Air Pollution Control Equipment Dealers in Kathwada, Ahmedabad

We provide a wide range of configurations to best fulfil your needs. Cage constructions typically consist of 10, 12 or 20 vertical wires. The horizontal ring spacing on the cage can be 4", 6" or 8". If plenum height restrictions are a problem, two piece cages are available. For areas where moisture or acid corrosion present we can provide a range of materials. Top load cages are available with a T-flange, ring top or several styles of rolled flange tops. Cage diameters range from 4" to 6 18". Wire thickness ranges are; 9 gauge, 10 gauge and 11 gauge. Bottom load cages are constructed with a split collar or split ring top. For more efficient cleaning, Venturi are available for all diameter cages. Venturi come in 3" to 6" lengths.

Application The Dust Extractor unit is used for controlling dust in process of Tabletting and packing. The unit strongly recommends the use of dust control equipment with all Tablet press and De-duster.   Dust laden air enters the collector through an expansion chamber, where heavy dust particles are deposited by gravity. The fine dust passes upwards through the single large orifice and is finally collected by a filter.   Features Design is cGMP – Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non-contact parts AISI 304. Easy to connect all types of Tablet press and De-Duster.

CV Series is a venturi type high efficiency wet dust collector that maintains the required environmental standards in specific areas. The extreme turbulence type venturi design ensures a very good entrapping of the dust laden exhaust gas. Large stainless steel spray nozzles provide a clog free operation and assure minimum water make up requirements. The adjustable venturi throat permits fine tuning to get optimum cleaning efficiency for the asphalt plant operating conditions.

• Type: Stainless Steel Bag Filter Housings
• Material: Stainless Steel
• Application: Filteration Use
• Weight: Depend On Size & Specification
• Color: Metallic
• Condition: New
• Finishing: Polished
• Pressure: High Pressure, Medium Pressure
• Mounting Type: Leg Supported
• Brand Name: Aquanza
• Material: SS 304, SS 316, SS 316L, Duplex SS 2205, Duplex SS 2507, CS, MS, CSRL, MSRL
• Bag MOC: PP, Naylon
• Bag Configuration: 7"X17" Or 7"X32"
• Surface Finish: Matt finish, Mirror finish, Electro Polish (Optional)
• O-ring: Silicon, FKM, EPDM, PTFE, Other on request
• Maximum Operating Pressure: 0.7 MPa (7.0 bar, 101.5 PSI)
• Maximum Operating Temperature: 65°C (149°F)
• Supported Elements: Perforated Cage, MOC: SS304/ SS316
• Inlet/outlet Connection: BSP, NPT, DIN Flange, ASA 150# Flange, BS-10 Table `D’ / `E’ / `F’ Flange , Tri-clover (1⁄2”, 3⁄4”, 1” , 11⁄2” , 2” , 21⁄2”, 3” up to 12"), SMS
• Vent Connection: NPT (1⁄2”,3⁄4”,1”), BSP(1⁄2”,3⁄4”,1”) , Tri-clover (1⁄2”, 1”)
• Drain Connection: NPT (1⁄2”,3⁄4”,1”), BSP(1⁄2”,3⁄4”,1”) , Tri-clover (1⁄2”, 1”)

• Port of Dispatch: Ahmedabad

The only quality-tested material is used for preparing the offered lot. As a result of which, we are offerings stand high on the expectations of the clients. With the assistance of our excellent logistics facility, we are able to deliver the orders within the postulated time frame. Our Air Blower has a high-strength body and is largely used for various construction purposes.            

DIESEL MACHINES For Diesel Vehical PUC Checking DIESEL SMOKEMETER (SM054) WITH OIL TEMPERATURE AND PIEZO RPM SENSOR (SIZE : 6mm DIA) *** : With this Piezo Sensor, one can check vehicles with Diesel Cars with Fuel Line 6mm dia DIESEL SMOKEMETER (SM 054) WITH ALTERNATIVE TECHNOLOGY BY UNIVERSAL RPM ADOPTER *** : With this, one can check any Diesel Cars RPM Specifications : Gas Sampling Partial Flow Measuring Light Path : 40 cm fixed   Temperature : Gas Temperature Display   Measurement Range Opacity in % 0 - 99.9% with ± 1% resolution Measurement Range K 0-9.99 with ± 0.01 resolution Measurements Oil Temp and Enginne RPM Power Requirement 220V, 50Hz

• Range of Flow Rate, (m3/hr): 15 - 22
• Dimensions (mm): 904

Strong dedication and urge of achieving perfection made Raj Group as one of the leading names of the industry engaged in the manufacturing of high quality Hydrocyclone filter. The Hydrocyclone filter is a hydraulic classification device and the Body is made out of reinforced engineering plastic which enhances the durability of the product.

Dust Collection filtration and Furnace Fume extraction systems are acquainted with catch the vapor and un smoldered particles of material which is produced amid liquefying and different procedures. The framework involves swivel hood for the furnace. Centrifugal ID fan and Bag filter are also provided as a part of the Fume Extraction system (FES).

Available with us is a quality assured range of PTFE Membrane Laminated Filter Bag. Designed to counter the disadvantages of conventional "depth filtration" media, the products we offer act as a media for the built up of a dust cake and captures more & finer particles of the dust. All our products are easy to clean and remove dust cake & then use begin for filtering application. These bags have PTFE membrane laminated on filtration side of filter media for allowing air to pass via the filter media along with trapping all particles on the surface. Further, membrane laminated filter bags are acknowledged as BACT (Best Available Control Technology) by the patrons. These bags do surface filtration by a micro porous PTFE membrane that is laminated for processing a compatible filter media. Support media of these filter bags provides the physical strength to fabric, but the filtration takes place by the membrane. This phenomenon is known as surface filtration.

