Building Material Dealers in Gandhinagar Road, Ahmedabad

• Appearance / Colour: Hazy white to yellowish liquid
• Chemical Base: Modified Polycarboxylate
• pH Value: ≥ 6
• Dosage: 0.5 - 3.0% by weight of cement

Dubond Duplast WRH is a high range of water reducing cum plasticizing concrete admixture for promoting accelerated hardening and obtaining free flowing concrete specially for precast applications.   Uses   It has efficient dispersion and distribution of cement, additives and pigments   Improved movement of concrete through the machine   No adverse effect on ultimate strength   Sufficient water reduction   Improved water tightness   More economic concrete mix designs   Accelerated hardening & High early strength   Improved surface finish Areas of Application   Pre-stressed & Pre-cast concrete elements   Block Paving (Grey/Coloured)   Cement Tiles (Grey/Coloured)   Paving Flags   Edgings and other items for garden and landscape design   Building blocks & Bricks Application Duplast WRH can be added into the water or directly into the concrete mixer after 50 – 70% of the mixing water has been added The addition of Duplast WRH to dry aggregate/cement is not recommended To achieve optimum performance in a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended By use of Duplast WRH to produce highest quality of concrete Fresh concrete must be cured as per the relevant standard The standard rules of good concreting practice, concerning production, placing and testing are to be followed Clean all the tools and application equipment with water immediately after the use Hardened / cured material can only be mechanically removed Shelf Life 12 months from date of manufacturing if stored properly in dry conditions at temperatures between +10°C and +40°C.

• Form: Slab
• Material: Limestone
• Usage/Application: Flooring
• Thickness: 15-20 mm
• Surface Finish: Polished

\

Backed by a team of deft professionals, it has become easy for us to furnish divisive demands of the buyers and that too within shortest time possible. We are working in close coordination with the team members and management; they make every endeavor to keep the products piled up safely in our capacious warehouse. By this, we make deliveries in the committed time span.

• Application: Plumbing
• Features: Wear and tear, Longer service life, Light in weight
• Durability: Long Life
• Installation: Easy
• Warranty: 1 year
• Condition: New

• Material: Granite
• Application: Bathroom, Floor, Wall
• Thickness: 20-25mm
• Color: Red
• Pattern: Plain
• Texture: Solid
• Surface Finishing: Non Polished
• Feature: Crack Resistance, Washable

• Application: TILE ADHESIVE
• Brand Name: PEAK
• Raw Material: CEMENT
• Packing: 20 KG
• Main Raw Material: CEMENT
• Classification: Other Adhesives
• Usage: Construction
• Keywords: TILE ADHESIVE
• Name: PEAK TILE ADHESIVE
• Shelf life: 12 Months
• Place of Origin: Gujarat, India

• Country of Origin: India
• Thickness: 20-40mm
• Color: Brown
• Surface Finishing: Polished
• Specification: Antibacterial, Easy To Clean, Non Slip
• Material:: Sandstone

