Batch Mixers Dealers in Ahmedabad

• Country of Origin: India
• Type: Paddle Mixer Machine
• Condition: New
• Automatic Grade: Fully Automatic
• Driven Type: Electric
• Brand Name: ARVINDA BLENDERS
• Application: MIXING AND BLENDING
• Warranty: 1 YEAR
• After-Sales Service Provided: YES
• Mixer Type: PADDLE TYPE

• Total Volume Liter: 500
• Working Volume Liter: 300

Conical screw mixer is generally used in case of applications that require gentle mixing action and minimal heat generation without any product distortion. The Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product in Food, Chemical Pharmaceutical, Minerals, Guar Gum, Starch and Cellulose. The Nauta mixer offers low operative cost than any other types of mixers.

• Shorter mixing time: 4 to 10 Minute.

The Nauta Cone screw mixer is generally used in case of applications that require gentle mixing action and minimal heat generation without any product distortion. The Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product in Food, Chemical Pharmaceutical, Minerals, Guar Gum, Starch and Cellulose. The Nauta mixer offers low operative cost than any other types of mixers. The Nauta mixer is a planetary rotating screw near the wall of cone without end resting of screw. The principle of blending is based on the differential travel speeds of product particles in the conical section of the vessel. The material from the bottom section of vessel is lifted by the screw and spread over the upper sections. The screw agitator turning on its axis produces a lifting action as it spirals the material in an upward flow. At the same time the screw orbits the tank, the screw removes material away from wall and deflects it into the centre of the tank setting up a spiral current thought the batch. The material lifted by the screw gravitates downwards thoroughly intermixing with materia

• Brand Name: MGGB,MGGB
• Driven Type: Electric
• Color: White, GREY
• Condition: New
• Automatic Grade: Automatic
• Application: TO MAKE PASTIC PRODUCT RECIPIE
• Certification: ISI Certified
• Voltage: 220V
• Production Capacity: 150KG TO 1000KG
• Type: Gravimetric Blender
• Weight: 100-1000kg
• Warranty: 1year
• Country of Origin: India
• Warranty: 1 YR. OF MANUFACTURING
• Material: SS304

As a leading manufacturer, exporter and supplier from Ahmedabad, Gujarat, we offer optimal quality Sigma Mixer which is widely used in pharmaceuticals, chemical, food industries etc. It comprises of high grade stainless steel and carbon steel that makes it durable and provides smooth blending of high viscosity materials. The kneaders of the Sigma Mixer along with efficient blades help in perfect blending. These are highly demanded by our customers for economical pricing and less power consumption.

• MODEL: YI-30
• OUT CAPACITY: 30 M3 / HR.
• HOPPERS: 4 x 2.0 M3
• MIXER: PAN TYPE
• BATCH CAPACITY: 0.75 CU.M / 750 LTRS.
• WATER PUMP: SUBMERSIBLE TYPE
• ADDITIVE TANK: 100 LTRS.
• ADDITIVE PUMP: SELF PRIMING
• CEMENT SILO: 1.5 TONS
• CHARGING CONVEYOR: 8.0 MTRS. (L) x 800 MM (W)
• DISCHARGE HEIGHT: 2.5 MTRS.
• OVER ALL DIMENSION: 2.4 M (W) X 4.5 M (H) X 18 M (L)
• TOTAL WEIGHT: 12,000 KGS.
• TOTAL CONNECTED H.P.: 64.0 H.P.
• POWER SUPPLY: 415 V, 50 Hz, 3 PHASE, A.C.
• MOTORS:  : WEIGHING CONVEYOR
• 5.0 H.P.: CHARGING CONVEYOR
• 5.0 H.P.: PAN MIXER
• 30.0 H.P.: WATER PUMP
• 3.0 H.P.: SCREW CONVEYOR
• 10.0 H.P.: ADDITIVE PUMP
• 0.5 H.P.: HOPPER VIBRATOR
• 1.0 H.P.: CEMENT VIBRATOR
• 1.0 H.P.: CEMENT WEIGHER
• 0.5 H.P.: COMPRESSOR
• 5.0 H.P.: HYDRAULIC POWER PACK

Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The Nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. Silent equipment offers you trouble free operation. The sizes of Nauta mixer available are 500 liters to 20000 liters.Application In:Food, Pharma, Chemical, Minerals, Guar Gum / Starch / Cellulose etc.

• Application: Industrial
• Weight: 200-400kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

Easy access to all material contact points for fast and safe cleaning during color or resin changes. Material compartment access doors, removable weight bin, mix agitator and mix chamber liner allow quick efficient cleaning. Features Spot-on accuracy - Blend accuracy to 'A of 1% Repeatable, consistent performance job to job Simple to use touch screen control Quick recall recipes gives repeatability you need Improved accuracy on lower dosing percentages Fast accurate response times Enhanced algorithms provide better weight reading accuracy Diagnostic screen display target set-point percentage and actual percentage dispensed Precision ratio control - all components Instantly see your materials usage Set and save 1000 different recipes

• Voltage: 380 v
• Capacity: 100 kg

Paddle Mixer that can mix subarid rigid concrete, plastic concrete & flow ability concrete. The paddle mixer offered by us is obtainable in a variety of specifications so as to meet the variegated requirements of customers. This paddle mixer undergoes a rigorous testing process that is carried out by our experts in order to ensure its flawlessness. We provide this paddle mixer after checking on several parameters to supplying defect free range.

