Ampoule Filling Machine Dealers in Odhav, Ahmedabad

• Model No.: HFS-300V (High Speed) (Attached to Sterilizing Tunnel) On Line model
• Ampoule Sizes: 1ml to 10ml Open Mouth Glass Ampoules
• Filling Capacity: From 0.5ml to 10ml in single dose
• Filling Type: Piston Pumps Type Filling (Volumetric)
• Contact Parts: Stainless Steel AISI 316L (For Filling Nozzle & Syringe / Pump)
• Output / Minute: 80 to 280 Ampoules / Minute (Depend on ampoules sizes)
• No. of Head For Fill & Seal: Eight (Vertical)
• Require Gases For Sealing: LPG & Oxygen (Mixture)
• Nitrogen Purging: Available (Pre & Post)
• Pre Heating: Available
• Power Require: 2 H.P., 380 Volts, 3 Phase, 50 Hz (4 Wire Systems) OR 2 H.P., 220 Volts, 1 Phase, 50 Hz OR Customised
• Over All Dimensions: 2950mm (L) X 1000mm (W) X 1200mm (H)
• Net Weight: 1550 Kgs.
• Gross Weight (With Wooden Case): 1900 Kgs.

Automatic Ampoule Filling & Sealing Machine Bhagwati introducing a series of state of art technology Automatic Ampoule Filling & Sealing Machines, for performance and GMP demanding customers. The machine built on principle of Slant travel of ampoules while filling and sealing. To take care of vide variation of ampoule neck dimensions, thicknesses and ovality of available Indian ampoules. The unit built on S. S. Square pipe frame and totally encompassed with S. S. Coverings, in pleasing matt finish, Further, the large opening available at the bottom side for ease of absolute cleaning. The pendant type electrical control panel is lifted form machine for ease of operation and safety. OPERATION : The sterilized ampoule tray ran be directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers ampoules, one by one on moving eccentric ampoule rack in four or Four’s or Four’s. During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating (for Four and double head only) and final sealing I annealing is achieved. At the end to the rack, optional synchronized pusher pushes out ampoules in to tray in vertical position.   CHANGE PARTS The Basic Unit Fitted With Parts, Suitable For any One Size Of Ampoule And Any One Fill Size Syringe1 Syringes. In the event of change over of each size of ampoule, following change parts are required. Star wheel Needle set Syringe/Syringes

• Electrical Rating: 1 H.P.
• Power Characteristic :: 415 Volts, 3 Phase, 4 Wire system, 50 Cycles/Sec.
• Finish/Painted :: S.S. Finish
• Overall dimensions :: 1780 mm (L) x 1350 mm (W) x 1270 mm (H)
• Net Weight :: 900 kgs. Approx.
• Output/hour :: 7200 Ampoules

We offer our clients with ampoules Filling and Sealing Machine that is fabricated as per the industrial standards. ampoules Filling and Sealing Machine are available with in-built safety features for long term reliable operation. Further, ampoules Filling and Sealing Machine are also provided in customized specifications to meet the varied needs of the clients. Our range includes the following:- We are instrumental in offering automatic six head ampoule filling and sealing machine, model � ahfs-6. These are highly appreciated by our clients for the sealing pre mechanism and for the feature of no ampoules no filling. We offer precision engineered automatic four head ampoule filling & sealing machine, model ahfs � 4. automatic four head ampoule filling & sealing machines are manufactured using high quality components and are offered in customized solutions as per the needs of the clients. Further, automatic four head ampoule filling & sealing machine are available with a. C. Frequency drive that provides speed control for digital counter. In addition, we offer these with the pre sealing mechanism, which does not require ampoules or filling.

• Model: AFS-30
• No. of Head: Single
• Ampoule Handling Range: 1 ml to 20 ml
• Production Output: Up to 30 ampoules/minute
• Filling Accuracy: ± 1%
• Require Gas for Sealing: LPG & Oxygen (O₂)
• Nitrogen Flushing: Pre & Post Nitrogen Flushing Available
• Power Specification: 0.5 H.P.
• Electrical Characteristics: 230 Volts, Single Phase, 50 Hertz, 4 Wire System
• Contact Parts: Made from Stainless Steel 316
• Non Contact Parts: Made from Stainless Steel 304
• Overall Dimension: 915mm (L) x 610mm (W) x 965mm (H)

