Automatic Filling Machine Dealers in Amraiwadi, Ahmedabad

• Approx Price: Rs 85,000 / Piece
• Machine Type: Semi-Automatic

Supported by a well-organized network and dependable resources, we have developed as a reputed supplier of Semi Automatic Liquid Filling Machine. We are one of the respected names in the market of Ahmedabad(India) and are offering amazing deals on our products.   Salient features : S.S. Elegantly matt finished body. Simple Design. Easy to operate. Low Power Consumption & Maintenance Free. Highly Accurate Range - 5ml. to 1000ml. Speed -300 to 1500 containers / Hour depending on volume / viscosity of the liquid to be filled. Packing Material - Bottles, Jars & Pouches Rigid vibration free construction for trouble free performance

•  :  
• Cup Feeder: Manual / Automatic (optional)
• Cup Size: As Per Final Glass Sample Or 75mm
• Filling Range: 100ml - 300ml (volumetric Piston Filler)
• Foil Cutting System: Lip Type
• Filling System: Gravimetric (digital Timer Base)
• Balance Tank: 40 Ltr. with float valve
• Laminated Roll: 205mm. (Width) Photocell Mark 95 to 100mm
• Dimension: (LxBxH) 7 ft x 3 ft x7 ft (With Tank)
• Machine Weight: 450 kg. (Appro x.)
• Power Consumption: Motor : ½ HP Single Phase
•  : Pick Load : 2.5 KW (heater load)
• Output: 20-24 glass Per Minute (200ml-300ml)

Our Liquid Packing Machine is manufactured using high grade stainless steel, well known for its noiseless operation and negligible maintenance. Moreover, we provide customization as per the specific requirement of the clients inorder to meet their needs. We are also counted as the best exporter of Pouch Packaging Machine in India

• Capacity: 1000-2000 pouch per hour
• Driven Type: Electric
• Automation Grade: Fully Automatic
• Application: Industrial
• Appox Weight: 300kg
• Minimum Order Quantity: 1 Unit

SBAF-D-100 Automatic Double Head Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.   The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor from magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.    

• Type: Powder Packaging Machine
• Certification: ISO 9001:2008
• Color: MATT
• Voltage: 220V
• Condition: New
• Function: Packing
• Automatic Grade: Automatic, Semi Automatic
• Power: 3-5kw
• Packaging Type: Bags, Bottles, Cans
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Weight: 100-1000kg, 1000-2000kg
• Country of Origin: India

• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 9-12kw
• Warranty: 1year
• Weight: 2000-3000kg
• Application: Liquid Filling
• Fill Product: Syrup, Agriculture Medicine, Pesticide Medicine, Hair Oil and Shampoo, Edible Oil, Lubricant Oil etc.
• Fill Capacity: 2 ml to 10ml, 5ml to 50ml, 5ml to 100ml, 30ml to 250ml, 50ml to 500ml, 100ml to 1000ml

• Voltage: 230 V
• Capacity: 3-6 Bags/Min
• Machine Type: Automatic
•  :  
• Frequency: 50 Hz
• Power Source: Electric
• Phase: Single Phase

• Country of Origin: Made in India
• Driven Type: Electric, Mechanical
• Filling Range: 50ML TO 1000ML. WITH THE HELP OF CHANGE PARTS
• Capacity: 30-40 BPM
• Brand: Deepuj
• Filling Speed: 30-40 BPM
• Filling Head: 4

• Warranty: 1 Year
• Condition: New
• Certification: ISO9001 2015
• Voltage: 380V
• Dimension(L*W*H): 1000*650*1550mm
• Port: Ahmedabad / Nhava Sheva
• Weight: 300kg
• Packaging Details: Product & transport worthy packing
• Processing Types: Glass Bottle
• Lead Time: 4 Weeks / more
• Processing: Washer

• Type: Automatic Volumetric Liquid Filling Machine
• Application: Industrial Use
• Weight: 100-500kg
• Voltage: 110V
• Power: 1-3kw
• Driven Type: Electric
• Automation Grade: Automatic

Manufacturer & exporter of Automatic Liquid Filling Machine & Automatic Electronic Filling Machine. Our product range also comprises of Semi Automatic Liquid Filling Machine and Volumetric Liquid Filling Machine. Gained prominence in the industry as a reliable organization, we are engaged in providing Automatic Liquid Filling Machine. Widely demanded in food processing, beverages and dairy industries, our offered filling machines are provided in various specifications. These machines are delivered timely to gain maximum client-satisfaction.

