Automotive Components Dealers in Sardar Patel Ring Road, Ahmedabad

• Tonnage: 20 t – 400t
• Length: 1500 mm – 4000 mm
• Thickness: 1.6 mm –20 mm

SALIENT DESIGN FEATURES   Mono block of welded steel frame of ultra tested 2062 steel plates rigid to provide accurate bending. All pivots are hardened of ground pin bushes of lubricated by a central hand pump. Repetitive accuracy is within ± 0.03 mm ram travel parallelism without using sensitive and complex servo hydraulics. Most reliable hydraulic components and sealings of international reputed design for 350 bar against operating pressure of 160 bar maximum. Three cycles of operation inch, single cycle and auto for greater operator convenience. Movable operator console is provided with switches for cycle selection, ram up-down travel, emergency stop and motor on / off. Front operated manual back gauge. Electrical panels and components are provided as per international reputed brands. Precisely panels and manufactured cylinders provide unlimited trouble free working life. Seals can be changed quickly without dismantling the ram or need of crane. STANDARD FEATURE ACCESSORIES   Main drive motor of standard make. Electrical control panel with three speeds inch, single cycle and auto mode of operation. Two front sheet supports. Front operated manual back gauge. Pair of lifting links. Fine stroke adjustment rod with limit switches. One suitable 5 way die and blade. (Segmented or full length, EN-9, Not covered under warrantee) Movable console with emergency stop. Tonnage indicating adjustment device. Manual centralized lubrication system with a hand pump. Bending Chart. OPTIONAL ACCESSORIES   NC Back Gauge Motorized Back Gauge with D.R.O. Finger for standard Back Gauge Automatic Lubrication System.

• Type: Motion Sensor
• Application: Passage
• Voltage: 230VAC
• Brand Name: Oob Automation
• Country of Origin: India
• Color: White

operating voltage-220v-240v hf system-5.8ghz cw radar, ism band operating applience-1no detection distance -1m-8m(radius)adjustable detection range-360' warranty-3 year

• Country of Origin: India
• Type: Hydraulic Brake Press
• Certification: CE Certified
• Application: Bending Sheet

AMAVI Brand CNC NC Hydraulic Press Brake Capacity 65 ton to 600 ton Length 6000mm 

• Brand Name: ELLICO
• Supply voltage: 415 VAC , 50Hz ± 5%
• Output Relay Contact: 1 No
• Output Contact Rating: 5 Amp , 240 VAC (Resistive)
• Unbalanced trip Setting: 50 v ± 10 VAC
• Trip time delay for unbalanced: 2 sec
• On time delay: 1min (fixed)
• Resetting: Auto Reset
• Enclosure: PVC box
• Dimension (HXWXD): (127 x 130 x 77 mm)
• Weight: 0.496 gms
• Operating condition temperature: -5°C to +55°C

• Country of Origin: India
• Type: Hydraulic Press Brake
• Brand Name: AMAVI
• Certification: ISO 9001:2008 Certified
• Color: Blue,Brown,Grey,Light White,Sky Blue,White
• Voltage: Other
• Condition: New
• Warranty: 1 Year
• Operating Mode: Semi Automatic
• Power: Other
• Usage: Sheet Bending

• Material: Raw material
• Type: Rubber Metal
• Brand Name: SRP
• Place Of Origin: Ahmedabad
• Usage: Automobile, mechanical, material handling, pharmaceuticals, construction industries etc.
• Variety: Bearing sleeve machine,mounts sandwich mounting,anti vibrating mounting etc.

We offer wide range of rubber metal bonded parts that are manufactured by our professionals using high-grade raw material. Some of the industries where our rubber metal bonded parts are widely used are automobile, mechanical, material handling, pharmaceuticals, construction industries and in sugar plants. The different varieties in rubber metal bonded parts offered by us are: bearing sleeve machine mounts sandwich mounting anti vibrating mounting padsisolators rubber solid tyres tailor-made mounting for vibrating roller machines engine mountings ‘o' mounting intra mounting roller mounting cusyfoot mountings double 'u' shear mounting

WE are manufacturer of Hydraulic Press Brake machine and shearing machine all Models are available like Manual Hydraulic Press Brake, NC press brake, cnc press brake, hydraulic shearing machine, NC hydraulic shearing machine

We are offering electro hydraulic thrustor brakes. Electro hydraulic thrustor: thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the.

