Back Back
Worm Gear Actuator
Features: -> Small in volume, light weight, reasonable design and novel pattern. It consists of a series of products, so output torque matches with all kinds of Pneumatic devices and valves. -> There are two keyway apart 90° in the inner hole of worm gear so as to be convenient for customer to choose relative position between gear operator and valve -> Pull out the position pin and rotate off center device with 180° to realize pneumatic drive by positioning pin acted or to realize manual drive in the opposite way. -> The gear operator is filled with special lubricant before leaving lubricant before leaving the factory. It is solid sealed with valve after installation possessing dustproof and waterproof function with protecting grade IP65. Operater Instruction: The bottom of gear operator should be connected with valve, racket surface connected with cylinder, valve stem go through the inner hole of worm gear and the square on the end of stem matches with square hole of cylinder. Working procedures: The cylinder drives valve stem and worm gear rotating together when pneumatic drive and worm shaft meshes with worm gear to drive valve stem rotating along with piston of cylinder moving when manual drive. When pneumatic drive, pull out the pneumatic drive by worm gear rotating following with pneumatic valve stem. Just make the worm shaft mesh to realize manual drive. No mesh may occur when move handle toward outside by 180° and close the worm shaft, please rotate hand-wheel by an angle to move it. Three types of bracket are available so that customers to match with different cylinder as need. It can not be operated by pneumatic and manual drive can choose from them at the same time.
...more
Electric Actuator V - Notch Design Ball Valve
The company has segregated its infrastructure into several units and one of them is packaging unit wherein we meticulously pack our products for ensuring safe and secure deliveries. We are a customer-focused firm and bring a solution that makes us capable to make safe and secure payments. Also, our payment procedure is verified and approved by the authority. Electrical Actuator Details: Manufacturer- Cair Euromatic Automation Pvt. Ltd. Brand / Model- Cair / Mod Approvals- Design (Tuv) / Iso 9001:2008 / Ce / Iec Characteristic - On - Off Type / Modulating Type Travel Angle- 90 Degree Indicator- Continuous Position Indicator Supply - 220v Ac , 50 Hz Body Material- Aluminum Alloy Ambient Temperature - -10°c ~ 55°c Motor Insulation - Class F Protection Class - Ip 67 – Weather Proof Limit Switch- 1 No + 1 No Output Of 220v Ac Position On Power Fail - Stay Put Manual Override - Provided Details Size - ½” to 16” MOC - WCB / CF8 / CF8M Seals - PTFE / CFT/ GFT/TFM/ PEEK Pressure - 150# / 300# Temp - Upto 180°C / 250°C Class - 150# / 300# Ends - Flanged End
...more
Triple Offset Butterfly Valve
1 Piece(s) (MOQ)
We are offering triple offset butterfly valve. "cair" offers 220v ac single phase rotary electrical actuator operated offset disc design double flanged triple offset butterfly valve. Electrical actuator details: brand: cair model: mod - atq characteristic: on - off type travel: 90 degree indicator: continuous position indicator phase: single phase three phase power supply: 220v ac, 50 hz 415 v ac body material: aluminum alloy ambient temperature: -20°c ~ 80°c motor insulation: class f protection class: ip 67 - weather proof limit switch: 1no + 1nc output of 220v ac position on power fail: stay put manual override: provided accessories: modulating controller: input signal 4 ~ 20ma potentiometer feedback integral starter unit control panel size range: 40 mm to 1800mm butterfly valve details: construction type: double triple offset disc design body: wcb ss 304 ss 316 ss 304l ss 316l disc: wcb ss 304 ss 316 ss 304l ss 316l seat: metal shaft: aisi 410 ss 304 ss 316 plate mounting: namur standard pressure rating: 150# end connection: wafer type operation: motor operated fire safe butterfly valves available on request key features: light weight pressure range multiple operation easy maintenance
