Best Bond Construction Chemicals Odhav, Ahmedabad, Gujarat

We are reckoned among the preeminent Manufacturers and Suppliers of Tiles Adhesive. Our Tile Adhesives are known for their high performance. It is waterproof, crack free and meets the requirements of IS 15477. Buyers are free to place bulk orders of the Tiles Adhesive with us and we ensure its timely execution within the allocated timeframe.   Benefits : Excellent adhesion, Self-curing and quick strength development. Convenient : Less labor and time intensive, Ready to use (only water to be added). Low water absorption makes it water resistant & minimizes shrinkage cracks. smooth and levelled fitting of tiles . Area of Application :For fixing all types of tiles on external/internal floors & ceramic tiles on wall.Instruction for use : Mix powder & water (Ratio 3:1 by volume) under continuous stirring for 3-5 minutes to a homogeneous, lump free, soft & smooth paste consistency. Mix as much quantity, which can be used within 45-60 minutes. Spread the mixed adhesive to a thickness of approx. 3-6 mm & comb with a notched trowel. Strictly fit tiles within 25 to 30 minutes on it. Check by finger, if don’t stick then remove it. Start placing tiles and tap the tiles properly to ensure complete coverage of the backside of tiles & to eliminate the possibility of any air voids. Precautions : The surface to be tiled should be clean- contamination free & tiles back should wet. must be scratched to expose at 70–80% of the clean surface for better bonding. Allow tiling to set for 24 hours prior to filling joints fillers. Avoid use for fixing heavy tiles or stones, marble, granite etc on vertical areas. Avoid eye or skin contact. If occur wash with plenty of water & consult doctor.

CONSTRUCTION CHEMICALS Manufacturer, AHMEDABAD CALL: 9879797795, Mfg: Super Plasticizers, Waterproofing Chemical, Wall Putty, Tile Adhesive, Joint Filler SBR (Waterproof Plaster or prepare slurry coat) Styrene Butadiene Latex co-polymer based bonding agent and water proofing Compound GENERAL: SBR is suitable as admixture for obtaining waterproof concrete and mortars. It makes cement cohesive so prevents segregation and fills up capillaries results in effective waterproofing, fully passes the requirements of IS: 2645 -2003. BENEFITS: � Excellent coverage and increase weather resistance � High Bonding Strength improve durability. � Prevent leakage and dampness by reducing permeability. � Bonding slurry between hardened and fresh toppings of concrete AREAS OF APPLICATION: � As a waterproofing coating in repair plaster and crack filling as suitable for old to new mortar. � As a bond coating by mixing with cement make brush able slurry. � Convenient for Patch for repair or levelling of worn/ damaged concrete. Instruction for use � Surface for treatment must be thoroughly cleaned of all foreign particle like oil, grease, chemicals, other contamination and follow pre-wetting procedure. � In general, for normal repair mortars, we recommend 10%- 15% SBR by weight of cement. � All internal ways to enter water like pipeline leakage, cracks must be eliminated. � To prepare brush able coating slurry, add in cement by 1:1 ratio. Add water as per application and site need. TECHNICAL DATA: � Color: White � PH: 7 More or Less 1 � Dose: 10% to 25% of cement by weight � Self-life: One Year if kept sealed and dry. Consumption: If used to make waterproof slurry coat: Approximate 40-70 Sq. Ft. area in two coats within 4-5 hours. (SBR:Water:Cement ratio shall be 1:2:5)

Owing to our rich industry experience, we are capable of manufacturing and supplying excellent quality Plaster BB Waterproof Liquid-02 in Gujarat, India. Our BB Waterproof Liquid is widely used for internal and external plasters. It helps in increasing durability. We can provide BB Waterproof Liquid in small as well as bulk quantities to meet the diverse requirements of buyers. Our Plaster BB Waterproof Liquid is available at the most competitive prices.Details : BB Waterproof Liquid- 02 is most suitable admixture for exterior plaster work due better plasticizing properties. It makes cement cohesive so prevents segregation and fills up capillaries results in effective waterproofing. Benefits : Reduces water content in the mix making it cohesive. Increase durability and workability. Does not affect setting time and Strength of Concrete/ Mortar. Being liquid, it’s well dispersible in the concrete. Areas Of Application : Waterproofing of Toilets, Washrooms, Terrace, Balcony etc Plaster work, Masonry work All areas requiring water proofing treatments Instruction for use It should be mixed with gauging water or can be added to concrete during process of mixing BB Waterproof Liquid- 01 should be added @ 0.3% to 1% by weight of Cement   Precautions : Don’t add BB Waterproof Liquid- 01 directly in to cement Don’t add overdose of BB Waterproof Liquid- 01 Should not contact eye or skin. If contact wash with plenty of water and consult doctor.

