Angular Contact Ball Bearings Dealers in Ahmedabad

Suitable for: High accuracy and high-speed application Accommodating combined load i.e. axial and radial load High load carrying capacity Quiet and low friction ZNL Offerings: Single row angular contact ball bearing: 7000, 7200, 7300, 7400 (Available in Steel, Brass & Polyamide Cages) Double row angular contact ball bearing 3200, 3300, 5200, 5300

• Bearing Number: 3200-3315
• Bore Size: 14.3 mm
• Number Of Rows: 2
• Outer Diameter: 30 mm
• Inner Diameter: 10 mm
• Dynamic Load: 8 kN
• Static Load: 5.79 kN
• Mass: 0.052 kg

An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, dentistry equipment, the centrifugal forces generated by the balls will change the contact angle at the inner and outer race. Ceramics such as silicon nitride are now regularly used in such applications due to its low density (40% of steel - and so significantly reduced centrifugal force), its ability to function in high temperature environments, and the fact that it tends to wear in a similar way to bearing steel (rather than cracking or shattering like glass or porcelain).   Most bicycles use angular-contact bearings in the headsets because the forces on these bearings are in both the radial and axial direction .

Wheel bearing are one of the most crucial components of a car's suspension. They are usually located in the hub (the part that the brakes and wheels are attached to) or even the brake drum or rotor itself. Wheel bearings allow the wheel to rotate freely as the car travels down the road. Most cars have an inner and an outer bearing on each wheel.A wheel bearing is a simple device made up of two main components, the bearing itself and the race. The bearing itself consists of a metal housing that is pressed over a row of ball bearings that circle the metal housing. These ball bearings in turn ride on the race, which is a very smooth metal surface. When a wheel is rolling, the action of the ball bearings rolling against the surface of the hub that allows the wheel to spin smoothly

• Weight: 1 TO 10 KG
• Material: Mild Steel, Stainless Steel
• Shape: ROUND
• Outside Diameter: 99.99 - 100 mm
• Bore Size: 64.99 - 65 mm
• Type of Bearing: ANGULAR BALL BEARING
• Dimension: 12 MM TO 200 MM
• Usage/Application: INDUSTRIES MACHINE, Textile Machine
• Brand: SRE
• Packaging Details: AS PER REQUIREMENT

Empowered by five years of experience in this domain, we are betrothed to manufacturer, distributor and trader Angular Contact Ball Bearings. The offered bearing in automobiles and machinery, the offered bearings are used to support the radial and axial high speed motion. The manufacturers that require such bearings are automotive products, precision machinery and parts. In order to manufacture the offered bearings, our adept use exceptional quality steel and metal alloys and advanced techniques. Features: Precision engineered Sturdiness High tensile strength Perfect finish Specifications: Precision engineered High Quality Steel – Ultra clean steel to extend bearing life by up to 80%. Advanced Grease Technology – NSK lubricants that can extend grease life and performance. High Grade Balls – Quiet and smooth operation even at high speed. Super Finished Raceways – Specially honed to minimise noise and improve lubricant distribution and life. Contact Angle – Offered in 15, 25, 30 and 40 degree angles. Cages – Available in a range of Polyamide, steel and brass cage assemblies.

An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race

We are engaged in providing an extensive array of Angular Contact Ball Bearings. These bearings are updated with raceways in the inner and outer rings that, in the direction of the bearing axis, are displaced with respect to each other. Combined loads lodged by these bearings are simultaneously acting radial and axial loads. FeaturesHigh tensile strengthExcellent finishDurable

• Material: SS
• Shape: Round
• Size: 1/2 to 3 Inch
• Shape: Round
• Usage/Application: Automotive Industry
• Brand: SKF
• Surface Finishing: Polished
• Customized: No

• Brand Name: IBC
• Material: Bearing Steel
• Usage/Application: Machinery
• Type of Bearing: As per customer's specifications, drawing or sample
• Dimension: As per customer's
• sizes: 100 MM to 1000 MM

The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. NSK offers one of the most comprehensive ranges of angular contact ball bearings available. Features High-Quality Steel – Ultra clean steel to extend bearing life by up to 80%. Advanced Grease Technology – NSK lubricants that can extend grease life and performance. High-Grade Balls – Quiet and smooth operation even at high speed. Super Finished Raceways – Specially honed to minimise noise and improve lubricant distribution and life. Contact Angle – Offered in 15, 25, 30 and 40-degree angles. Cages – Available in a range of Polyamide, steel and brass cage assemblies

• Bearing Number: 3310 Bearing
• Material: Chrome Steel
• Usage/Application: Machinery
• Number Of Rows: Double Row
• Type of Bearing: Angular contact ball bearings

Angular contact bearings are typically assembled with a thrust load or preload. The preload creates a contact angle between the inner race, the ball and the outer race. The preload can be done while manufacturing the bearing or it can be done when the bearing is inserted into an application.

• Bore Size: 25mm
• Material: Stainless Steel
• Precision Rating: P0 P6 P5 P4
• Grade: 316
• Structure: Angular Contact
• Finish: Polished

• Bore Size: 0.5 - 150 mm
• Type: Ball
• Number of Row: SINGLE AND DOUBLE ROW
• Brand Name: CNZ
• Country of Origin: Gujarat,India
• Structure: Deep Groove
• Precision Rating: Z3
• Best: CNZ Stainless Steel Bearings
• Seals Type: Yes
• Supply Ability: 10 Milliohm/Milliohms per Year 10 Million Per Year
• cnz: carbon steel insert bearings

Angular contact bearings are designed such that there is an angle between the races and the balls when the bearing is in operation. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings are typically assembled with a thrust load or preload. The preload creates a contact angle between the inner race, the ball and the outer race. The preload can be done while manufacturing the bearing or it can be done when the bearing is inserted into an application.

• Material: Chrome Steel
• Country of Origin: Made in India
• Usage/Application: Machinery
• Number Of Rows: Single Row
• Warranty: 1 Year
• Packaging Type: Box

• Features: Precisely engineered, Durability, Accurate dimension

Angular Contact Ball Bearings are usually used as a combination or two or more bearings. Available in three types of combinations including DB, BACK TO BACK – DF, FACE TO FACE and DT, TANDEM. These angular contact ball bearings are used for applications including machine tool spindles and usually are preloaded. Application Ball screw support bearings Machine tool spindle Pump application with deep groove ball bearing Pinion type reducer