...more
Three Phase Quarter Turn Electrical Actuator
Three Phase Quarter Turn Electrical Actuator we manufacture and export finds extensive usage in the Power Plant, Water Treatment System, Metallurgy, Petroleum Industry, Chemical Industry, Pharmacy, Paper Industry, Textile Industry, Food Processing, Building Automation, etc. Features : Torque : 30 Nm to 12000 Nm Electric Actuators on 100 Nm and above are installed with torque switches for over-load protection Standard enclosure to water jet proof will water tight proof IP 67 Squirrel cage motor is of encapsulated type, on high stall torque and low inherent force for seating & unseating of valves All motors are integrated with build-in thermal protection The unique cam plate design does not allow over travel of limit switches A pair of limit switches are activated by means of simple, reliable & adjustable cam plates, mounted directly and driven by center column Various Options : Potentiometer Feedback Additional Limit Switches (2 Units) Modulating / Regulating Type On Off Type On Off Type with integral starter unit Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC Standard Voltage : 415V AC 230V AC 24V DC
Type : Electric Actuators
Material : Aluminum
Application : Industrial
Color : Yellow
Pattern : Plain
Pressure : High Pressure, Low Pressure, Medium Pressure
Port Size : 1.1/2inch, 1.1/4inch, 1/2inch, 3/4inch
...more
Three Phase Multi Turn Electric Actuator
Avail from us Three Phase Multi Turn Electrical Actuator which is suitable for the production of Knife Gate Valve, Gate Valve and Sluice Valve. The Three Phase Multi Turn Electrical Actuator we offer is in high demand for use in Power Plant, Water Treatment System, Petroleum Industry, Metallurgy, Chemical Industry, Pharmacy, Paper Industry, Food Processing, Textile Industry, Building Automation, etc. We make available the Three Phase Multi Turn Electrical Actuator at rock bottom prices. Features : Torque : 100 Nm to 2400 Nm Easy mounting, transmitting with equilibrium and low failure rate All joints are armed with waterproofing seal (IP 67) which is suitable for outdoor use Thermo switches embedded in motor winding of actuator will disconnect motor on over heating and protect for burning Basic version with integral starters with modulating controller, remote sensor operated intelligent series Long valve life via soft start up and gradual closing It adopts gear group with small modules fitting which can indicate accurate position of actuators Torque switch will stop the motor automatically in case of over torque in the valve Various Options : Potentiometer Feedback Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC On Off Type On Off Type with integral starter unit Standard Voltage : 415V AC Three Phase
Type : Electric Actuators
Material : Aluminum
Application : Gas Valve, HVAC System, Liquid Valve
Color : Available in Many Colors
Pattern : Plain
Power : Electronic
Pressure : High Pressure, Low Pressure, Medium Pressure
Port Size : 1.1/2inch, 1.1/4inch
...more
Three Phase Motorized 3 Way Ball Valve
01 Piece(s) (MOQ)
We offer motorized ball valve. "Cair" Manufactures On – Off Duty 415V AC Three Phase Quarter Turn Electrical Actuator Operated 3 way Ball Valve Electrical Actuator Details: Manufacturer: Cair Euromatic Automation Brand: Cair Model: ATQ Basic Characteristic: On – Off Type Travel: Quarter Turn Rotary 90 Degree Power Supply: 415V AC Housing: Aluminium Die Cast Cover: Aluminium Die Cast Enclosure: IP 67 Weather Proof Actuator Torque Switches: Provided Limit Switches: Provided Stall Protection: Built-In Thermal Protection Position Indicator: Continuous Needle Type Position Indicator Manual Override: Wheel Type Various Options: • On - Off Basic Type • On - Off With Integral Starter Unit • Modulating Type • Modulating Type with Integral Starter Unit • Potentiometer Feedback • With Panel Mounted Starter Unit Controller 3 Way Ball Valve Details: Body: WCB / SS 304 / SS 316 Ball: SS 304 / SS 316 / Monel Stem: AISI 410 / SS 304 / SS 316 / Monel Seat: PTFE For more details please feel free to contact us.