The company shares glorious credentials with the eminent Manufacturers and Suppliers of Joint Filler. It is suitable for ceramic tile, vitrified tiles, marbles, granite, mosaics and natural stone on walls and floors for both internal and external application. Bulk orders of the fillers are processed by us as per the specific requirements of the buyers.   Benefits :   Enhances beauty of tiles by wide range of colors. Bonds to most construction materials with excellent durability. Easily coated with compatible toppings. Very "flow able" consistency – negligible shrinkage. Crack free long lasting tile joints filler so its water repellant.   Area of Application : All types of mosaic and ceramic tiles. All stones, marble or granite. Internal or external wall or floor. Instruction for use : For best results, use spacers and keep a minimum of 2 mm joint between tiles. If tiles are highly porous, do a sample test to check for possible staining To avoid  problem, mask the tiles before grouting.   Precautions : Ensure 24 hours’ time interval for grouting after tile fixing. Over addition of water may lead to over delay in setting time. Avoid contact with eye or skin if occur wash with water and consult Doctor.

We are ranked successfully amongst the topmost Manufacturers and Suppliers of Engineering Grouts in Ahmedabad, Gujarat. Our Grouts are manufactured under the supervision of experienced professionals who assures the finest quality. We provide Grouts that has wide industrial and constructional applications. We can provide Grouts in different forms and quantities so as to satisfy the needs of buyers. Our Engineering Grouts are available at market-leading prices.

Leveraging on our rich industry experience, we are enlisted among the distinguished Manufacturers and Suppliers of BB Wall Putty. Our BB Wall Putty is Cement based putty for silky finish of your dream property. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of the putty within the promised span of time.   Benefits :  Its water repelling properties prevents flaking of your expensive paints. It is damp resistant and provides a smooth finish with better compatibility. Its suitable for all kinds of paints due to best adhesive-strength and a long-life. Pigments are available to make putty as desired colorful consistency.   Area of application : Suitable for internal or external application on all plastered wall or concrete, hollow blocks, pre-cast walls, ceilings, calcium silicate bricks, aerated light-weight blocks etc. Instruction for use : Add water up to 40% by volume and stir well to make smooth silky paste. Mix vigorously for 6-8 minutes for making a lump-free and uniform. Mix putty in such quantities which can be used within 2 hours of preparation. Let it be dry for 3 day then clean tool marks by 180 grade emery paper. Curing is not required after applications of Wall Putty in normal temperature and interior walls, however, after application, just sprinkling of water over applied surface for 2 days will enhance the hydration of cement particles which will give better results. Precautions : Over water may lead to over delay in setting time. Paint the wall within a week to avoid weather effect on putty. Avoid contact with eye or skin if occur wash with water and consult Doctor.

Brand Name : BB Wall Putty

State : Gujarat

BB Super Admix 22 is one of the highly demanded products of our company. Our Super Admix 22 is formulated using Naphthalene base and other raw materials. It is highly suitable for pre-cast industries. Our Super Admix is available in different quantities according to the requirements of buyers. It helps in reducing water content upto 20%. We can deliver BB Super Admix 22 within the committed time frame.Benefits : BB Super Admix - 22 admixture makes concrete homogeneous and free from bleeding and segregation. Achieves early strength Suitable for pre-cast industries Helps in reducing cement content for required strength Reduces water up to 20%   Areas Of Application : Structural RCC construction Particularly suitable for pre-cast industries This super plasticizer makes concrete pump able and require minimum compaction Instruction for use For Flow able Concrete: 1% to 1.5% by weight of Cement For High Early Strength: 1.5% to 3% by weight of cement Mixing procedure should be continued for at least 2-3 minutes after addition of BB SUPER ADMIX- 22   Precautions : Don’t use BB Super Admix- 22 directly to concrete Over dose may lead to over delay in setting time Avoid contact with eye or skin

The company is enlisted among the topmost Manufacturers and Suppliers of BB Super Admix 21 in Ahmedabad, India. Our Super Admix 21 helps in enhancing the strength of concrete. It helps in reducing permeability, bleeding and segregation. Our Super Admix 21 improves the durability and strength of concrete. We can provide BB Super Admix 21 in small as well as bulk quantities to meet the diverse demands of buyers. Benefits BB SUPER ADMIX- 21 reduces water up to 15% - 20% It Improves slump and reduces permeability, Segregation and bleeding. Increase strength and durability of concrete   Areas Of Application Structural RCC construction BB SUPER ADMIX- 21 is particularly suitable for pre-cast industries It makes concrete pumping more efficient as improves flow ability.   Instruction for use BB SUPER ADMIX- 21 should be added at the rate of 0.5% to 1% by weight of cement Mixing should be continued for at least 2-3 minutes after add BB SUPER ADMIX- 21   Precautions : Don’t use BB SUPER ADMIX- 21 Direct to concrete Over dose may lead to over delay in setting time Avoid contact with eye or skin, If occur wash by plenty of water and consult doctor.

