Boiler Tubes Dealers in Ahmedabad

Our Seamless Tubes are manufactured by the Cold Drawn Process (Drawn on Mandrel) to provide the closest dimensional tolerance and smooth Outside and Inside Finish. Further to achieve the desired Mechanical Properties the tubes are Heat Treated ( Normalized , Stress Relieved , Annealed , Tempered Etc ) as per the Customer Grade requirement. Straightening is done on Multiple Roll Straightening Machines to achieve accuracy up 1mm: 1000mm Straightness. Our stringent Quality checks and Best Packing practices (For Exports Special 4 Layer Packing) ensure that the material delivered to the customer is of the highest quality and reaches the destination in best condition.

• Material: Carbon Steel
• Shape: Round
• Thickness: 0.6mm to 80mm
• Color: Silver
• Feature: Fine Finishing, High Strength
• Size: 1/2 to 150mm Inch

We are offering boiler tubes. Standard: astm a192asme sa192 & astm a210asme sa210, bs 3059 part-ii bs 3059 part-i astm a 213 sa 213 size: od (10-219mm) x wt (1-40mm) application: seamless carbon steel alloy steel tubes seamless low tensile carbon steel tubes seamless carbon steel boiler tubes for high-pressure service and manufacturing high pressure boiler, wall panel, economizer, re-heater, super-heater and steam pipeline of boilers.

Boiler bank tubes connect Steam and Mud drums in a boiler. Natural circulation occurs with out the aid of any external down comers. Membrane division wall separates the boiler bank and the furnace. We manufacture Boiler bank tubes with or without fins. Special care is taken for ovality and thinning at the bent portion, during fabrication. These have the following features

Our Combination Type Evaporators are a uniquely designed and engineered systems to provide the solution for certain processes where viscosity and chemical property degradation play a vital role. These most economic evaporators utilize falling film tubulars or plates, with either thermal vapor recompression (TVR) or mechanical vapor recompression (MVR). However with many duties, the required concentration of the final product requires a viscosity that is too high for a film evaporator. The solution is to use film evaporation for the pre-concentration and then a forced circulation finisher evaporator to achieve the ultimate concentration; E.g.: a stillage or spent distillery wash evaporator. The material would typically be concentrated from 4% to 40% in a falling film evaporator and then from 40% to 50% in a forced circulation evaporator. Usually the finisher would be a completely separate evaporator since the finisher’s duty is usually relatively low. In the duty specified above, almost 98% of the evaporation would take place in the high efficiency film evaporator. For cases where the finisher’s load is relatively high, it is possible to incorporate the forced circulation finisher as one of the effects in a multi-effect evaporator. However this is an expensive proposition due to the low coefficients at the high concentration.

• Usage: Industrial

Other Specification Available :- BS 3059, ASTM A 53, API 5L, ST-52, ST-45.8, ASTM A 671 672 691 Boiler Tube in Gr. :- BS 3059, Gr. 360 440, SA ASTM A 210 Gr. A 1 (with IBR Test Certificate) Heat Exchanger Tube in Gr. :- SA ASTM A 179 192 210 214 Other Tubes :- Capillary, ERW CDW Boiler Tubes, Air Heater Tubes & Cold drawn Seamless Tubes. Special Tube :- Saw Pipes Tube & Steam Pipes, Precision Tubes, Fabricated Pipe (with radiography) In Form of :- Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, ‘U’ Shape, Hydraulic Tube & Horn Tube. In Length of :- Standard length, Double length & In Cut length also. Other Services :- Draw & Expansion as per required Size & Length, Heat Treatment, Bending, Galvanizing, Anneling & Pickled, Sand Blasting, Machining Etc. Test Certificate :- Manufacturer Test Certificate IBR Test Certificate (Form III-D) Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit. Specialize :- § In Odd Size. § Heat Exchanger & Condenser Tubes

hydraulic boiler pipes, Hydraulic Pipes, Mild Steel Pipes, Hydraulic Pipe

we are offering boiler tubes. the boiler tubes like ‘u’ bend tubes are used in various boilers. the boiler tubes are made of carbon steel & alloy steel and with the use of ‘u’ bending machines; the boiler machine tubes are made with precise dimensions. the inspection of the boiler tubes is done under third party agencies like dnv, sgs, bvis, gli, etc. the boiler tubes like u’ bend tubes are stress relieved / annealed according to the requirement of the client. highlights robust makecorrosion resistantresistant to temperature extremities highly durable specifications sa179, sa192, sa210, sa213 t11, t-12.t22, sa334, bs3059, din 17175, st35.8, 37.4, 45.8, 13 crmo44, 15mo 910, en10216, etc

Sainest Tubes Pvt. Ltd is a well known manufacturers & suppliers of high quality boiler tubes from India.

Boiler Tubes, Pipes, tubes, Fittings, Flanges, MS Pipes

Boiler Tubes, mild steel electric resistance welding, Pipes

Boiler Tubes, ms seamless pipe, Hydraulic, tc pipe ss scraps

steam piping, Boiler Economizer, Tubular Heat Exchanger

Hydraulic & Boiler Tubes, MS Rectangular Pipe, Boiler Tube

hydraulic heating exchange boiler tubes, Hydraulic Carbon Steel Tubes

Boiler Tubes, high pressure tubes, high temperature tubes

Boiler Tubes, Pipes, tubes, Fittings, Flanges, Tube Fittings

Boiler Tubes, Copper Pipe, copper tube, Flanges, Pipe Fittings, Pipes

Boiler Tube, Erw Seamless Pipe, Galvanized Pipe, Hydraulic Pipe

Boiler Tubes, Mild Steel Pipe, Welded Pipes, Hdpe Pipes

Boiler Tubes, Semi-Automatic Oilfield Equipments, Ram Blowout Preventers