...more
Three Phase Motorized 2 Way Ball Valve
01 Piece(s) (MOQ)
manufactures on – off duty 415v ac three phase quarter turn electrical actuator operated 2 piece design 2 way ball valve electrical actuator details: manufacturer: cair euromatic automation brand: cair model: atq basic characteristic: on – off type travel: quarter turn rotary 90 degree power supply: 415v ac housing: aluminium die cast cover: aluminium die cast enclosure: ip 67 weather proof actuator torque switches: provided limit switches: provided stall protection: built-in thermal protection position indicator: continuous needle type position indicator manual override: wheel type various options: • on - off basic type • on - off with integral starter unit • modulating type • modulating type with integral starter unit • potentiometer feedback • with panel mounted starter unit controller ball valve details: body: wcb / ss 304 / ss 316 ball: ss 304 / ss 316 / monel stem: aisi 410 / ss 304 / ss 316 / monel seat: ptfe for more details please feel free to contact us.
Design : Fire Safe
...more
Three Phase Electrical Actuator - Rotary
Enclosure: -> Standard enclosure to water jet proof will water tight proof IP 67.NEMA 4&6 Motor: -> Squirrel cage motor is of encapsulated type, on high stall torque and low inherent force for seating & unseating of valves. All motors are integrated with build-in thermal protection. Terminal Connection & Wiring: -> Terminal connections are of "WAGO" push on type, making wiring connection very easy & without fuss. Electrical wiring circuit is standardized for single & three phase voltage. Addition termination is available on request. Internal Components Arrangement: -> Internal mechanical and electrical components are design in modular mounting arrangement, and can be easily remove for maintenance purposes. Additional optional accessories are also possible. Limit Switches: -> A pair of limit switches are activated by means of simple, reliable & adjustable cam plates, mounted directly onto, and driven by center column. The unique cam plate design does not allow over travel of limit switches. Torque Switches: -> Electric actuators on 100 N • m and above, are install with torque switches for over-load protection. Heater: -> For prevention of condensation due to weather& temperature changes, an d also keeps internal components clean & dry, a 20 Walt space heater is provided inside all the electric actuators. Self Locking Mechanism: -> Because of the worm gear design system, all the electric actuators are self-locking. Handwheel: -> Correct size of handwheel on the electric actuator ensure adequate strength for safe and efficient emergency operation. Manual Over-Ride: -> Engage by pulling the lever & turning the handwheel. Lever is auto declutch when power supply is switch on, and hand wheel does not turn as extra safety feature. Visual Position Indicator: -> The visual position indicator is directly mounted onto the center drive column to provide the visual position of the valve.
...more
Three Phase Actuator Operated Butterfly Valve - Atq
01 Piece(s) (MOQ)
"cair" manufactures on – off duty 415v ac three phase quarter turn rotary electrical actuator operated wafer type rubber lined butterfly valve for water and air application. electrical actuator details: manufacturer: cair euromatic automation brand: cair model: atq basic characteristic: on – off type travel: quarter turn rotary 90 degree power supply: 415v ac housing: aluminium die cast cover: aluminium die cast enclosure: ip 67 weather proof actuator torque switches: provided limit switches: provided stall protection: built-in thermal protection position indicator: continuous needle type position indicator manual override: wheel type various options: • on - off basic type • on - off with integral starter unit • modulating type • modulating type with integral starter unit • potentiometer feedback • with panel mounted starter unit controller butterfly valve details: valve design: wafer type butterfly valve body: cast iron / ductile iron / wcb / ss 304 / ss 316 disc: cast iron / ductile iron / wcb / ss 304 / ss 316 stem: aisi ss 304 / aisi ss 316 seat: nitrile / epdm / ptfe / viton / gft ends: wafer to suit 150# working pressure: up to 10 kg/cm²
...more
Three Phase Actuator Operated Butterfly Valve
01 Piece(s) (MOQ)
