Battery Testers Dealers in Ahmedabad

We make available Battery Load Tester with Latest Microcontroller Based technology, which is used for testing battery's power capacity at manufacturing end or battery charging station. Battery Load Tester is available for Battery with capacity range from 2.5 AH To 220 AH by means of different Models. We are one of the most prominent Battery Load Testers Manufacturers and Suppliers of based in India.Features : Wide Applicability : Battery Load Testers are used in different applications like battery manufacturing units, battery dealers, battery charging stations and many more. LED Indicator : We offer our battery load testers with LEDs in four attractive and vibrant colors which indicate the precise status of the battery Voltage before test ,during test and Remember / save last Battery Voltage & Battery Status continuously display after the load test till nest test. A 4 Digit red LED digital display read out of battery voltage & Battery Status asGoodLoBedDuring Load Test is provided. Capacity Range : Our load battery testers are available in three different Models capacities to suit needs and requirements of our clients. In each Model the capability of Battery under Test is describe as under. Salient Features : Selector Switch : Three & Four Selections are offered to select Battery capacity in AH under Test. Input Supply : It is a Self Powered Equipment useful for single 12 V Battery. Its Operating Voltage is 8.0 V to 14.5 D. C. Digital Display : A 4 Digit Red LED Digital Display Continuously show Battery Voltage with Two digit decimal Point accuracy before, during & after Load Test. It also flashes Battery status as: Good, Lo, Bad in alphanumeric along with Battery Voltage during the Test. After completion of Battery test, Last Battery Voltage & its Last Status, Good, Lo , Bad will be Save / Remember & Display Continuously till next test. LED Annunciation : Four Different Colored LED Annunciators are provided showing continues Battery' Status before, during & after Load Test. RED - BLUE LED ON : During Battery Test time it will Flash with Red & Blue Color. GREEN LED Annunciator ON : In case of Battery's Voltage is 12 V to 9.5 V D.C. Called Battery is O.K. "Healthy ". BLUE LED Annunciator ON : In case of Battery's Voltage is 9.5 V to 8.5 V D.C. Called Battery is - "Weak "still to be Charged. RED LED Annunciator ON : In case of Battery's Voltage is Bellow 8.5 V D.C. Called Battery is "Bad " -- failed , to be replace by new Battery. YELLOW LED Annunciator ON : If Battery terminals are connected Reverse Called "Battery Reverse Polarity ". A Handy Powder Coated Cabinet with Full Ventilation along with FAN at top side is provided to cool down internal Heater coil to Extend Instrument Life. In Model : BLT / 400, in both Crocodiles at Top side two 2.5 mm thick Copper Plates are fitted to Grip battery terminals, so as Copper Plates will carry total Load Current & Crocodile Spring will not heated up. So it will extend grip & its Life.   Operation : A Battery under Test is connected to Load Tester Crocodile with Correct Polarity. A "Press to Test "Push button is provided. As soon as it is pressed 6 Second Timer start, during this time Red - Blue LED is flashing. A 4 Digit Display will show Battery Voltage & Battery Status Good, Lo, Bad in Flashing Mode & also Glowing appropriate LED Annunciator during Test. Last Battery Voltage & its Status on LED will be Save & display continuously till new test.Cabinet : A Table Top Handy Portable Tilted Powder Coated CRCA cabinet with Full Ventilation and a Fan at Top roof inside to dissipate heat generated in Heater Coil.

Geltronix is one of the leading manufacturers, exporters and suppliers of efficient battery load tester, which is used to evaluate the condition of a battery. We are a manufacturer of artificial load testers which are used for battery bank discharges. They are available in dc and ac load bank. These are very useful for load to discharge of battery set. It’s used by banks, telecom operators, battery manufacturers, etc. Our battery load tester consists of a large and high utility resistor which has resistance equivalent to a car’s starter motor. The battery load tester manufactured by geltronix, is equally productive for all types of battery testing, like performance, static and dynamic testing of a battery. Our product is put into service only after passing the supply of machinery (safety) regulation.

Battery Powered Flow meter Flo Reader program of battery-operated water meters gives you the flexibility to install a reliable water flow meter virtually anywhere without sacrificing accuracy or performance. No mains power is required. Flo Reader engineered for stand-alone water applications such as Water treatment, distribution network, irrigation, etc.   SPECIFICATIONS: Function  : flow Rate indicator Indicator & totalizerFlow Rate Range    :0.5 to 5 m/s (1.6 to 16.4 ft./s)Pipe Size Range    :15 NB to 300 NB (0.5 to 12 in.)Display    :7 digit numeric customize LCD displayInput Supply:2 X 1.5 VDC Duracell batteryAccuracy    :± 2.5% of full scale deflectionMeter size:96 mm x 96 mm X 85 mmProtection Rating  : IP 65 ( weather proof enclosure )MOC: ABS for enclosure & PP for sensorOperating Pressure :5 bar(145 psi) maximumOperating Temperature:55° C maximum   FEATURES Proven technology Economical Totalizer function Easy Installation & calibrations No Special batteries required Modular construction Can be mount Horizontally / Vertically Can be rotate display 360

Permeability Testers, three cell and six cell models (AIM 437, AIM 438) Ref Stds : IS 1727/2645.   Permeability Testers are supplied with 3/6 cells to conduct permeability test on pozzolana cement mortar and cement mortar with or without the addition of integral water proofing compound is carried out using a brass cell of 100 mm dia and 50 mm high. Each cell with collar is clamped in-between a base plate and a top plate with the help of tension rods and nuts. The cell assembly is mounted on the stand. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet.   Application Permeability Test Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Tiles Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

• Weight: 545 g
• Size: 10mm * 240mm * 50mm
• Operating temperature: -20-55 ℃ /-4-131 ℉
• Display: Large backlit display screen (3 inches )

• Brand Name: manateck
• Usage: Industrial
• Rated Voltage (V): 12 Volt
• Rated Capacity (Ah): 2 - 200 Ah
• Battery Compatibility: 9 Volt, AA, AAA, D, 1.5 Volt
• Data Hold: Yes
• Warranty: 1 Year

• Voltage: 12V-500V
• Warranty: 1 Year
• Applications: Banks , Industries , Hospital ,Telecom operators , Battery
• Brand: Geltronix
• Model: BLT001
• Usage: Industrial
• Current: 5 Amp - 600 Amp

Battery Tester, Automobile Battery, battery charging systems

battery discharger, test equipment, Electronic Load, Power Supplies

battery testers, Batteries, Home UPS, Battery Chargers, Inverters

Automatic Battery Load Tester, Aluminum Pcb, Double sided PCB, prototype pcb

dry cell battery testers, microprocessor, Microcontrollers