• Overall Dimension: 1500mm (L) x 1200mm (W) x 1600mm (H)
• Power Supply: 2.25 H.P.

Semi-automatic Capsule Filling Machine gives output of 25,000 to 30,000 capsules per hour and suitable for filling capsules of all sizes with powder, pellets & granules. It is comparable to the best because of its outstanding mechanical & functional features. This innovative design & precision manufacturing meets the requirements of cGMP. Machine is most ideal choice in Semi Automatic Capsule Filling Machine available in the market.

• Condition: New
• After-Sales Service Provided: Engineers available to service machinery overseas
• Driven Type: Electric
• Packaging Type: Bags, Barrel, Bottles, Cans, Capsule, Cartons, Case, Pouch, Stand-up Pouch
• Certification: CE Certified Company, CE Certified Company
• Service: 24/7 Technical Support
• Port: India
• Application: Apparel, Beverage, Chemical, Machinery & Hardware, Medical, Textiles
• Place of Origin: Gujarat, India
• Model Number: SBVF - 150
• Business Type: Manufacturer
• Packaging Details: Depends on Clients Requirements.

• Model: e.fill - 2H
• Output/ Hour (Base on 5 Liter): 350 Cans Hour
• Direction of Movement: Left to Right
• No. of Filling Head: 2
• Fill Size: 5 to 15 Liters
• Electrical Specificationt: 2 HP / 415 / 3ph / 50 Hz.

The automatic electronic liquid filling machine is compact and highly efficient machine with elegant look. This multi function multi featured machine meets the custom requirements of filling for glass, plastic and aluminum bottles. The machine has its own pumping system to connect the machine with main tank. The flow of liquid is measured and converted in to electronic signals being controlled by micro computer base circuitry. Minimum adjustment required to set different capacities from 5 liters to 15 liters with varying containers. The entire range can be set on the same machine without any change parts.

Output 80 – 100 vials / minute suitable for 5 ml to 30 ml vials depending upon volume and viscosity of liquid fitted with part suitable for any one size of vial & stopper size.   Features M. S Structure & SS. – 304 Cladding. For frame and top plate. Individual gear box for each unit. No belt drive. Separate A. C. Frequency drive speed control. NO stopper no vial machine stop system. Automatic rubber stopering and Aluminum cap by vibratory.

AUTOMATIC LIQUID BOTTLE FILLING AND ROPP CAP SEALING MACHINE MODEL: AHBF 4 Salient Features: • “No Bottle - No Fill" system. • All contact parts made of SS316 material with Autoclaving/Sterilization/Cleaning. • FMachine construction in SS 304 material. • Diving Nozzle for Foam free filling. • With Fill Accuracy. • Automatic In-feed and Exit of Bottles. • Minimum Change Over time. • Digital counter. • Built-in A.C. Variable Frequency Drive System. Process Operation: Bottles are feed on to in-built Infeed turn table, from where it delivered to SS conveyor belt. Conveyor belt transport bottles to filling station. Filling station has mechanical bottle stopper for exact bottle neck centering of bottles during filling operation. Nozzle goes upwards slowly from the bottom level of bottle towards neck during filling to minimize forming adjustable nozzle is reciprocating according to filling dose. The dosing block with a hexagonal bolt, this means different fill size can be set easily within minimum use of time. After liquid filling bottles are delivered to capping/labeling machine conveyor for further operations.