"Cair" Manufactures On – Off Duty 415V AC Three Phase Quarter Turn Rotary Actuator Operated wafer type rubber lined butterfly valve. Electrical Actuator Details: Manufacturer: Cair Euromatic Automation Brand: Cair Model: ATQ Basic Characteristic: On – Off Type Travel: Quarter Turn Rotary 90 Degree Power Supply: 415V AC Housing: Aluminium Die Cast Cover: Aluminium Die Cast Enclosure: IP 67 Weather Proof Actuator Torque Switches: Provided Limit Switches: Provided Stall Protection: Built-In Thermal Protection Position Indicator: Continuous Needle Type Position Indicator Manual Override: Wheel Type Various Options: • On - Off Basic Type • On - Off With Integral Starter Unit • Modulating Type • Modulating Type with Integral Starter Unit • Potentiometer Feedback • With Panel Mounted Starter Unit Controller Butterfly Valve Details: Valve Design: Wafer Type Butterfly Valve Body: Cast Iron / Ductile Iron / WCB / SS 304 / SS 316 Disc: Cast Iron / Ductile Iron / WCB / SS 304 / SS 316 Stem: AISI SS 304 / AISI SS 316 Seat: Nitrile / EPDM / PTFE / VITON / GFT Ends: Wafer to suit 150# Working Pressure: Up to 10 Kg/Cm²
...more
Thermic Fluid Valve
01 Piece(s) (MOQ)
We offer Control Valve. Cair manufactures on - off type 220v ac single phase linear electrical actuator operated 2 way globe type control valve for thermic fluid application electrical actuator details manufacturer: cair euromatic automation brand: cair model: vo basic characteristic: on - off type travel: linear indicator: continuous position indicator phase: single phase supply: 220v ac body material: aluminium alloy ambient temperature: 20 ~ 80 degree c motor insulation: class f protection class: ip 65 weather proof limit switch: 1no + 1nc type position on power supply: stay put manual override: wheel type` 2 way globe control valve body: astm a216 gr. Wcb trims: 13 cr. Ends: flanged end 150# bonnet: standard packing: graphoil temperature: 450°c leakage class: class iv working pressure: up to 10kg/cm characteristic: linear on – off application: motor operated valve mov
...more
Temperature Control Valves
1 Piece(s) (MOQ)
We are offering actuated temperature control valves. overview cair model-cw, 3-way temperature control valves provide a high degree of accuracy and repeatability for accurate temperature control and are also used in mixing or diverting service over a wide flow range. features and benefits • easy to integrate - valve size matches pipe size • flexible design - ports can be configurd to suite installation • simplified set up and maintenance - hand wheel allows manual adjustment of valve (optional on pneumatic valve) applications for engines, turbines, gearboxes and heat exchangers: • charge air cooling • secondary cooling systems • fuel and lube oil preheating • co-generation • engine jacket water • for refineries, chemical plants and oil reporduction: • waste heat boilers • product coolers • product heaters • product condensers
...more
Steam Control Valve
01 Piece(s) (MOQ)
We offer motorised control valve.
Spring Return Damper Electrical Actuator
01 Piece(s) (MOQ)
"Cair" Manufactures On - Off Type 220V AC Single Phase Spring Return Damper Electrical Actuator Spring Return Actuator Details: Manufacturer: Cair Euromatic Automation Brand: Cair Model: RSD Characteristic: On - Off Type Power Supply: 220V AC Variation: ± 10% Running Time for Open: 60 Seconds Running Time for Close: 25 Seconds Power Consumption: 6 to 8 VA Output Angle: 90 Degree Overload Protection: Automatic Protection Class: IP 54 Noise Level: 40 dB(A)
Type : Spring Return
...more
smart positioner
General: APP8000 Serial smart valve positioner is designed to operate rotary or linear pneumatic valve actuator. Through the pneumatic actuator, the positioner control the valve to the required position when collecting standard electrical current signal or computer signal. This smart valve positioner includes piezo & pilot valve, inductive position sensor and control CPU etc. By using advanced piezo valve and pilot valve of HOERBIGER-ORIGA company as pneumatic driver sets, the response time of piezo valve is under 2ms while pilot valve response time bellows 20ms, which could ensure the valve a very high adjusting precise and short response time. As the positioner do not need air itself, when the valve reach the required position, the air consumption could even be overlooked. Principle: The principle is different from the traditional electro-pneumatic valve positioners which use nozzle flapper structure. Advanced PID fuzzy control software in the CPU, auto adapting parameter of PID, it makes the control fast, steady and exact (Fig.1).32 letter LCD version and four push buttons meet all the requirements of parameters input, zero and span adjusting