Double Shielded Twisted Pair Cable Dealers in Ahmedabad

• Available sizes: 0.5 to 1.5 Sq.mm up to 30 core.

RR KABEL brand shielded cable used in various type of instruments.  

• Conductor Material: Copper
• Type: HT Power Cable
• Conductor Size: 180 sq mm
• Insulation: PVC
• Conductor Stranding: Multistranded
• Armour Material: GI Steel

• Conductor Material: Copper
• Brand: Vision
• Packaging Type: Roll
• Insulated Material: PVC
• Conductor Size: 0.25 Sq mm to 50 Sq mm

Industrial applications such as factory floor are typically electrically noisy environments. Electrical noise either radiated or conducted as electromagnetic interference (EMI), can seriously disrupt the proper operation of other equipment. Shielding is needed to combat the effects of EMI. The shield can act on EMI on two ways. First it can reflect the energy. Second, it can pick up the noise and conduct it to ground. In either case, EMI does not reach the conductors. Braid is a woven mesh of bare or tinned copper wires. The braid provides a low resistance path to ground and is much easier to termination by crimping or soldering when attaching a connector. The braid is more effective as a shield.

• Red: White

we are offering multicore shielded cables. shielded cables multicore flexible shielded cables core colours : upto 4 cores, black with white numbering + yellowgreen sheath colour : grey, black and white conductor : annealed bare copper as per is 8130 insulating pvc : type a conforming to is 5831 shield : aluminium mylar taped wrapped, over all laid up cores alongwith annealed tinned copper drain wire. in case of multipairs multitriads individual pairtriad is wrapped with aluminium mylar tape alongwith drain wire and identification of pairtriad is done by numbered black core. pvc sheath : type st-1 conforming to is 5831. hr, fr and frls sheathing can be provided as per requirement. rated voltage : 300500 v test voltage : 1000 v a.c. for 1 minutes. min. bending radius : 6 times the overall diameter of cable tensile strength : 12.50 n per sq. mm of pvc insulation and sheath max. working temp. : 700c, also available for 850c and 1050c as per requirement. max. short circuit temp. : 160â°c minimum laying temp. : -15â°c application : is suitable for interconnection of electrical measuring devices to instrument panel or instrument. measuring, monitoring and control in machine tool manufacturing, in plant engineering, in all places where electrical interference fields can distort a signal transmission or where interference pulses arising in the mains must be confined. note: rr kabel will not be liable for damages arising due to incorrect installations. the above data is indicative and may be revised without prior intimation.

SD CABLE INDUSTRIES PVT LTD. design and develop a wide assortment of Shielded cables, that are provided with both copper braided and aluminum Mylar with 0.5 sq mm Annealed Tin Copper drain wire to cater to the industry as per the specific demand of our clients. Shielding plays a major role in the protection of the signal from external interface.

• Type: Shielded Cables

• wire: bare copper
• Insulation: PVC outer sheath
• Cores: twisted in layers
• Test voltage: 4000V

Shielded Cable Wires, PVC Insulated Aluminum Cable, Elevator Cable

shielded wire, TransAir Reversible fan, Brisk Air, Wind Flo (Hi-Speed)

• Green: Red
• Blue: Yellow
• Brand Name: R R Kabel

We are offering shielded cable. Constuction conductor : annealed copper wires according to class 1 or 2 or 5 of bs en 60228 insulation : pvc types ti51 according to bs en 50290-2-21 pairs - twisted identification pairs : blue & white. Blue cores indicate pair identification. assembly : concentric layers outer sheath : pvc type tm51 according to bs en 50290-2-22 marking : rr kabel n x m x csa 300500 v pas 5308-part 2 application : pas 5308-2 design guidelines standards : ec 60332-1 flame retardant shielded cables are used in security systems as it provides protection from power frequency and radio frequency interference, thus, reducing the number of false alarms being generated. For its optimum use it necessary to keep the data or signal cables physically separated by at least 3 inches (75 mm) from 'heavy' power circuits which are in parallel.

pvc shielded screen wires, Cable Jointing Kit, Terminal Block Pluggable Plug

Multicore Shielded Cables, databus cable, Ptfe Equipment Wires

Dual Shielded Outdoor SFTP Cat 5 LAN Cable, MS DVR Rack, Wall Mount DVR Rack

Shielded Cables, Hybrid Flat Elevator Cable, co-axial cables, Coaxial Cables

SCREENED SHIELDED CABLES, COPPER FIXABLE HOUSE WIRE, HT ALUMINUM CABLE

Double Shield VGA Cable, Cat5E Mold-Injection Patch Cable