Hospital Autoclave & Sterilizers Dealers in Ellisbridge, Ahmedabad

• Condition: New
• Warranty: 1 Year
• Material: Mild Steel
• Brand Name: Sterimac India
• Performance: Superior
• Feature: Robust construction, Durable finish standards

We are dealing in best Instant Electric Water Heater.

• Power: 1800
• Voltage (VHZ): 220/50
• Capacity L: 18
• Chamber mm: 247 x 350
• Outer Size mm: 480 x 590 x 405
• Net Weight kg: 45

B Standard win 3 time pre vaccuum preceding vacuum drying 105 C Rubber and Plastic disinfection prgoram Sterlization temperature : 121 C or 134 C Unique solution for cotton sterllization cycle Special Sterlilzation program: HIC, HBV, BSV, Liquid Cycle It is installed with Bowic & Pick Measure Sterilization and drying time adjustable help you to get the best Sterilization effect With open water tank easy to clean LCD Display you can observer the working cycle easily and cleaning Mini Printer is available which can be attached to record the process of sterlization Automatic malfunction deecting system

• Type: Water Heaters
• Usage: Boiling Water
• Color: Blue, Brown, Green, Grey, Light White
• Voltage: 110V, 220V
• Condition: New
• Operating Type: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year
• Energy source: Electric

We are the main supplier of this product.

• Usage: Cement Testing Machine
• Power: Electronic
• Port: Gujarat, India
• Model Number: TM 26

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime   This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

Industrial immersion heater are used for boiler vessels , water bath , antiglare dishwasher, kettle humidifiers , steam tables , hotel /hospital canteen , circulating water tanks etc

• Model Number: EIE

We are offering Salient Features · Double wall design · Single chamber for steam and water · Working chamber made of stainless steel LM - 304 grade having 2mm thickness. · Exterior Body is made of Mild steel LM, which is powder coated in attractive shades. · Lid, flange & bottom sheet also made of stainless steel. All joints argon welded. · Joint less silicon gasket · Heavy duty industrial flange heater. · Microprocessor based Digital Temperature Indicator cum Controller. · PID Controller Controls temperaturepressure precisely at set value. · Temperature Sensor : PT - 100 · Pressure range : 15 to 22 PSI, factory set at 15 PSI · Temperature Range : 121°C to 125 °C · Temperature Resolution : 0.1 °C · Temperature Accuracy : ± 0.5 °C · Working chamber size : 30 cm diameter x 50 cm height · Volume : 35 liters, rating 2 KW · Operates on : 230 Volt, 15 Amp, 50 Hz, Single Phase, AC Supply · In built digital timer; timer can be adjusted as per sterilization load requirement. · Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve. · Complete unit is Hydraulically tested at 60 PSI pressure. · Supplied with Calibration certificate with traceability · Complete with S.S. Perforated basket

Introducing a new electrical autoclave, with well equipped in infrastructure and team of experienced workers, we have been capable to serve our clients by offering high quality industrial autoclaves, absolutely in tune with their requirements. Use of premium grade material and state-of-the-art technology provide our products an incomparable identity. Our range of robustly constructed industrial autoclave is widely used in medical, pharmaceutical and agriculture industry. Our range consists of vertical autoclave, laboratory autoclave, medical autoclave, pharmaceutical autoclaves, sterilizer pressure cooker, high pressure sterilizer, laboratory sterilizer etc.Technical data:Ÿ Double walled construction outer M.SS.S. 304 & InnerŸ Lid made of S.S 304 heavy gauge die pressed, with handle, and tightening deviceŸ Equipped with pressure gauge, steam release valve & 2 Safety valveso o Ÿ Working Temperature: Ambient to 135 C, Accuracy: +-0.5 at 121 CŸ Controller: Microprocessor PID Multifunction controller (Adjustable)Ÿ Timer: Up to 12 hours2 o Ÿ Work pressure: 2.0KG cm at 132 C Gauge: 0-4Kg cm2Ÿ This instrument is supplied with S. S. perforated basketŸ Fitted with silicon rubber gasket joint lessŸ Power required is 230 Volts 50 Hz• Foot lifting arrangement to open lid

Bonzer Flat and Gusseted Reel is made with Medical Grade Paper and Transparent MultiLayer PET/PP Copolymer Film. The Inks used are water based. It is used for ETO and Steam Sterilization. 

We are one of the reputed Suppliers and Exporters of Sterilization Gusseted Reel. Procured from the top manufacturers of the industry, our Sterilization Gusseted Reel is used for sterilizing bulking items. Our Sterilization Gusseted Reel can also be obtained with label printing upon client request. Features : Manufactured with high quality 70 GSM Medical Grade PaperSealed with Multilayered 56 GSM Laminated Cast Poly Proplene (MLCPP)Extra spaciousAvailable with Chemical Indicators of Steam and EtO Available in different sizes like : 7.50 Cms10 Cms15 Cms20 Cms25.00 Cms30.00 Cms35.00 CmsAlso available in the length of 100 Meters

• Type: Hospital Sterilizers
• Voltage: 110V, 220V, 240V, 380V
• Application: Medical Use, Steam Generation
• Capacity: 0-100ltr, 100-200ltr, 200-300ltr, 300-400ltr, 400-500ltr, 500-600ltr
• Frequency: 50Hz, 60Hz
• Power: 1kw, 2kw, 3kw
• Feature: Durable, Easy To Operate, High Performance, Kill Bacteria, Rust Resistant
• Warranty: 1yrs, 3yrs
• Automation Grade: Fully Automatic, Manual, Semi Automatic