or split range. The valve position adjusting could be done without any other instruments at the working place. Auto Calibration: The smart valve positioner is combined with the function of digit valve controller and performance monitor. Features: -> Smart valve positioner uses two wire lines. It takes 4-20mA input signal as its power, signal drop voltage is 9.2 equal to load resistance 46017. -> 4-20mA feedback module and limit switch module is optional. Freely set alarm value and output status of limit switch. -> The pressure sensor with optional measuring diaphragm can run self-diagnoses according its history record. Self-diagnoses includes: pressure air stopped, valve locked, positioner failure, valve posited time, diaphragm or cylinder air leaking, packing abrasion and ventileinheit abrasion etc. -> 4-12mA and 12-20mA split range. -> Adjustable sensitivity. -> It is available to choose the output characteristics, such as linear, equal percentage, quick open and user defined. -> Low power consumption, low air consumption and running cost. Piezo valve control, the positioner do not consume air itself, when the valve reach the required position, the air consumption could even be overlooked(it can save more money than traditional valve positioner). -> High sensitivity, high precision and short response time. -> 32 letters LCD, clear showing. -> Module designing, compact and reliable.
Material : Aluminum alloy
Weight : 1.8kg
...more
Single Phase Quarter Turn Electrical Actuator
We make available the Single Phase Quarter Turn Electrical Actuator used for the fabrication of Valves. The Electrical Actuator we offer is widely used in the Chemical Industry, Petroleum Industry, Paper Industry, Power Plant, Metallurgy, Pharmacy, Water Treatment System, Textile Industry, Food Processing, Building Automation etc. We are a reputed Single Phase Quarter Turn Electrical Actuator Manufacturer and Exporter based in India. Features : Torque : 15 Nm to 4000 Nm Made of Aluminum Alloy Resistant to heat, acid and alkali It is water proof and dust proof High efficiency, low power consumption and outstanding weatherproof heavy duty motor Steady start tempo for efficiently avoiding water hammering to extend the service of life tubes All the joint are armed with waterproofing seal (IP 67) Continuous mechanism position indication Low noise level Built in thermal protection which checks the motor from burning out Auto declutch wheel type manual override Sophisticated design manual override without any clutch to protect the user from injury (Model: MOD 3-1 to MOD 12) Various Options : On Off Type Integral Starter Unit On Off Type Potentiometer Feedback Modulating / Regulating Type Additional Limit Switches (2 Units) Signal Input : 4 ~ 20 mA / 1 ~ 5v DC / 2 ~ 10V DC Standard Voltage : 24V DC 220V AC 110V AC
Type : Electric Actuators
Material : Carbon Steel
Application : Gas Valve, HVAC System, Liquid Valve
Color : Yellow
Pattern : Plain
Power : Electronic
Pressure : High Pressure, Low Pressure, Medium Pressure
...more
Single Phase Electrical Actuator - Rotary
Features: -> Low Power Consumption, high efficiency and excellent weatherproof heavy-duty motor. -> All the joint on the housing are armed with waterproofing seal (IP67), which is appropriate for use in outdoor environment. -> Stabilized start speed to effectively avoid water hammering to prolonge the service of life tubes. -> Continuous mechanism position indication. -> Low noise level. -> Built - in Thermal Protection which prevent motor burning out. -> Auto declutch type manual override. (Model : MOD - 2-1 & 3-1, to MOD -12). Standard Voltage: -> 220V AC~240V AC. -> 110V AC, 380V AC & 24V DC available on request. Various Options: -> ONOFF Type-220V AC. -> Modulating Controller. -> Signal input - 4 ~ 20mA1 ~ 5V DC 2 ~ 10V DC. -> Potentiometer Feedback. -> Additional Limit Switches (2 Units). Enclosure: -> IP67 waterproof and dust - proof enclosure. -> Made of "AA" (NYLON) or Aluminum Alloy which can resist against heat, acid, alkali, waterproof, dust proof. Caution: -> Keep electrical actuator away from the area using gas or chemical substance which is vulnerable to gas explosion to avoid the occurrence of hazard. -> Be sure to check Voltage and Wiring is correct. -> Adjust valve position, open cover then adjust the CAM (Hexagonal head wrench 2.5H.) After complete adjustment, be sure to tighten the screw securely. -> Prohibit to drive the valve, when the valve is locked. -> Do not use Electric Actuator in Vacuum's chamber.
