Axial Flow Pump Dealers in Ahmedabad

• Type: Axial Flow Pump
• Application: Agriculture, Deep Well Pumping, Household
• Weight: 10-20kg, 20-30kg
• Color: Multi Colour
• Voltage: 220V
• Automatic Grade: Semi Automatic
• Power: 1-3kw, 3-6kw
• Power Source: Electric
• Pressure: High Pressure
• Warranty: 1year

three- or four-vane axial flow propeller is hydraulically balanced via pressure equalizing balance holes and a top propeller hub wear ring to reduced axial down thrust. outer flanged columns are bolted together with through bolts for ease in assembly. Alignment is maintained via centering fits on all parts flared suction bell provides a smooth waterway entrance to the impeller and has integral splitters to reduce inlet swirl and entrance losses stator case with integral diffuser vanes may be either a single-piece casting or a fabrication. discharge elbow may be located above or below ground and at any outlet orientation. seal chamber accepts packing or mechanical seal to suit service requirements.     opening parameters • flows to 181700 m3/h (800 000 gpm) • heads to 11 m (35 ft) • speeds to 1770 rpm • sizes 200 mm (8 in) to 3.1 m (123 in) • settings to 8 m (25 ft) the vaf is a vertical high efficiency, axial flow impeller pump together. We have a complete range of this type of pumps which are suited for applications that require large quantities of flow with low head.   characteristics • multi-stage vertical centrifugal pump, diffuser type bowl. • axial flow impeller, high efficiency. • can handle solids up to 14” diameter (365 mm). • counter clockwise rotation viewed from shaft coupling.   design features • api 610 latest edition construction available (vs3 type on special request only) • above or below base discharge. • discharge elbows designed to reduce friction losses, diffusers designed to minimize turbulence and increase efficiency. • product, oil or fresh water lubrication. • rotor ‘pull-out’ design available.   standard construction materials • bowls: cast iron with bronze impeller. • column: carbon steel with aisi-1045 shaft. • discharge head: fabricated steel.   optional accessories • basket type strainer. • extended suction bell (umbrella) to minimize vortices.   applications • flood control, • water treatment, • shipping, • ground water development and irrigation, • cooling water (power), • dewatering and water supply (mining), • agriculture   industries • mining, • water resources, • power generation, • general industries

• Brand Name: K-TECH
• Country of Origin: Made in India
• Max Flow Rate: >10000m3/hr
• Model Name/Number: AXIALFLOW PUMP
• Motor Horsepower: as per capacity
• Head: 9 mtr
• Motor Phase: Three Phase
• Pump Type: horizontal
• Application/Usage: For Chemical Process & Pharmaceutical Industry
• Material: CI, CS, SS
• Liquid Temperature: 150' C.
• Max Working Pressure: 10 KG

The jec axial flow pump is unmatched in the industry for high volume low head pumping requirements, especially when corrosive andor abrasive solutions are involved. Mainly used in the following application: evaporator and crystallizer circulation phosphate, soda ash, potash and sodium chloride processing polypropylene reactors, xylene application black liquor evaporator, chlorine dioxide generators sewage digesters raw water pumping, flood control, marine ballast transfer.

• Max. capacity: 350 m3/h (1540 GPM)
• Max. pressure: 9 bar (131 psi)
• Max. temp: 95 °C (203 °F)
• Max. speed: 3600 rpm

FreFlow horizontal, handles gas and particle content Max. head : 80 m (262 ft) Materials: cast iron, bronze, stainless steel

• Type: Axial Flow Pump
• Application: Industry
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Power Source: Electric, Hydraulic
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Conditon: New, Used

• Brand Name: Mackwell
• Model Name/Number: Macflow
• Head: 2 m to 8 m
• Max Flow Rate: 6000 m3/hr
• Material: CI,Stainless Steel 316,SS 316L,Cd4mcun
• Liquid Temperature: 150*
• Max Working Pressure: 10 Bar

• Capacity: Up to 6500 M3/hr
• Temperature: Up to 150°C

Evanporator and crystallizer Circulation for Chemical,M Phosphate, Soda Ash, Potash and sodium, chloride processing for mining and minerals, Polypropylene reactors, Xylene for Petroleum, Sewage Digesters for Govt. Sector, Raw Water pumping, Flood Control, Marine Ballast Transfer for General use, Beet, cane, corn, Sugar Evaporators for flood industries.