We are one of the reliable Manufacturers and Suppliers of BB SBR Admix 02 in Ahmedabad, Gujarat. Our Admix 02 is used for getting waterproofing bathrooms, ceiling and many more. It provides good coverage and improves durability. We can make available SBR Admix in different packaging sizes according to the varied requirements of buyers. Our BB SBR Admix 02 is available at the best prices in the market.Benefits : Excellent coverage and increase wether resistance High Bonding Strength improve durability. Prevent leakage and dampness by reducing permeability. Bonding slurry between hardened concrete and fresh toppings of concrete. Instruction for use Surface for treatment must be thoroughly cleaned of all foreign particle like oil, grease, chemicals etc. In general, for normal repair mortars, we recommend 10%- 15% BB SBR ADMIX by weight of cement. All internal ways to enter water like pipeline leakage, cracks etc must be eliminated. To prepare brush able coating slurry, add in cement by 1:1 ratio. Add water as per application and site need. Areas Of Application : As a waterproofing coating in repair plaster and crack filling as suitable for old to new mortar. As a bond coating. As Patch for repair or levelling of worn/ damaged concrete. Precaution : Avoid contact with eye or skin. If occurs wash by plenty of water and consult doctor immediatelyConsumption : If used to make waterproof slurry coat: Approximate 40-70 Sq. Ft. area in two coats (SBR:Water:Cement ratio shall be 1:4:6)

We are a credible Manufacturer and Supplier of BB IWPC Admix 02 in Gujarat, India. Our Admix 02 is easily dispersible in concrete. It has wide application in formulating waterproof toilets, balconies, terraces and many more. We use high-grade packaging material in order to keep its properties intact for longer duration. One can avail BB IWPC Admix 02 from us at the most reliable prices in the market. Benefits : Reduces water content in the mix making it cohesive. Increase durability and workability. Its economical in application Does not affect setting time and Strength of Concrete/ Mortar. Being liquid, it’s well dispersible in the concrete. Areas Of Application : Waterproofing of Toilets, Washrooms, Terrace, Balcony etc Plaster work, Masonry work All areas requiring water proofing treatments Instruction for use It should be mixed with gauging water or can be added to concrete during process of mixing BB IWPC ADMIX-02 should be added @ 0.5% to 1.5% by weight of Cement Precautions : Don’t add BB IWPC ADMIX-02 directly in to cement Don’t add overdose of BB Waterproof Liquid- 01 Avoid eye or skin contact. If occur wash with plenty of water & consult doctor.

We are reckoned as reputed Manufacturer and Supplier of BB Bond Admix 01 in Gujarat, India. Our Bond Admix is acrylic based bonding agent.  It is waterproof and therefore used for formulating water proof water tanks and basements. The BB Bond Admix works as a good bonding agent and helps in reducing cracks in screeds and mortars. We believe in delivering BB Bond Admix 01 at the desirable prices in the market. Benefits : Work as bonding agent Improve toughness and flexibility of mortars Reduces cracks in mortars and screeds Suitable for internal and external application Areas Of Application : Waterproofing of Terrace, Masonry surfaces, Toilets, Washrooms, Balcony etc As a bonding aid for old and new Concrete/ Mortar Patching work admixture Useful as an additive for preparation of repair mortars/ concrete Instruction for use : One PBW Cement + 3 PBW Sand (0.2 mm) + Mixing Liquid of BB BOND ADMIX- 01 and water 1 PBW eachPrecautions : Don’t keep mixed material open for more than 30 minutes Don’t take up application in hot climate Pre-wetting of surface by water is essential Consumption : Add Cement to BB ADMIX 01 at ratio 1:1 by Volume. Mix thoroughly. Apply 2 coats within 4- hours Properly clean and pre-wet surface before apply. 40-50 Sq. / Kg for neat application on Bricks, and with cement 25-30 sq. Ft/Kg.

We are well-known Manufacturer and Supplier of BB Accelerator 51 in Ahmedabad, Gujarat. Our BB Accelerator is chloride free and is suitable for all kinds of mortars and concrete. It has wide application at construction sites. We can provide BB Accelerator in small as well as bulk quantities. Our BB Accelerator 51 is packaged using moisture-proof packaging material ensuring longer shelf life and safe delivery.   Benefits : Possible to reduce setting time to desired range. Its excellent accelerating properties can be best availed at pre-cast concrete yards, for rapid de-molding of shutters despite of low temperatures and underwater work.   Areas  Of Application : Concrete and mortars for Low temperature and wet weather.Pre-cast and reinforced concrete like Concrete block, RCC Pipes, Sleepers. Under water Concreting, PCC work,   Instruction For Use Accelerator- 51 should be added at the rate of 1% to 3% by weight of Cement. Add to the gauging water & mix immediately as cement rapidly start to set. While using in mortar to seal leakage, mix 1-3 % with cement to make slurry consistency.   Precautions Avoid contact with eye or skin. Protected from Direct sunlight and use mixture immediately.

Brand Name : Best Bond

Material : Setting time Accelerating chemicals

Application : Smooth and early mould release for Pre cast cement products

Feature : smooth finish and strong products

Place of Origin : Ahmedabad