...more
Single Phase Electrical Actuator - Linear
Feature: -> Torque : 150 kgf to 1000 kgf -> Actuator are designed with linear output giving high thrust All the joints on the housing are armed with waterproofing seal (IP 67) which is appropriate for use in outdoor environment -> Spilt phase reversible capacitor start-run motor having magnetic rotor acts as a prime mover -> Manual operation facility is provided to operate valve In case of power failure or during installation of actuator on valve Various Options: -> ONOFF Type -> Modulating Control. -> Signal tnput - 4 - 20mA 1 - 5V DC 2 - 10V DC. -> Potentiometer Feedback. -> Additional Limit Switches (2 Units). Standard Voltage: ->220 VAC - 240 VAC-Single Phase Application: -> Widely used in the fields such as petroleum, Chemical Industry, Power plant. Metallurgy, Pharmacy, Paper Industry Energy, Water treatment vessel. Textile, Food processing Building, Automation, Thermic Fluid lines for furnace & Steam boilers
...more
Motorized Rubber Lined Butterfly Valves
Motorized Rubber Lined Butterfly Valves that we provide in the markets are widely acknowledged by the clients spread all across the globe. Motorized Rubber Lined Butterfly Valves are extensively used for HVAS & utilities. Minimal maintenance, trouble free functioning, compact design and light weight are some of the unique features of Motorized Rubber Lined Butterfly Valves we manufacture. About Motorized Rubber Lined Butterfly Valves : Made available in an integrally moulded version Body lines functions as the soft seat Provides bi-directional sealing against vacuum upto the pressure of PN 10/PN 16 Electrical Actuator Details Manufacturer Cair Euromatic Automation Brand / Model Cair / MOD Characteristic On - Off Type Travel 90 Degree Indicator Continuous Position Indicator Phase Single Phase Power Supply 220V AC, 50 Hz Body Material Aluminum Alloy Ambient Temperature 20oC ~ 80oC Motor Insulation Class F Protection Class IP - 67 Weather Proof Manual Adjustment Wrench Setting Limit Switch 1NO + 1NC output of 220V AC Position Power Failure Stay Put Manual Override Provided Accessories Modulating Controller 4 ~ 20 mA (Available on request) Potentiometer Feedback Available on request Integral Starter unit Available on request Control Panel Available on request Size Range : 1.1/2" To 72" Technical Specifications Body Cl (IS 210 Gr. FG 200 / 220) / WCB Disc CF8 / CF8M /CF3M/S.G.Iron/ Teflon Coated/ Power Coated / Naylon Coated Seat EPDM / Nitrile/ Naylon / Hayplon / Viton Shaft AISI 410 Valve Type Centric Disc Butterfly Valve with a Single Piece Rubber Lined Body Body Type Short Wafer (Sandwiched Between Flanges) Seat Type Integrally Moulded with the Body End Connection Wafer Sandwiched (Lug Type On Request) Pressure rating PN 10 /PN 16 (On Request) Oper. Temp, range -25oC to 130oC (Depending on MOC) Protection Class Tight Shut Off Operation Hand Lever for Sizes from 40 NB to 300 NBWorm Gear Boxes for 200 NB to 500 NB Key Features : Integrally moulded seat liner on the body, which ensures excellent dimensional stability & guaranteed seat tightness. Seat liner extending on to the contact faces ensures perfect sealing and eliminates the need for separate flange gaskets. Narrow land disc ensures perfect sealing with least operating torque requirements. A fully universal body design ensures fitting of the valve between companion flanges of all popular standards (viz : ANSI, BS, DIN, JIS, IS etc.) The notch disc & band lever ensures locking of the valve in 8 intermediate position in addition to close and open position. Hand lever can be locked through pad lock. Body castings made of superior FG 260 grade cast iron to ensure additional strength. Valve disc made of stainless steel / ductile cast iron which enable protection against possible water hammer or pressure surges. A truly line size body bone to ensure maximum flow capacity with the lowest pressure drop. Standards Design and Manufacturing API 609 category A/BS 5155 / MSS SP-67 / C-504 Valve Face to Face Dimensions Short wafer as per ISO 5752 Tab 5 / API 609 Category A Top Flange Drilling ISO 5211 Part II Inspection and Testing API 598 / BS 6755 Flange Standard Conformity ANSI150, DINPN6/10.JIS5K/ 10KBS10TabD&E, IS 6392 NP 0.6/1.0 Size Range : 1.1/2" to 72" Flanged
