TYPE PUMP
• Motor Horsepower: --
• Max Flow Rate: 135 LPM
• Head: 15 METER
• Phase: --
• Minimum Order Quantity: 10 Number

Deals in Air Operated Pump

Sujal Engineering has manufactured the heavy duty Air Cooled Pumps for high-temperature applications. It is cost effective, heat transfer pump that features a shaft mounted a fan to provide air flow over the cooling fins of the pump. In air cooled pump isolated liquid is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly. Our unique design allows the motor and bearing environment to be at a much lower temperature than the process fluid. Enabling the use of standard bearing and motor insulation significantly reducing both first and long terms operating. Air cooled pump designed by Sujal Engineering represent the highest quality and most effective air cooled industrial pump in the market. Air Cooled Pumps are used in following applications and industries: Construction Industries Plastic Industries Rubber Industries Paper and Pulp Industries Chemical Industries Petro-Chemical Industries Textile Industries Food Industries Sugar Industries Pharmaceutical Industries Salient Features:   Standard motor insulation and bearing Discharge flange is at top and radial Low maintenance Centerline supported casing Heat resistant mechanical seal

• Type: Air Operated Diaphragm Pump
• Application: Acidic Material, Barrels, High Viscous Liquid, Slurry Transfer
• Weight: 100-150kg
• Condition: New
• Driven Type: Air Operated
• Pressure: 0-10Bar
• Warranty: 1yr
• Pipe Size: 0.5Inch, 1.5Inch, 1Inch, 2Inch, 3Inch
• Automation Grade: Manual
• Flow Rating: 0-500LPM, 500-1000LPM
• Brand Name: EVA
• Material: PP, PVDF , SS , ALUMINUM

Pu3:1 Air Operated pump, corrosion protected for use with water based fluids, such as Detergents, Windshield Fluids, Water etc. Wetted components are made out of Stainless Steel Pump is designed to work in corrosive environments, ideal for use in Car Washers, Garages, Workshops, Lube Trucks, Industry etc. Reciprocating piston operated 63 mm dia. Air Motor Pumps have a built in Stainless Steel Strainer at inlet to keep contaminants away mp Only for 210 Litre Drums Delivers: Upto 14 LPM

Smit air foot pump

Air Operated Double Diaphragm Pump ( GADP) Solvents, Slurry Transfer, Barrels, Acidic Materials,High Viscous liquid, Abrasive Media Technical Data Head: up to 50 mtr. Flow: up to 45 m3 / hr Temp:up to 120 C M.O.C. :Investment Casting CFBM (SS-316),Aluminum, PP.PVDF Max. Partical Size:6.35 mm Air Pressure :Max. 7 kg/cm2 Air Inlet Size :1/4 to 1/2" Air Exhaust :3/4 to Suction Lift :Dry :4.57 meter/wet :7.6 m Teflon :Dry :3.05 m / wet : 6.09 m

• Capacity: Up to 180 M3/hr
• Speed: Up to 3500 rpm

Horizontal, single stage, suction volute type, air-cooled centrifugal pumps with closed impeller, pump shaft is supported by two heavy duty ballbearings, heat resistant mechanical seal, suction flange is on the font and axial, discharge flange is at top and radial.The below fields the pump are also proper in machinery manufacturing, food processing medicine making and the circulatution system for oil suppliyng of the hot oil boiler, the circulation system for the heating installation.Petro-chemical industries, Oil industries, Textile, dyeing, printing industries.Plastic and rubber industries.Construction Industries.

We are offering indo-air vacuum pump. Vacuum pump is an universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. dry type vacuum pump-only useful for handling of gases easy to install requiring no foundation higher efficiency compared to other types or other makes of vacuum pumps low maintenance noise level under 80 db, ideal for hospitals while using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. simple design makes it easy for any shop mechanic t o dismantle and assemble the pump without any mismatch of the parts.

Air Operated Double Diaphragm Pumps, flexible impeller pumps

Air Cooled Heat Pump, Centrifugal Chemical Pump, Rotary Gear Pump