Bifurcated Fan Dealers in Ahmedabad

Bifurcated Axial Fans are designed to move large volumes of hot and/or corrosive air at low pressure. The Bifurcated or split casing diverts the air flow on either side of the motor compartment and rejoins again downstream, leaving the motor open to clean, ambient air outside the casing.

• Size: Bifurcated Fans offer a range of diameter sizes: 310,450, 610, 750 & 910 mm (Higher size can be supply on special case).

Mittal Bifurcated Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed that can handle hostile environments. The fans designed with split airway and the motor protected from the handled air by having its own compartments. With fan motor isolated from the main air stream, the Bifurcated fan can handle a wide variety of saturated and, dust-laden atmospheres, heated air, corrosive fumes and hot gases with no detrimental effect to the motor.Standard fans can handle elevated air temperatures of up to 150 Deg C in the duct system whilst the motors operate at a relatively lower ambient temperature within the motor compartment.

» Bifurcated Fans specially designed for handling hot, corrosive gases. The drive direct / vee belt is totally isolated form gas stream  » Applications: Chemical, fertilizer, paper plants, etc.   Accesories:  » SILENCER: For applications requiring quiet operation, customs built attenuation packages can be provided on the fan inlet or outlet. attenuators are aerodynamically and are designed to significantly reduce noise while adding only minor resistance to air flow. Variable Inlet Vane: For frequent continuous volume control, a variable inlet vane can be provided. Variable inlet vanes are available for each specific fan size and are bolted to the fan's flanged inlet. The vane action during dampering works to spin the air in the direction of the wheel rotation this resulting in lower power consumption. Vane mechanism is outside of the air stream and is controlled buy a single vane lever. Variable inlet vanes can be set up for manual or automatic operation. The variable inlet vane's inlet is flanged and drilled to accept ductwork or and inlet bell as the system requires. Bird Guard: Safety screening can be provided for installation in the fan inlet, fan outlet, cone or belt. Spark-Resistant Construction: Belt Drive / Direct Drive with Spark-Resistant Construction are available. Inlet Bell: For systems with not ductwork on the fan inlet, it is advantageous to install an inlet bell is a torosoidal shape to avoid inlet losses. The inlet bell is a torosoidal shape to provide a smooth entrance to the fan. Inlet bell are flanged and drilled to mate up with the fan's flanged inlet. Inlet/Outlet Cone: Transition pieces, called cones, can be provided for both the inlet and outlet. Cones are provided to adapt from the fan diameter to the adjacent ductwork diameter. Cones are flanged on both ends and drilled to mate up with fan's flanged. Cones are available with an access door if required. Outlet cones can be utilized to affect performance and transform velocity pressure into static pressure. Companion Flanges: For ease of installation of adjacent ductwork, companion flanges can be provided. Flanges are rolled angle rings, drilled to match the fans inlet or outlet flanges.   Details required for Quotation:    » Application  » Gas to be handle  » Capacity (M3/Hr Or CFM)  » Pressure (inch WG Or mm WG)  » Working Temperature (°F Or °C)  » Type of Drive

Bifurcated Fans, Centrifugal Fans And Blowers, Tube Axial Fan