...more
Rotork Type Multi Turn Electrical Actuator
1 Piece(s) (MOQ)
"cair" offers ce approved multi turn electrical actuator operate gate valve. electrical actuator details: manufacturer: cair euromatic automation brand: cair model: atm characteristic: on - off type power supply: 415v ac housing & cover: cast iron enclosure: water tight ip 67 ambient temperature: -30°c ~ 70°c torque switches: 2 x spdt limit switches: 2 x spdt stall protection: built-in thermal protection indicator: continuous position indicator manual override: wheel type accessories: modulating / regulating type input signal: 4 ~ 20 ma potentiometer feedback integral starter unit control panel gate valve details: size range: 1" to 40" body: cast iron / wcb / ss 304 / ss 316 bonnet: cast iron / wcb / ss 304 / ss 316 trims: 13 cr. Manufacturing std: api 600 inspection std: api 598 ends: flanged end / butt weld end / socket weld end {for any special requirement please contact to us} other information pay mode terms: t/t (bank transfer) delivery time: ready stock / depend upon quantity packaging details: standard
...more
Rotary Electrical Actuator
“cair” offers on - off type 220v ac single phase quarter turn electrical actuator for quarter turn valves and engineering use. features: torque: 15 nm to 4000 nm made of aluminum alloy which can resist against heat, acid , alkali, water proof, dust proof. low power consumption, high efficiency and excellent weatherproof heavy duty motor. stabilized start speed to effectively avoid water hammering to prolonged the service of life tubes. advanced design manual override without any clutch to prevent user from injury. all the joint on the housing are armed with waterproofing seal (ip 67), which is appreciate for use in outdoor environment. continuous mechanism position indication. low noise level. built – in thermal protection which prevent motor burning out. auto declutch wheel type manual override. (model: mod 3-1 to mod 12) various options: on – off type modulating type signal input: 4 ~ 20 ma 1 ~ 5v dc 2 ~ 10v dc potentiometer feedback additional limit switches (2 units) standard voltage: 220v ac 110v ac – available on request 24v dc - available on request application: widely used in the fields such as petroleum, chemical industry, power plant, metallurgy, pharmacy, paper industry, water treatment system, textile industry, food processing, building automation etc…
...more
Rotary Actuators
1 Piece(s) (MOQ)
We supply all type of rotary actuator valves electric actuated ball valve, electric actuated valve, electric actuator butterfly valve, electric actuator motor valves, electric actuator valves, electric ball valve, electric butterfly valve, electric control valve, electric flow control valve, electric gate valve, electric magnetic valves, electric modulating valve, electric operated butterfly valve, electric operated valves, electric solenoid valves, electric thermal valves, electric valve, electric water valve, electrical actuated gate valve, electrical change over valve, electrically actuated valves, electrically operated ball valve, electrically operated butterfly valves, electrically operated sluice valve, electro pneumatic ball valves, electro proportional valves, electro valves, motorised butterfly valve ,motorised control valves, motorised damper valve, motorised valves, motorized actuated ball valve, motorized air butterfly valves, motorized ball valve, motorized butterfly valve, motorized control valves, motorized damper valves, motorized gate valve, motorized knife gate valves, motorized sluice valve, motorized valve mounted ball valve.