• Type: Axial Flow Pump
• Application: Industry
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Power Source: Electric, Hydraulic
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Conditon: New, Used

• Capacity: Up to 6500 M3/hr
• Head: Up to 9 Mtr.
• Discharge Size: 150 mm to 600 mm
• Temperature: Up to 150°C
• Speed: Up to 2880 rpm

Applications:         Evaporator and crystallizer Circulation for Chemical.       Phosphate, Soda Ash, Potash and sodium, chloride processing for mining and minerals.       Polypropylene reactors, Xylene for Petroleum.       Sewage Digesters for Govt. Sector.       Raw Water pumping, Flood Control, Marine Ballast Transfer for General use.       Beet, cane, corn, Sugar Evaporators for flood industries.

Applications: The JEC Axial Flow pump is unmatched in the industry for high volume / Low head pumping requirements, especially when corrosive and/or abrasive solutions are involved. Mainly used in the following application: Evaporator and Crystallizer Circulation Phosphate, Soda Ash, Potash and Sodium Chloride Processing Polypropylene Reactors, Xylene application Black Liquor Evaporator, Chlorine Dioxide Generators Sewage Digesters Raw Water pumping, Flood control, Marine Ballast transfer       Design: The Axial Flow pump generates flow by the thrust or lift action of rotating axial vanes of the impeller. The pump has an elbow that directs the flow through the suction and out the discharge end of the pump. It can be used in the top orend suction configuration depending up on the need and Flange dimensions, bolt circle and holes comply with ANSI 816.5, 1508. The back pull out design (up to 14” size) allows for easy maintenance and repair as the rotating element may be removed without disturbing the pipe work. Pump has wear rings as standard and lifting eye on bearing bracket.

We are ISO 9001: 2008 Company, leading manufacturers of Chemical Process Pumps since the last 20 Years has carved for it self a niche in pumping and fluid control system.Centrifugal Metallic & Polypropylene pumps range specializes in virtually all forms of fluid transfer be it clear, corrosive liquids, slurry, solvent, etc. We have an answer to all types of fluid handling / pumping related problem.  Our Axial Flow Pump, also known as Propeller pump is best solution for low head, high capacity pumping. Range of Chemical process pumps comply with ISO, DIN & API standard to have high efficient technology to manufacture metallic pumps and polypropylene pumps for highly corrosive media like sulfuric acid, hydrochloric acid, highly corrosive slurry, solvents, chemicals, etc. We have established facilities at Odhav, Ahmedabad, Gujarat, India to Manufacture centrifugal chemical process pumps, Polypropylene pumps & Axial flow pumps to guarantee them by it's excellent quality system enforced and upgraded from time to time. this is also well supported by its continual acquiring new manufacturing standards in the field. This makes us ready to meet any Challenges in the fast growing competitiveness in the face of globalization.   JEC pumps is a professional manufacturers of Industrial centrifugal & axial flow pumps, Effluent pumps, Abrasive slurry pump, salt water pumps, sewage pumps, cleanable liquid pumps, Non-clog pumps, Thermic fluid pumps, Hot oil pumps & many more.

• Brand: JEC
• Head: up to 9 meter
• Max Flow Rate: up to 20,000 m3/hr
• Material: Cast Iron, Austenitic Stainless Steels, Duplex Alloys, Nickels, Nickel Chrome Alloy & other alloy
• Size: 6 - 40 inch
• Temperature: 300 Deg C