Capping Machine Dealers in Gomtipur, Ahmedabad

• Electrical Input Requirements:: 230VAC Single Phase 50 Hertz 10Amperes.
• MOC:: Stainless Steel Grade 304
• Sealing Speeds:: 50 bottles per minute
• Neck Diameters:: 25mm – 80mm.
• Type Of Sealing Head:: Tunnel Type Induction Head
• Adjustable Height:: 0 – 300mm.
• Safety Interlocks: Foil Detection:
• If foil is absent, bottle is rejected and alarm is on.: Auto On/Off
• If no bottle within preset time, machine gets off.: Stalled Bottle:
• If bottle is jammed under machine, machine gets off.: Bottle Counter:
• Counts total number of bottles: Water Recirculation System.
• Water Tank Capacity:: 5 litres of DM Water
• MOC:: Stainless Steel 304
• Interlocks:: Water Flow Switch

Although there is a wide range of closures available ,the conventional bore sealing has, to date, been the most widely used method of sealing containers .Bore seals are inexpensive to manufacture and are relatively easy to fit. However, bore seals are do not form hermetic , flexible or even reliable seals- they leak. There are three types of closures available, which are either inserted into the neck of or form a combination of two. The effectiveness of this seal can be affected by temperature, natural relaxation & mechanical properties, all of which will cause seal to leak, especially in transit. Using the Induction Cap Sealing Technology, it's now possible to create alternative, alright, hermetic seals on the necks of containers. The process can produce significant cost savings. The seal is strong, flexible & yet easy to remove, and provides protection against cross contamintaion and an effective tamper-evident layer..     Advantages of Induction Cap Sealing Tamper Proof : It is not possible, from production to the Consumer that the content of the product be manipulated without being clearly noticed. Product Freshness : The taste and aroma of the product remains intact due to the hermatic seal. Protection against Leakage : There is no spillage or loss of contents of the product. Sales Promotion : The foil on the inside can be used for advertising or promotional purposes. Maximum Filling Speeds : The sealing takes place without any direct contact which allows full potential of the filling plant to be utilsed. Minimum Effort : The wad is put in the cap by the manufacturers. Thus the filling line requires only the Induction Cap Sealing equipment to be installed. Indirect Heating : Induction heating allows heat sensitive products such as creams , petroluem product , pesticides etc. to be sealed faster and safely than direct heating which would normally spoil or catch fire. IGBT Technology : IGBT's are more reliable and efficent at higher line speeds.  Wads The Wad basically consists of four layers : Cardboard or Foam Packing. Wax Layer. Aluminium Foil. Sealing Film.We see a pulp board packing material as the retaining wad, the wax dot pattern layer , the aluminium foil and the sealing film. The lines of force radiate through the foil and induces current flow in it. This increases the temperature of the foil. Due to this , the sealing film melts and adheres to the lip of the container. After the seal is broken, the board or foam packing is retained by the cap.  Process The process of Induction Cap Sealing is based on the principle that a conductive material i.e. Al Foil heats up on exposure to high frequency magenetic field generated by an Induction Unit. This is a non contact process without direct heat transfer.Due to this, the sealable closure liner can be placed in the cap by the manufacturer. The Wad consists of a board packing material, a wax layer, aluminium foil and a sealable film. The screw cap combination passes through the induction unit after closure of the container.when the container is under the induction head, heat is developed into the aluminmium layer.The wax layer starts to melt and penetrates into the board layer.The Sealing layer also melt & forms a tight seal against the lip of container. The necessary pressure is provided by the liner/screw cap combination.On opening the container, the board remains inside the cap and serves as a seal on further use, whereas the aluminium foil is permanently sealed on the rim of the mouth of container.  Containers Innerseal can be used on containers made of PET,PVC,Polythene,Glass and other thermoplastics.They are suitable for use with screw type Snap On,Child resistant and other customer closures as long as the seal is in positive contact with the neck of container. A uniform neck finishing is required for good Induction Sealing.The sealing are not to be very wide.The small 50 ml to the big 200.Its Drum having a neck size of 10 mm opening to the wide mouth of 120 mm can be Induction sealed.Induction Sealing liners for HDPE,LDPE,PET & PP in the different thickness locally available.