The sterilized ampoule tray can be directly loaded in to slant hopper of the unit. The synchronized star wheel Delivers ampoules, one by one on moving eccentric ampoule rack in single or two's or four's. During the stoppage of rack sequentially pre-gassing Filling, post gassing, pre heating (for single and double head only) and final Sealing/annealing is achieved. At the end to the rack, optional synchronized pusher Pushes out ampoules in to tray in vertical position. The basic unit fitted with parts suitable for any size of Ampoule and any one fill size syringes. In the event of change over of each size of Ampoule, following change parts are required. The filling system includes filling syringes, made from stainless steel, pre & post gassing arrangements as well as mechanical "No Ampoule, No Filling" device. Filling is affected by aspirating filling product through the syringes, passing it by positive displacement through the non return valves, filling tubes and filling needles in to the ampoules. Fine setting of each filing syringe is possible. The machine is suitable for filling range from 1 ml to 20 ml. "No ampoule, No filling" system is advantageous to save the costly filling liquid. The sealing station is composed of the ampoule revolving station, sealing burners as well as draw-off jaws. The regulations of burner flames are made easier with the knob. The machine can be easily inspected and better accessed from the both the sides. The driving and controlling elements are protected from splinters, product spillage and jets of water. All the parts coming in contact with the filling liquid are made out of stainless steel 316 and can easily be cleaned and sterilized. The ampoules which are to be treated are fed from ampoule sterilization boxes to an inclined charging hopper. Alternatively, customer can make arrangement for feeding the ampoules directly from sterilized tunnel. Through the charging hopper the ampoules are passed in to ampoule feeding Wheel, which in turn transfers the ampoules positively to the ampoule carrying rack. Ampoules at a time are transported to the various processing stations. The ampoule carrying rack carries the ampoules at an angle of 52 degrees to the vertical, stroke wise. Two centering racks lift the ampoules from behind out of ampoule carrying rack for inert gas treatment and filling and sealing operation. The precision transport system ensures exact centering of ampoule necks at each working station. At the filling station, ampoules are filled accurately, at a time depending on no. of syringes. Filling is affected by aspirating filling product through the syringes, passing it by positive displacement through the non return valves, filling tubes and filling needles, in to the ampoules. Filling in the stationery position and exact centering of necks at the filling and gassing stations guarantees filling without moistening ampoules necks and uniform, safe closures. The sealing station is composed of the ampoule revolving station, burner station as well as draw off jaws. In the ampoule revolving station, the ampoules are rotated round its longitudinal axis. At sealing station, the ampoule necks are gripped by the draw off jaws and sealed when adequate plasticity of glass has been reached, the glass splinters are collected in the waste box.

• Shot off Nozzle SUS316L: 2 head to 24 head
• Range of filling volume: 50-1000ml
• Power consumption: 3.5KW

Gear pump filling equipment is exclusively designed to fill different types of liquid such as diesel oil, crude oil, lube oil, cacao butter, vegetable fats, animal food, acid, soap, and many more products. It is perfect filling machine applicable in wide range of industries which has requisites for filling liquid products.

EEWA produces pneumatically operated semi-automatic Plastics Tube Filling, Sealing, batch Coding, Trimming Machine. Major brand confidence in EEWAhas enabled the company to become one of the world’s leading manufacturer of Filling and Sealing Machines for Pharmaceutical and Cosmetic Products in Plastic Tubes. To gain that rank and recognition in the world of pharmaceutical and cosmetic goods, in the demanding world of quality, the company has based its development on building up a relationship of trust with its customers. SALIENT FEATURES Electrically operated pneumatically controlled semi-automatic operation Hot air type sealing system 10 / 12 cups station Output up to 30 cycles per minute Intermittent motion, single station rotary table layout Precision cam controlled operation Precise control of fill volume No tube/ no fill Manual tube loading Automatic ejection of filled tube sealed end first One set of size parts with PVC tube holders Stainless steel product hopper Welded tubular steel frame base, machine painted in “steel-it” stainless steel paint Lifting of the tube under the nozzle for bottom up filling Modular design allows for easy access to all components Sealed tube testing equipment for testing sealing strength of sealed tube

SALIENT FEATURES + 1% Filling Accuracy on single dose. Rigid vibration free construction for trouble free performance. S.S elegantly matt finished body. Elegant and easy control panel for total control on operation. Minimum charge overtime, from one size to another container or fill size. Automatic washing of conveyor belt[ optional. No container No filling system – to avoid spillage. Pneumatic control bottle stopper. cGMP Model.

Electrical rating : 0.5 hp power characteristic : 415 volts, 3 phase, 4 wire system, 50 cyclessec. Finishpainted : s.s. Finish overall dimensions : 800mm x 700mmw x 1000mm h net weight : 300 kgs. Outputhour : 1500 to 2000 objects

Automatic Rotary Bottle Filling Machine, Ozone Water Treatment Plants

automatic auger filling machine, Label Coding Machine

Semi Automatic Auger Filling Machine, Single Rotary Tablet Press Machine

Automatic Liquid Filling Machine, Bottle Washing Machine

Sealing Machine, Capping Machine, Jar Capping Machine

Fully Automatic Syringe Filling Machine

Semi Automatic Horizontal Tube Filling Machine, Detergent Band Sealer