We offer Nauta Mixer. Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The Nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of Nauta mixer available are 500 liters to 20000 liters. Application In: Food, Pharma, Chemical, Minerals, Guar Gum Starch Cellulose etc

This machine is designed and manufactured under the guidance of skilled professionals in compliance with international standards. The offered range of Paddle mixer machine is known for its robust construction, unmatched performance, easy usage, reliability and longer functional life. Available in various specifications, this machine can be custom designed as per the needs the clients within the promised time frame.

Bubble Gum Sigma Mixer Machine is uses for kneading high viscous bubble gum base materials made of rubber. Machine is having heavy duty design with suitable gauge metal in bowl, blade, cover and jacket for heavy structure to deal with high viscous gum base. Subsequent higher capacity motor and sturdy gearbox provided matching to product parameters. Jacket is offered with mild steel or stainless steel for heating and cooling requirements.Chewing Gum Sigma Mixer Machine is having usage in mixing centre filled bubble gum base, chicklets chewing gum base etc.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Nauta Mixer to Mixing the Material.Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The Nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of Nauta mixer available are 500 liters to 20000 liters.

Sigma Dough Mixer Application & Process :   The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses. The sigma Sigma is a double arm mixer, the two "Z" blade rotate towards each others at same or different speed inside a W- shaped product container. The twin screw basin kneading machine with two horizontally arranged kneading blades, which are deeply geared into one another and strip themselves reciprocally. Each blade moves the material in opposite direction thereby providing excellent cross mixing of all raw materials. The blades pass the trough walls and each other at close clearances resulting in good mixing. The close clearance produces a shearing and tearing action that is beneficial to the size reduction of solids. Selection of appropriate blade shape and speeds result in excellent mixing   Double Arm Sigma Mixer Adavntacges Two mixing blades placed in a 'w' shaped horizontal trough Commonly used blade types are the sigma blade, masticator blade, spiral blade, shredder and naben blade Rotation of the blades is either tangential to each other or the blades may overlap within the trough. Blades pass the container walls and each other at close clearances generally (1-2 mm) The mixer bowl may be jacketed for circulation of heating or cooling media. Viscosity range upto 10 million cps Viscous mass of material is pulled, sheared, compressed, kneaded and folded by the action of the blades against the walls of the mixer trough. Fill Up is 40 – 65 % of bowl volume Mixing homogeneity upto 99 percent Specific power – 45 to 75 kW/ m3 Discharge of the material from the mixer By tilting of the mixer container Bottom discharge valve Through an extruder, screw

• Brand Name: BE
• Capacity: 30KG batch
• Discharging volume: 2200 L

Trumatic  offers cone-screw-processor which is a dry sold blender. The cone-screw-processor is used to achieve a homogeneous product with efficiency and safety. Apart from being used as a blender, the other appli­cations of this system are as reaction vessel, air and vacuum dryer, emulsifier and live storage hopper.The cone-screw-proces­sor has an ability to dis­perse minor ingredients uniformly in cycle times faster than those of con­ventional mixers. Short cycles-times are achieved as a result of the double blending action in these units.The orbital action of the helical screw rotating on its own axis carry the material upward and sec­ondly, the revolution of this screw about the centre line of the cone-shaped shell along the wall gives top to bottom circulation.Many models are available for mixing of dry solids, pastes, liquids, emulsions and suspen­sions. These cone-screw-processors are manufac­tured in mild steel, stain­less steel and special alloy steel. Whenever neces­sary special coating and internal linings are pro­vided for handling corro­sive materials.

• Brand Name: Adinath
• After-Sales Service Provided: Engineers available to service machinery overseas
• Supply Ability: 5 Unit/Units per Month
• Machine Type: Mixer Kneader
• Packaging Details: Product & Transport Worthy Packing
• Model Number: Sigma Mixer

Paddle mixer consists of several elements: a centrally mounted horizontal shaft that rotates within a cylindrical container, paddles, ploughs or other shaped mixing elements that are attached to the centrally mounted shaft, special openings at the top for feeding materials, flush fitting access doors at the front of the mixer, a flush fitting discharge valve at the bottom of the mixer, which is pneumatically or manually operated, inside a cylindrical conduit and a complete drive unit.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Nauta Mixer for industrial mixing machinery.Nauta Mixer is Ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The Nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of Nauta mixer available are 500 liters to 20000 liters.

