Aluminum Cap Sealing Machine Dealers in Vatva, Ahmedabad

The Vial Aluminum Cap Sealing Machine is used for sealing glass vials. These machines have been specifically used in pharmaceutical companies. The machine puts an aluminum cap on the vials for sealing them after they have been properly filled and stoppered. The vials are injectable glass vials essentially. In accordance with the required amount of output, you can easily alter the number of sealing heads. The steel frames and doors in this Aluminum Cap Sealing Machine is used for servicing the machine in the best possible manner. The turntable of the filling machine continuously feeds conveyor belt. The Aluminum Vial Cap Sealing Machine ensures placement at equal intervals. During the infeed star wheel, the vials pick up their seals before the delivery chute is approached. The free spinning sealing rollers then complete the sealing process of the Aluminum Cap Sealing Machine. cGMP model used 'No seal in chute - Machine Stop' system has been integrated 'No Stopper on vial before sealing - machine stop' system enables the machine to stop in case no stopper on a particular vial is found before the sealing can be completed A single motor is used to put all the parts into loop i.e. conveyor, platform and star wheels. Speed can be easily controlled Parts of teh machine that come into direct contact with the aluminum cap are made of Stainless Steel which fits the GMP standards also Rollers ensure that no damage is done to the caps allowing flexibility in case the neck of the vial is larger or smaller. Sealing pressure can be controlled Speed can be adjusted through drivers Counter for counting the number of vials Photo sensing device to stop the machine if the aluminum caps finish in the delivery chute If the vial is overturned or more than the allowed dimensions, the machine will stop automatically Acrylic cabinet

• Brand Name: ASHIRVAD
• Model No.: AIAACS-120 / AIAACS-240
• Machine Direction: Left to Right.
• Production Rate: 120 to 240 Vials/Minute.
• Machine Dimensions: 1828 mm (L) X 910 mm (W) X 1828 mm (H) (Approx.)
• Power Characteristics: 440 Volts, 3 Phase (4 wire system), 50 Hz.
• Motor: 2 HP.
• AC Drive: 2 HP Single Phase

Salient Features: Total cGMP model. Total contact parts are of S.S. 316, and other surface parts are of S.S. 304. Manufactured with latest technology pneumatic based machine. Automatic speed control system. No Vial No Sealing system. Elegantly matt finished body. Inbuilt protection against over current, Voltage fluctuation, Short circuit in. Standard in quality & economical in price.

• Color: STEEL
• Usage: NEW
• Product Name: Automatic Vial Aluminium Cap Sealing Machine

JDM Pharmatech is a renowned name when it comes to manufacturing premium quality products. Our range of products is best suited for industries like breweries, Pharma, distilleries, etc. If you are looking for a full-fledged aluminium cap sealing machine manufacturer, then you are at the right place.

Following are the Features Total cGMP model.MS Frame Structure duly powered coated and covered with S.S. Sheet.Machine can handle Vial Range from 2ml to 100ml and Cap size of 13mm, 20mm & 32mm (with help of Change parts).�No Cap in chute, Machine Stop� systemAcrylic Cabinet with Aluminium structure.Contact parts of S.S. 316L.Single motor synchronizes conveyor, star wheels and platform turret and speed can be varied by the % speed pot on operating panel.A special clutch device is incorporated on the in feed worm and star wheel system for stoppage of machine in the event, vial is over turned or over diameter.�No stopper on Vial, Machine stop� systems, eliminates chances of sealing of vial without rubber stopper on sealing machine.Spring loaded free spinning rollers eliminates any damage to aluminum caps and also allows greater flexibility of variation in the container neck diameter.Unique single roller imparts uniform, scratch free and reliable skirting and sealing.Sealing pressure can be varied to suit different gauges and sizes of aluminum cap.

• Net Weight: 650 kgs
• Machine Length: 1800mm
• Machine width: 1050mm
• Machine height: 1350mm

Automatic Eight Head Aluminum Cap Sealing Machine, Model: LACS – 200 is compact versatile machine. The machine is precision built on sturdy welded steel frame and doors are provided to facilitate the servicing of machine. Duly Stoppard Vials are continuously fed from the turntable of filling machine to the flat conveyor belt of sealing machine and move further through in feed worm for correct spacing and transferred to the in feed star wheel. Flip off Aluminum tear off caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with in feed star wheel, its picks up Aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit star wheel pocket and further moves out on to the flat conveyor belt.

• Filling Heads: 6 Heads
• Machine height: 1350mm

The machine is precision built on sturdy welded steel frame and doors are provided to facilitate the servicing of machine. Duly Stoppard Vials are continuously fed from the turntable of filling machine to the flat conveyor belt of sealing machine and move further through in feed worm for correct spacing and transferred to the in feed star wheel. Flip off Aluminum tear off caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with in feed star wheel, its picks up Aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit star wheel pocket and further moves out on to the flat conveyor belt.

spected years ago in this domain, the Boss Packaging Solution is affianced in manufacturing, supplying and exporting a extensive assortment of Cap Sealing Machine, Labeling Machines, Filling Machines, Capping Machines for bottles and containers. We are renowned organization in the market for offering various machineries like labeling machines, industrial labeling machine, Induction Cap Sealing Machine, Automatic Cap Sealing Machine, Capping Machine, Liquid filling machines.

• SPECIFICATION: Container Diameter 24 mm to 90 mm
• Container Height: Container Height 50 to 250 mmCap Diameter Etc

We are one of the leading manufacturers of Aluminum Vial Cap Sealing Machine specially meant for Automatic powder Injectable vial filling line. Our machines are manufactured utilizing the best materials and components along with the modern technology in accordance to the industrial standards. We offer them in different specifications and also offer them in customized versions as required by the clients. We test the quality of our products under mandatory parameters to ensure that our machines are free from any sort of defects.

Duly Stoppered vials are continuously fed from the conveyor of filling machine to the flat conveyor belt of sealing machine and move further through infeed worm for correct spacing and transferred to the infeed Star Wheel. Aluminum caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with Infeed Star Wheel picks up aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit Star Wheel pocket and further moves out on to the flat conveyor belt. Duly sealed vials are collected on out-feed collection tray.   Salient Features: Complete cGMP model. “No Stopper on Vial Before Sealing & No Seal in Chute – Machine Stop” system. Single motor synchronizes conveyor, Star Wheel and platform turret and speed can be varied by the speed pot on operating panel. Parts coming in contact with the vial / aluminum cap / exposed to the atmosphere are made out of SS. Sealing Pressure can be varied to suit different gauges and sizes of aluminum caps. Digital Counter for counting number of sealed vials. Photo sensing device stop machine automatically in the event of no aluminum cap in delivery chute. A Special clutch device is incorporated on the Infeed worm and Star Wheel system for stoppage of machine in the event, vial is over turned or over diameter. Acrylic Cabinet with Aluminum Structure & PLC with HMI for Machine. (Optional)

auto aluminum cap sealing machine, automatic bottle washing machine