Silica Sand is an essential constituent in almost all kinds of glass. The Silica Sand that we deal in is 100% pure and free from unwanted substance. In order to meet the bulk orders of buyers, we maintain a huge stock of Silica in our state-of-the-art warehouse. Also, we are known for fair pricing policy. Based in Gujarat (India), we are the credible Exporter and Supplier of Silica Sand.   The main end uses of silica sand are : Glass - Silica is the major ingredient in virtually all types of glass. The principal glass products include containers (bottles and jars), flat glass (windows, mirrors, vehicle glazing etc.), lighting glass (light bulbs, fluorescent tubes, etc.), tableware (lead crystal, drinking glasses etc.), TV tubes and screens, decorative glass, fiberglass, optical glass and vacuum flasks. Foundry casting - Silica has a high melting point, 1610 degrees C. This enables castings to be produced by pouring molten metal into molds made out of silica sand. Ceramics - Silica that has been ground to fine size is an ingredient of most clay bodies and is a major constituent of ceramic glazes. Typical everyday products include tableware, sanitaryware, ornaments and wall and floor tiles. Filtration - Closely sized grades of silica sand is the principal filtration medium used by the water industry to extract solids from waste water. Specialist building applications the construction industry is founded on silica and there are a host of specialist applications including silica and aerated concrete blocks, floor and roof tiles, flooring and rendering compounds, white line markings, roofing felt and cement and resin injection systems. Sports and leisure - Silica sand is used for equestrian surfaces, in artificial turf, golf course root zones and dressings, football and cricket and other pitches and as play sands. Other users : Silica has many other applications including the manufacture of chemicals and metals, fillers in numerous products, plastic and otherwise, the manufacture of refractories, stimulating oil production and as additives in agricultural and horticultural products. It is difficult to imagine a life without silica!Production of silica sand. High grade silica sand is usually found as unconsolidated deposits below thin layers of soil and overburden. After quarrying, the sand often undergoes considerable processing before sale. The processing may include washing and cleaning of the grains, sizing to remove coarse and very fine fractions, and physical and chemical processes to remove iron, chromium and other deleterious minerals. After processing, the sand may be dried and some applications require it to be ground in ball mills to produce very fine material. Producer Representation : A constituent body of MPA, the Silica and Molding Sands Association (SAMSA) represents the interests of MPA's silica sand producers. Please contact SAMSA for further information. Please note this website is maintained to provide information and guidance on UK issues, products and applications of those products.Glass Silica Sand for the Glass Industry Glass makeing requires silica sand products that are free from contaminants, clear in color, consistent in grain size, and low in iron. U.S. Silica maintains strict quality procedures and specifications to improve the performance of your glass products - and to enable production efficiencies and cost savings that boost your bottom line. Glass Containers : Eight glass silica grades (sub-angular and round grains) and two Aplite grades Improved consistency through control of topsize, distribution and chemical properties Flat Glass : Five glass silica grades (sub-angular and round grains) and two Aplite grades High-quality optical properties from low iron sand Meets requirements for the automotive, commercial and residential construction, and solar application markets Reinforcement Fiberglass : Five ground silica grades that are inherently inert, white, bright, low-moisture and at least 99.5% Si02 Special processing techniques control particle size distribution to eliminate excessively coarse and fine particles Insulation Fiberglass : Sand and Aplite with consistent size and iron oxide content Allows manufacturing furnaces to run consistently, with minimal batch correction Specialty Glass : Range of low-iron and mid-iron silica grades, with several silica grades Fe2O3 below 150 ppm We work with customers to meet sand gradations for specialty borosilicate glass  U.S. Silica's ability to produce glass-grade products in a variety of locations enables us to supply what you need - every time you need it.Chemical Silica Sand for Silicon Based Chemicals : The silica-based chemicals industry relies on a strict set of standards, requiring products consistent in chemistry, quality and size distribution. U.S. Silica’s unique deposits and special processing methods help us meet the stringent physical and chemical properties your operations require. All silicon based chemicals - round and sub-angular grades in varying size distributions Sodium silicates - well-controlled chemistry, with particular monitoring and control of calcium and aluminum oxides Fused silica - well-controlled iron oxide, allowing manufacturers to produce crucibles with acceptable contaminant levels

• Type: Dust Pans
• Material: Silicon
• Diameter: 100-150, 200-250mm, 50-100mm, Mm150-200
• Certification: ISI Certified
• Application: Home
• Color: YELLOW
• Feature: Attractive Design, Heat Resistance
• Handle Material: Wooden
• Handle Length: 4inch, 5inch, 6inch, 8inch
• Fnishing: Coated, Non Coated
• Brand Name: Wonderchef
• Country of Origin: TANZANIA
• Shaping Mode: YES

• Feature: Superior Resistance to Temperature

This castables posses our brand name DI ALCAST - A and are manufactured using a high purity high alumina cement produced and marketed by us.The number in the brand name denotes the percentage of alumina content in these castables.