• Mixing Capacity (kg): 100
• Power (KW): 4

Paddle mixer ARE HIGHLY SUITABLE FOR MIXING THE MATERIALS HAVING HIGH VISCOSITY, WITH LIQUIDS OR BINDERS BY MIXING DRY MATERIALS. ALL THE PRODUCTS ARE FABRICATED BY USING THE FINEST GRADE CARBON STEEL AND STAINLESS STEEL. TO ENSURE EASY MIXING, THE MIXERS ARE INCORPORATED WITH HEX SHAFT AND BALANCED PADDLES. APART FROM THIS, WE ARE OFFERING THE RANGE OF PADDLE MIXERS AT COMPETITIVE PRICE.

The Conical Screw Blenders we offer are widely demanded amongst the clients for their safe use. These products are made by using high grade material which is sourced from reliable vendors of the industry. Moreover, one can get these products in committed time frame. These products are highly reliable. Features: Safe use Reliable Durable

Sigma Mixer with Extruder Screw Uniform Kneading, Mixing and Extruding Process Application & Process : The Sigma Mixer with extruder is used for mixing, kneading and extruding of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses. The extruder mixer is designed to handle difficult to discharge products such as hot melts and butyl sealants, as well as other medium to high viscosity pastes. This type of mixer combines the action of the Double Arm Sigma Blade Mixer with an extrusion screw placed in the lower part of the mix trough. During mixing, the extrusion screw is run in reverse which imparts a third mixing action on the product, increasing mixing efficiency.     The sigma kneader is a double arm mixer with extruder, the two "Z" blade rotate towards each others at same or different speed inside a W- shaped product container and extruder screw is located between the two blade with separate gear motor drive. The extruder screw is rotates in forward direction for extruding process and rotate in reverse direction during mixing process. Speed of the extruder to be adjustable by VFD. The twin screw basin kneading machine with two horizontally arranged kneading blades, which are deeply geared into one another and strip themselves reciprocally. Each blade moves the material in opposite direction thereby providing excellent cross mixing of all raw materials. The blades pass the trough walls and each other at close clearances resulting in good mixing. The close clearance produces a shearing and tearing action that is beneficial to the size reduction of solids. The extrusion screw is located in the saddle section and runs in a cylindrical trough tangential to and below the 2 mixing blades. When the product has finished the mixing cycle, discharge/extrusion is performed simply by running the extrusion screw in a forward direction. The double arm sigma blades normally continue to run throughout the extrusion process providing a thoroughly mixed product at all stages of the production cycle. By changing the extrusion die heads, the product can be discharged in round, square, "spaghetti", or any form desired. Speed variation of the extrusion screw allows adjustment of the product flow, depending on the viscosity. Salient Features : Designed as per cGMP - Current Good Manufacturing Practices & Non GMP Standard Model. Contact parts in AISI 316, AISI 304 or MS as desired by customer. Capability to pass from mix phase to extrusion phase without interruption. Lateral discharge of product through the extrusion screw without operator interaction. Shape of extruded material is adaptable to customer's requirements. Mixing, Blending and kneading of high Viscosity Materials, with a combined action of Bulk Movement, Kneading, stretching folding, dividing and Recombining. High Mixing Precision, Short Batch Time, Problem free Cleaning and Residue Free Discharge. Automated mixing and granulating process in single bowl. Available in Capacity from up to 1000 Kg Industrial Productions. There are different types of blades: Sigma-"Z" blade, Spiral blade, and Naben blade. Selection of appropriate blade shape and speeds result in excellent mixing. Optional Features : PLC Controls with HMI touch screen Binder spraying system Product Bowl with Jacketing for heating and cooling. Flame Proof Electrical. Vacuum or pressure designs Automatic control of blade speed based on product viscosity. Safety Features : Enclosed mixing and discharge provides protection from product contamination and greater operator safety. Total drive transmission system enclosed Limit switch installed in the top lid ensure lid is closed Overload relay Protection and Emergency stop button

We ultra febtech - an iso 9001:2008 certified company engaged in manufacturing of nauta mixer to mixing machinery.nauta mixer is ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of nauta mixer available are 500 liters to 20000 liters.

• Warranty: 1 Year
• Voltage: 240V
• Power: 5 HP
• Driven Type: Electric
• Capacity: 100 Pieces Per Hour
• Material: Mild Steel
• Phase: Single Phase
• Automation Grade: Semi-Automatic
• Frequency: 50 Hz

We ultra febtech - an iso 9001:2008 certified company engaged in manufacturing for nauta mixer industrial mixer machinery and equipment.nauta mixer is ideal mixer to mix various small lots to make uniform one lot or to mix many large proportions of powders to a uniform product. This should be perfect choice. The nauta mixer offers low operative cost than any other types of mixers. A planetary rotating screw near the wall of cone not only mixes the powders but also breaks the lumps. A silent equipment offers you trouble free operation. The sizes of nauta mixer available are 500 liters to 20000 liters.

• Color: Green
• Material: Mild Steel
• Capacity: 50-500 Kg
• Categories: Mixing Equipment
• Power Load(HP): 10-20 HP
• Design Type: Customized
• Automation Grade: Automatic
• Material: Mild Steel or Stainless Steel

We manufacture Laundry Soap Mixer Machines which are used in the manufacture of detergent cakes and toilet soaps.