• Material: WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Inlet Size: 1" x 2" through 10" x 12" ANSI Flanged
• Inlet Rating: ANSI Class 150# to 2500#
• Orifice Size: Sizes D Through T
• Temperature Range: -450º F to 1500º F
• Pressure: 5 to 6500 PSIG

Spring loaded safety relief valve Full lift pop type design Open bonnet with cap & liver Close bonnet with liver Close bonnet with cap Close bonnet with packed liver Metal seat Stallited nozzle & dics Soft seat with PTFE & Viton Bellows seal safety relief valve

Sensus Metering Systems safety relief valves offer an economical installation for large large relieving capacity applications such as gas distribution systems, metering sets, and industrial applications. The Model 250-S and 250-DW are angled body safety relief valve with a large exit area for a high flow rate. They incorporate a deep molded diaphragm that provides maximum lift while not affecting initial relief.   The Model 257-S features the same "roll-out" diaphragm principle with a double ported single valve that has achieved such remarkable success in the widely used 441-57S and 461-57S regulators. The roll-out diaphragm is a combination of strength and flexibility in which diaphragm action is constantly matched with spring action. This design offers large capacity, tight seat and reseat, sturdy construction, no adjustments, and easy servicing

Girish Electrical Industries manufactures 'Girish Heat' brand alkali immersion heaters. These are made of chrome nickel sheathed heating element brazed to CI junction box for mounting on side of the vessel. 

• Brand Name: Aeroflon Engineers Private Limited
• Application: Industrial
• Compressor Type: Screw Compressor
• Diameter: 2mm
• Grade: 304
• Packaging Type: Box

AMTECH manufacture angle type safety valve threaded or flange type in various materials for wafet/ air/ compressure/ vacuum system , and any other specific field for customer requirements. Angle Pattern, Enclosed Discharge, Screwed Male Threads at Inlet and Screwed Female Ends at Outlet to BS 21 OR bsp-MxF ,npt-M x F design as well as flanged end design. We are providing soft seated and metal seated valves. The soft seat from rubber- viton /silicon / Teflon seated. We also prove Hard face in seat material like stellited ST6.   Specification

• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting,INDUSTRIAL
• Pressure: High
• Feature: Casting Approved
• Warranty: 1 Year
• Structure: Safety

We are offering Safety Relief Valves Conventional ,High & low Pressure Threaded with close & open Bonnet and with cap or lever, Pilot Operated safety relief valve

• Working Temperature: 121 deg.C
• Working Pressure: 1.26 Kgf/cm2 (15 psi
• Hydro Test Pressure: 2.5 Kgf/cm2 (35 psi)

Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply. Mode of Heating Electrically heated by special flange type / immersion type heaters bearing ISI mark, to work on single / three phase, 220/240 volts, 50Hz, A.C. supply. Working Pressure The pressure inside the chamber is variable from 5 psi to 20 psi. But the normal recommended pressure for sterilization process is 1.2 Kgf/cm2 (15 psi). Optional Accessories Semi Automatic Pressure Control Switch. Automatic Low Water Cut Off Device Mechanical Timer (0-60 Min) Mechanical Timer With Alarm System Solid State Digital Timer (0-120 Mins) Solid State Digital Temperature Indicator. Micro-Processor Based Programmable Timer Controller. Micro-Processor Based Programmable Timer (0-120) Circular Temperature Chart Recorder (24 Hours/Seven Days) Strip Chart Recorder Digital Pressure Transducer Cum Indicator Automatic Pressure And Temperature Mapping System With Validation Soft Ware (Without Pc) Spare Heaters (In-house custom Developed SS Heaters) 2 KW3 KW4 KW

Enables filtration, pre-heating, dearation, and precise dosing of media in the vessel within the dissolution bath, 21 litre media tank capacity allows filling of dissolution vessels for upto 3 dissolution tests (n=6), Batch degassing ensures inter-vessel degassing consistency Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. requirement, Special nozzle design allows the handling of surfactant and frothing media like Sodium Lauryl Sulphate (SLS), Programmable deaeration time, temperature and vacuum for effective deaeration of different media, Maintains media under vacuum at desired temperature while in idle condition, Virtually zero dead volume minimizes wastage of media, Programmable dispensing volumes from 200 ml to 4 ltrs, Fast filling of dissolution vessels at a dispensing rate of 900 ml min, Programmable rinse and cleaning cycle allows the instrument to run through a prevalidated self cleaning procedure, On- board memory stores 10 batch information of degassed media, Unparalleled versatility due to 1 ml volume change increments, 360 turning radius allows it to be maneuvered in tight places, Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy media tanks, Ergonomically designed nozzle with embedded dispense switch for ease of operation, User friendly validation and calibration of media volumes.

• Condition: New
• Temperature: 100 - 300 Degree C
• Insulation Wall: Single Wall
• Automation Grade: Automatic

Water Heater, Air Coolers

motorized safety control valves, Control Equipments, Flame Detectors

We deals in supplying of wide range of Safety valve.

Eto Sterilizer

Ball Valve, Industrial Valve

Precision Components, Precision Engineering Parts, pneumatic systems

Water Heater, home appliances-mixer, Grinder, industrial electric ovens

Water Heater

laboratory instrument, scientific instrument

Water Heater, modular switch, Home Appliances, House Wire, mcb switchgears