• Brand Name: JEKSHINE
• Raw Material: Hydraulic Press Brakes
• Driven Type: Hydraulic
• Bending Material: MILD STEEL, STAINLESS STEEL
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic

We are well known for exporting of wide variety of Hyd.Press Brake

Due to our strict packaging guidelines, we ensure that the packaging is done using quality packaging material. We have an advanced packaging system and we use only high quality materials for ensuring complete safety during warehousing and transportation. Owing to our excellent Ahmedabad(India), we efficiently make on-time deliveries to the customers.   Feature : Automatically Restart The Motor After Resuming Of Power Supply Phase Failure Protection No-man Power Or Operator Require Unbalance Voltage Protection Reverse Phase Protection Led Indication For Operation Status

FEATURES :To prevent Dry Running (optional)Single Phasing Preventer providedOver Load Protection provided (optional)Can be used for any HP MotorAuto Start on healthy supply

• Country of Origin: India
• Operating Temperature: 0-20deg C
• Frequency: 50HZ, 60Hz
• Power: 10-15Amp
• Connector: Sensor Switches
• Hole Diameter: 20-40mm
• Setting Range: 0-1500pF

• Range: 20 MT to 600 MT

Manufactured using qualitative raw material, Our organization is prominent manufacturers of CNC Hydraulic Press Brake, which is appreciated for simple operation and provide maximum output.

Photoelectric Sensor, Indication Of Broken Thread Of Respective Row Displayed By Led Both Side Front & Rear Side Led Indicator. Easy Of Operation Due To Pcb Easily Removed. Quick Action In Case Of Thread Break Yarn Breakage Levers For Fine And Coarser Yarn. Individual Locking Of Each Lever In Case Not In Use Individual Row Can Be Skipped For Opertion Or Not In Operation. Frame Structure From Alluminium Material. Sensitivity Range Of Sensor Is Variable From 100 Mm To 1000mm Single Row Indication Incase Any Yarn Break In Stop Motion Dust Proof Open Type. So It Is Easy To Clean. Hole Type Ceramic Both Side Of Stop Motion For Avoid Ballooning Of Yarn. More Then 400 Unit Install All Over India In Verison Machine Powder Coated Structure. Easy To Replace Liver.   SPECIFICATION Different Dimension Available: Pitch: 150 mm to 350 mm   Deck: 6 to 16   Ends: 384 to 1500   Lever to lever center: 14.6 mm   Operating Voltage: 12 Vdc Output Type: Relay No/nc Contact. Sensor Type: Photo Electric Sensor         Both Side Ceramic Streep Alluminium Angel Support For More Than 32 Hole Strip   APPLICATION stop motion Photoelectric Sensor, Indication Of Broken Thread Of Respective Row Displayed By Led Both Side Front & Rear Side Led Indicator. Easy Of Operation Due To Pcb Easily Removed. Quick Action In Case Of Thread Break Yarn Breakage Levers For Fine And Coarser Yarn. Individual Locking Of Each Lever In Case Not In Use Individual Row Can Be Skipped For Opertion Or Not In Operation. Frame Structure From Alluminium Material. Sensitivity Range Of Sensor Is Variable From 100 Mm To 1000mm Single Row Indication Incase Any Yarn Break In Stop Motion Dust Proof Open Type. So It Is Easy To Clean. Hole Type Ceramic Both Side Of Stop Motion For Avoid Ballooning Of Yarn. More Then 400 Unit Install All Over India In Verison Machine Powder Coated Structure. Easy To Replace Liver. Different Dimension Available: Pitch: 150 mm to 350 mm   Deck: 6 to 16   Ends: 384 to 1500   Lever to lever center: 14.6 mm   Operating Voltage: 12 Vdc Output Type: Relay No/nc Contact. Sensor Type: Photo Electric Sensor Both Side Ceramic Streep Alluminium Angel Support For More Than 32 Hole Strip For Sectional Warping Machine. For Direct Warping Machine.  