Color : orange
...more
Resilient Seated Gate Valve
5,000 Per Piece
Resilient Seated Gate Valve RESILIENT SEATED GATE VALVE BS5163 | NON RISING STEM DOUBLE FLANGE CONNECTION(Brass nut type) Design Features | Resilient Seated Gate Valve Design comply to EN1171 / EN1074 / BS5163 Flanges are drilled to EN 1092-2 / BS4504 Pressure Rate: PN10/16, (PN25 for DN40-200) Test: Body test 1.5 x PN, Seal test 1.1 x P Medium: Neutral water, Drinking water, Sewage Rolled thread ensure smooth thread edgesand low operating torques Bonnet bolts are in Galvanized carbon steelSS304 upon request o-rihen valve fully opened. Thrust washer - Brass material, to get more reliable strength and long service life when comparing to other factory's nylon material. Body/bonnet connection Bonnet gasket fits into a recess in valve bonnet preventing it from being blown out by pressure surges. Wedge nut - made of copper alloy with lubricating ability providing optimum compatibility with the S.S. stem. Bolts sealed with hot met Lifting rings Operation: Handwheel Square cap Gearbox, Actuator Manufacturing standard meets BS EN 1074, B S 5163. Both inside & outside coated with epoxy resin powder. Standard color similar to RAL5005 other colors upon request. With rubber dust cover O-ring bonnet gasket wraps each bolt to prevent corrosion.Completely free and full bore self clearning & low pressure loss. Clockwise closing (CWC) as standard. Sealing: Class A (zero leakage 100% testing before delivery Cair Euromatic Automation Pvt. Ltd. ITEM PART NAME MATERIAL 1 Body GGG50 2 Disc EPDM+DI 3 Bonnet Gasket NBR 4 Stem SS420 5 BonnetGGG50
Brand Name : Cair
Application : water
Pressure : 10kg
Temperature Of Media : water
...more
Pump Testing Machine
01 Piece (MOQ)
We offers CE Approved Single Phase Rotary Electrical Actuator operated Invesment Casting Ball Valve in three piece design for multiple on-off operation in the dawn stream. Electrical Actuator Details: Manufacturer: Cair Euromatic Automation Brand / Model: Cair / MOD APPROVALS : DESIGN (TUV) / ISO 9001:2008 / CE / IEC Characteristic: On - Off Type Travel: 90 Degree Indicator: Continuous Position Indicator Phase: Single Phase Power Supply: 220V AC, 50 Hz Body Material: Aluminum Alloy Ambient Temperature: 20°C ~ 80°C Motor Insulation: Class F Protection Class: IP 67 Weather Proof Manual Adjustment: Wrench Setting Limit Switch: 1NO + 1NC output of 220V AC Position on Power Fail: Stay Put Manual Override: Provided Accessories: Modulating / Regulating Type Signal Input: 4 ~ 20 mA Potentiometer Feedback Integral Starter Unit Control Panel Spring Return Type with Battery Back-up System Size Range: 1/2" to 4" Screwed End Size Range: 1/2" to 14" Flanged End Ball Valve Details: Body: WCB / SS 304 / SS 316 / SS 304L / SS 316L Ball: SS 304 / SS 316 / SS 304L / SS 316L Stem: AISI 410 / AISI 304 / AISI 316 Seat: PTFE End Connection: Screwed to BSP / Flanged to 150# / Flanged to 300# motorized valves,motorized ball valve,actuator ball valves,ball valve actuator,actuated ball valve,
...more
Industrial Automation
We are manufacturer of Industrial Automation
Brand Name : Cair
Reviews & Ratings
Write a ReviewOpening Hours
Share your Correspondence Details to receive messages from Cair Euromatic Automation Pvt. Ltd.
Post Free Ad