• Packaging Size: 50 kg
• Material: Epoxy
• Country of Origin: Made in India
• Brand Name: Mr Bond Polychem
• Usage/Application: Concrete Repair
• Coverage Area: 1 square metre
• Thickness: 4-5 mm
• Packaging Type: Carboy
• Features: Reliable, Precise pH value, Highly effective

• Type: Gypsum Stucco Plaster
• Weight: 10KG, 25KG, 2KG, 50KG, 5KG
• Shelf Life: 1yr, 6months
• Color: Off-white, White
• Purity: 80%, 90%, 99%
• Condition: Filtered, Raw
• Form: Powder
• Packaging Type: BOPP Bags, Plastic Packet

DuFill is a single part high degree of hardness, calibrated and smooth finish that is suitable for high resistance grouting from 1 mm to 12 mm on all horizontal and vertical surfaces with complete range of tiles and stone. It is thixotropic has a wide range of colors and finishes. The heavy research by engineers for innovations via market feed back has made Du Fill an architect's choice and user's pride.DuFill range of colours are developed to match all moods of colours band including classic Indian, Victorian, Contemporary.

Features • Excellent fluidity makes it easy to apply and clean • Available in different colours • Non-cracking • Rapid strength gain • High coverage area and economical to use   Applications • For non-vitreous clay tiles • For interiors as well as exteriors use • For marbles and glazed wall tiles

We offer an exclusive range of Decorative Tumbled Pebbles highly in demand for several decorative applications of landscape including homes, parks, aquaria and artistic monuments. Decorative Tumbled Pebbles are available in different colors and sizes to cater the diverse needs of our clients. Features Smooth textureAttractive looksDemanded for decorative applicationAvailable in different sizes

Crumb Rubber Modified Bitumen, Pyrolysis Plant 15 Ton, tyre recycling machine

• Feature: Accurate composition, Free from impurities ,Safely packed

We have complete allegiance in providing premium quality Raw Perlite. Owing to our client focused R & D activities we are able to procure most genuine grades of perlite from authentic sources. Demanded widely for manufacturing of refractory bricks, mortars and pipe insulation materials the offered product is available in raw form which is rigorously tested under certain quality parameters. Further, we have developed a state of art infrastructure and make sure to provide the highly demanded raw perlite in sterile packaging at the best price.

• Type: Sand
• Material: Silica, Stone
• Application: Construction, Glass Industry
• Color: Dark-grey
• Packaging Type: HDPE Bags, LDPE Bags, PP Bags
• Packaging Size: 25kg, 50kg, Loose

• Color: Blue
• Usage/Application: Decoration
• Gemstone Material: Stone
• Shape: Oval

Calcite chips is worshiped in many households to create positive and concentrated energy fields in the house during the auspicious occasion of Diwali. Installation and puja of Shree Yantra during Diwali is considered to be very effective.

• Packaging Size: 40 KG
• Application: For Construction Indusstry
• Brand Name: Pure
• Packing Type: PP Polybag
• WARRANTY: 15 Years

Non Asbestos Jointing Sheet, jointing rubber sheet, Asbestos

• Type: Natural
• Material: Quartz Stone
• Grade: Industrial Grade
• Color: White
• Finishing: Polished
• Form: Grits
• Whiteness: 99%

We are a main Manufacturer, Exporter and Supplier of the optimum quality Quartz in India. We procure the Quartz from the reliable manufacturers and dealers in the market. The Quartz that we provide is of international standard. It finds application across several industries due to its high quality and great performance.   Applications Glazes Ceramic colors Fiber glass Compound-engineered stone and so on   Features Optimum silica purity Very less amount of iron Great whiteness High contents Silica Excellent physical and chemical Cost effective Makes material free contaminations

• Usage/Application: Commercial, Water Filter Media
• Filter Type: Requires for Sand, Carbon, Multigrade Filter
• Brand Name: Shreyans 
• Size: 15 mm to 50 mm
• Density: 2.6 g/cm3
• Volume Weight: 1.85 g/cm3
• Shape: Elliptical
• Packing Type: Bag
• Pack Size: 50 Kg

Epoxy Grout, 5 kg kit, colour white  Price - $35 per kit  MOQ - 1 pallet  Delivery days - 10 days