We are offering kiln spark plug. Mfg. And trading all types of ignition electrode for ignite of any liquid or gaseous fuel.

Specifications We are one of the leading organizations engaged We are a prominent organization engaged in manufacturing and exporting of an exhaustive range of quality molded rubber components industrial rubber components. Our range includes Bakelite Knob Rubber Rollers Self Adhesive Strips Trolley Wheels and Rubber Sheets

• Material: Cast Iron
• Color: Blue
• Voltage: 24 V
• Capacity: 40 Kg
• Brake Diameter: 150mm
• Speed: 14000 RPM

• Voltage: 400/440 Volts ,3 Phase AC
• Country of Origin: Made in India
• Brand Name: SMI
• Condition: New
• Application: Industrial
• Drum sizes: 100mm to 600mm
• I Deal In: New Only
• Drum Diameter: 4to 30 inch
• Usage/Application: Eot Crane

Auto Door, Capsule Lift, Car Lift, Car Parking System, dumbwaiter elevators

With rich industry experience and knowledge, we are offering our clients a wide array of Rubber to Metal Bonded Part. These parts are staggeringly examined on the predefined parameters of quality, finish, design and durability under the stern vigilance of our quality analysts. Our ingenious team of professionals inculcates the highly advanced technology and pristine quality rubber to manufacture it. Apart from this, our offered metal bonded parts are made available at pocket-friendly rates.Specifications: Material: rubber, metal Material grades: customized Size: varies Shape: as per the application Features: Strong design Ease of installation Durability

Bhavya Machine Tools offers hydraulic press brake. It is mainly useful for bending metal sheets and plates. These tools are made using top grade materials.

we bring forth for our clients an extensive assortment of high quality precision auto components which is manufactured using premium quality raw material and advanced technology. highly acclaimed in automobile industries, we provide these components in a variety of specifications and customizations as per the detailed requirements of our clients. additionally, these components are rigorously checked by our quality controllers to render a flawless supply at clients' end. clients can avail these components from us at industry leading prices. features: high strength corrosion resistance precisely designed

• Feature: Extra heavy duty application, Locked to the base, Oil and fuel resistant
• Material: Elastomer Rubber
• Color: Black
• Usage/Application: Industrial
• Hardness: 65 to 85 HRC

Silencers can be provided to reduce the noise level of the blower. Mittal designs and manufactures inlet filters with silencers as per discharge of the fan.  

With enriched industrial experience and knowledge, we are providing an excellent range of Auto Doors to our clients. Designed with utmost precision, the offered products are manufactured using optimum quality raw material and advanced technology at vendors end. In addition to this, our products undergo various tests under the supervision of quality controllers, in order to ensure its flawlessness. Clients can avail these panels from us, at market leading rates. These panels are highly acknowledged to control various processes at one time and also for their efficient power distribution.

• Type: Surface Mount Microwave
• Sensor Type: Surface Mount
• Power Consumption: Approx 0.9W
• Min Time Delay: 30 Second
• Detecting distance: 15m
• Load type: AC
• Brand: Vision
• Item Model Number: VIPL MS790
• Height: 15 Ft
• Weight G: 80 Gram
• Rated Load: 800W (Incandescent), 300W (LED Load)
• Install Height: 1.5-3.5m
• Color: White
• Power Source: 220-240V/AC
• Detection Range: 360 Degree
• Time Delay: Min: 10Sec, Max. 12Min
• Detection Distance: 1-8m (Radius), Adjustable
• Ambient Light: 3-2000LUX
•  :  

• Type: Wireless
• Brand Name: DSC
• Color: WHITE
• Model/Type: Wireless Motion Sensor - WS4904W
• Sensor Type: Wireless Motion Sensor
• Weight G: 27 kg