• Static Pressure: 1 MM to 1200 MM
• Preferably Drive: Direct Drive, V-Belt Drive, Couple Drive.
• Operating Speed (RPM): 960 RPM, 1440 RPM & 2800 RPM
• Features: Less Noise Level, Long Sustainability.Strong,Durability.

Pulse jet bag filter - to remove heavy dust particles from the hot flue gases to control the air pollution.

Everybody wants to have clean and pollution free air around, and since industries are more responsible for Air pollution. We combat this section. There are several varieties of Bag Filter   A Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector systemconsists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust.   In reverse-pulse-jet Bag Houses, individual bags are supported by a metal cage (filter cage), which is fastened onto a cell plate at the top of the Bag Houses. Dirty gas enters from the bottom of the Bag Houses and flows from outside to inside the bags. The metal cage prevents collapse of the bag.   Bags are cleaned by a short burst of compressed air injected through a common manifold over a row of bags. The compressed air is accelerated by a venturi nozzle mounted at the Reverse-Jet Bag Houses top of the bag. Since the duration of the compressed-air burst is short (0.1s), it acts as a rapidly moving air bubble, traveling through the entire length of the bag and causing the bag surfaces to flex. This flexing of the bags breaks the dust cake, and the dislodged dust falls into a storage hopper below.   Reverse-pulse-jet Dust Collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Because of this continuous-cleaning feature, reverse-jet dust collectors are usually not compartmentalized.   The short cleaning cycle of reverse-jet collectors reduces recirculation and redeposit of dust. These collectors provide more complete cleaning and reconditioning of bags than shaker or reverse-air cleaning methods. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower.   This cleaning system works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe.

PP-FRP Blowers are mostly resistant to weathering, corrosive fumes and gases etc. they are specially designed to for laboratory Ventilation, laboratories to handle highly corrosive gases & fumes. They have been proven suitable for pickling plants and other refining processes, electroplating and pharmaceutical Chemical Industries etc. The fans are also available as per the client requirement. They are available in Direct or “V” belt driven Types.

• Size: 160x2000mm
• Material: Activated Carbon
• Color: WHITE
• Brand Name: KEL
• Bag Type: bag
• Usage/Application: Water Filter
• Medium Material: Non-Woven

filter bags can be the ideal solution for your industrial filtration application needs. they are designed to remove contaminant and debris from liquids and the dirt is caught inside the bag.  other filter technologies collect the solids on the outside of the device giving it the potential to dislodge into the filter upon removal. filter bags keep the clean side of the filter that way, clean.   the amount and size of contaminants the filter bags remove depends on their specific micron rating. rosedale has a large selection of filter media available to help solve your filtration problems. our product offerings include: ·        filter bags ·        oil removal filters ·        liquid filters ·        filter cartridges ·        perforated strainer bask

Available with us is a quality assured range of PTFE Membrane Laminated Filter Bag. Designed to counter the disadvantages of conventional "depth filtration" media, the products we offer act as a media for the built up of a dust cake and captures more & finer particles of the dust. All our products are easy to clean and remove dust cake & then use begin for filtering application. These bags have PTFE membrane laminated on filtration side of filter media for allowing air to pass via the filter media along with trapping all particles on the surface. Further, membrane laminated filter bags are acknowledged as BACT (Best Available Control Technology) by the patrons.These bags do surface filtration by a micro porous PTFE membrane that is laminated for processing a compatible filter media. Support media of these filter bags provides the physical strength to fabric, but the filtration takes place by the membrane. This phenomenon is known as surface filtration.

• Country of Origin: India
• Certification: ISO 9001:2008
• Color: Blue, White
• Voltage: 220V
• Frequency: 50Hz
• Power: 15w
• Driven Type: Electric
• Warranty: 1year
• Material: PEC STD
• Weight: 13 KG

Widely used for medium & high air suction capacity with double bag construction. Statically balanced high speed impellers give vibration free efficient suction. Model No. DC-32.in, DC-52.in, DC-72.in

• Type: Woodworking
• Brand Name: Success
• Material: Metal
• Application: Dust Collector
• Features: Low maintenance, High durability, Cost-effective
• Power Source: Electrical
• Automation Grade: Semi-Automatic
• Phase Type: Three
• Production Capacity: 300 per month

• Condition: New
• Material: Mild Steel
• Length: 2000

To fulfill the varied demands of our respected patrons, our association is occupied in providing quality approved collection of Paver Conveyor Chain.

AIR BLOWER We are into manufacturing and supplying a comprehensive assortment of Air Blower. Manufactured utilizing superior-grade raw material and other components, these products are developed under the guidance of our experts. Further, our offered range can be customized on the basis of designs as per the requirements of our clients’. Features:   High performance Trouble free service Efficient functionality Easy operation Low maintenance  

We are engaged in manufacturing and supplying excellent quality dust collector solenoid valve to our valuable clients. Offers high performance diaphragm operated pulse and pllot solenoid valves with threaded ports. Available with integral pilot or as remotely pilot valves, out let at 90?? to inlet . The pulse valves have just one moving part the diaphragm. Springless construction of diaphragm providing fast on-off operation. This high speed operation saves compressed air and provides king of shock wave necessary to free the dust from filter bags. Suitable for dust collector application, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters and sintered metal filters size range: 12" to 4" screwed operations the pulse valve is either by an integral solenoid operator or a remote pilot solenoid valve. When the pllot solenold valve is energised, the air trapped above the diaphragm is quickly exhausted

• micron rating: 200um,50,80,125
• Operate Temperature ℃: ≤130
• Thickness mm: 1.8±10%-3.5±10%
• Gram Weight g/: 500±5%-900±5%

We have segregated units for each process and to ensure that raw materials used are up to the international quality norms, our professionals carry out stern checks beforehand. We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details.