• Voltage: 230 volts
• Warranty: 1 year manufacturing warranty
• Brand Name: Adinath
• Supply Ability: 10 Unit/Units per Month
• Packaging Details: Product & transport worthy packing
• Power(W): 0.5 H. P. - 2 H. P.
• Dimension(L*W*H): 960x765x650 - 2350x950x1500 in mm
• Place of Origin: Gujarat, India
• Port: Ahmedabad/Nhava Sheva
• Model Number: AFS-30

Offers two head ampoule filling machine, two head ampoule sealing machine, ampoule filler sealer, single head ampoule filling machine, four head ampoule filling machine, six head ampoule filling machine, eight head ampoule filling machine, Ampoule Vial Jet Washing Machine, Ampoule Labeling Machine, Ampoule Inspection Machine by manufacturer and exporter of ampoule filling & sealing machine in Ahmedabad, India, Adinath International.

We are offering ampoule filling machine, ampoule labelling machine. Salient features compact cgmp model. Ampoule gas centering during gas flushing and filling. Possibility of gas flushing before, during and after filling. Aisi 316l dosing syringes. “no ampoule - no filling function” fast change over due to extremely limited parts to be replaced. Possibility to memorize various parameters of different ampoule sizes. Extremely robust, high engineered. Machine equipped with pre-warming station. Minimum change over time, little maintenance, easy cleaning. Technical specification production rate : 15 to 30 ampoules per minute input specification : container dia.: 10mm to 21.5mm container height: 60mm to 140mm power specification : 1 h.p., 3 phase, 4 wire system, 50 hertz. Filling range : 1 ml to 20 ml filling accuracy : ± 1% from filling volume utility : nitrogen pressure: 1kg/cm2 oxygen pressure required: 1kg/cm2 lpg pressure required: 0.5 kg/cm2 gas for sealing : oxygen + lpg optional accessories : programmable logic control (system) with mmi aluminum profile cabinet covering full machine power specification : 1.5 h.p., 3 phase, 4 wire system, 50 hz. Overall dimension : 915mm (l) x 610mm (w) x 965mm (h) note: electrical characteristics can be adjusted as per customer’s domestic power requirements.

Automatic Tube Filling machine, label code printing machine, batch

Ampoule Filling Sealing Machine, ampoule labeling machine

Automatic Six Head Ampoule Filling and Sealing Machine MODEL: AHFS 6 We are instrumental in offering Six Head Ampoule Filling And Sealing Machines. These ampoule filling machines are highly appreciated by our clients for the sealing pre mechanism and for the feature of no ampoules no filling. Specifications: • Electrical rating: 1 h. P. • Power characteristic: 415 volts, 3 phase, 4 wire system, 50 cycles/sec • Finish/painted: S. S. Finish • Dimensions: 1780 mm (l) x 1350 mm (w) x 1270 mm (h) • Net weight: 900 kg approx. • Output/hour: 7200 ampoules • Ampoules size: 1ml to 10ml • Optional accessories: A. C. Frequency drive for speed control digital counter   The machine built on principle of Slant travel of ampoules while filling and sealing. to take care of wide variation of ampoule neck dimensions, thicknesses and ovality of available in global ampoules. Operation: • The sterilized ampoule tray can be directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers ampoules, one by one on moving eccentric ampoule rack. • During the stoppage of rack pre-gassing, filling, post gassing, pre heating and final sealing is done.

We offer precision engineered Automatic Four Head Ampoule Filling And Sealing Machine. These ampoule filling machines are manufactured using high quality components and are offered in customized solutions as per the needs of the clients. Further, these are available with A. C. Frequency drive that provides speed control for digital counter. In addition, we offer these with the pre sealing mechanism, which does not require ampoules or filling. The machine built on principle of Slant travel of ampoules while filling and sealing. to take care of wide variation of ampoule neck dimensions, thicknesses and ovality of available in globe ampoules.

Lug Capping Machine, Ampoule packing machine, Visual Inspection Table

We are offering automatic six head ampoule filling machine. Electrical rating : 1 h.p. Power characteristic : 415 volts, 3 phase, 4 wire system, 50 cyclessec. Finishpainted : s.s. Finish overall dimensions : 1780 mm (l) x 1350 mm (w) x 1270 mm (h) net weight : 900 kgs. Approx. Outputhour : 7200 ampoules

Ampoule Vail Filling Machine, Ampoule Vial Washing Machine

Pharmaceutical Machinery

pharmaceutical machinery parts, ampoule labeling machine, Packaging Machines