• Model: SBCS – 40V GMP Model
• Output / Hour*: 600 per hour (Output depend of bottle and Cap sizes)
• No. of sealing head: 1 Nos.
• Electrical Specification**: 1 HP / 440 Volts / 3 Phase / 50 Hz (Four wires) For Main Machine.

  Our Vial PP Cap sealing Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc. Description: The semi automatic cap sealing machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Machine is motorized incorporating rotating threading & sealing rollers, for threading & sealing of VIAL cap. Operation: Require manually feeding & unloading container, where the body and the neck of the container are positioned below the rotating head and sealing head is performing perfect operation of threading & sealing. Salient Features: The unit is made compact & versatile. S.S. Elegantly Matt Finished Body. Built in front control panel. Quick setting. Motorised head movement. No change parts require for different container diameter. Low noise level, low power consumptions. Adjustable bottle height gauge for easy and quick setting. SS cladding or hard chrome platting of all exposed parts to ensure long life and resistance against corrosion. Sealing pressure can be varied to suit different gauges and size of caps.

AUTOMATIC High Speed LIQUID Vial Filling & VACUUM Rubber Stoppering Machine MODEL: AHVF 4, 6 & 8 Description: High Speed Automatic Vial Filling & Rubber Stoppering Machine suitable for the filling & rubber stoppering of glass vials. Our Automatic Vial Filling & Rubber Stoppering Machine is widely uses in SMALL & large volume injectable preparations. Machine consist automatic feeding, filling, bunging & ejection system all complies as per cGMP requirements. Automatic Vial Filling & Rubber Stoppering Machine can be attached to Vial Washing Machine and Vial Cap Sealing Machine in order to complete online Sterile Vial Filling Line. Machine complies as per GMP requirements. Our standard machine equipped with stainless steel piston pump for the liquid filing, further we can also provide peristaltic pump for higher filling accuracy upon specific customer request. Salient Features: • Suitable for the filling Volume of 2ml to 250ml. • Piston pump/Peristaltic pump aseptic filling. • Filling with accuracy of ±0.5-1% • Filling with accuracy of ±0.5-1%. • All Contact Parts Made from S.S 316L & framework by S.S. 304. • ariable A.C. frequency drive for speed adjustment. • Digital Vial Counter for counting production output. • In-feed Turn Table/ Unscrambler for automatic feeding of objects. • On-line Mechanism. • “No Vial - No Filling” system. • “No Vial - Machine Stop” system. • IQ/OQ documentation can be provided Process Operation: The incoming dry vial (sterilized and siliconised) are fed through the unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit. The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both, glass as well as S.S. syringes can be used. A Star Wheel is provided which holds the vial during filling operation. A sensor is provided for 'No Vial-No Filling' operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by starwheel for filling operation and starts filling when it starts to move up and after completion of filling operation, starwheel delivers six vials together on conveyor for rubber stoppering operation.

The precision engineered Vial Filling & Stoppering Machine manufactured by us is designed to successfully meet the operational requirements of various industries. Further, these can be availed with the a. C. Frequency drive for speed control and are acknowledged for features like no vials and no filling systems. These are offered at a fair price range

• Model: SBCS-100V
• Output / Hour*: 3600 to 6000 vials.
• Direction of Movement**: Left to Right

BHAGWATIA Automatic Aluminum Cap Sealing Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.

Although there is a wide range of closures available ,the conventional bore sealing has, to date, been the most widely used method of sealing containers. Bore seals are inexpensive to manufacture and are relatively easy to fit. However, bore seals are do not form hermetic, flexible or even reliable seals- they leak. There are three types of closures available, which are either inserted into the neck of or form a combination of two. The effectiveness of this seal can be affected by temperature, natural relaxation & mechanical properties, all of which will cause seal to leak, especially in transit. Automatic induction cap sealing machine is designed for rapid and reliable performance. When performance and system control are crucial to your operation, then this is the equipment for you. It has a touch screen input and controller for high tech sealing operation especially suitable in pharmaceutical applications. The induction cap sealer meets all the required industry requirements and therefore recommended for other industries such as food, beverage, cosmetics, oil packaging and chemical manufacturing industries. This equipment can be used for both low production as well as high production runs making it among the best equipments for industries with a wide range of products for packaging. The equipment produces the best hermetic oxygen barrier that ultimately extends the shelf life of the product with no possibility of leakages or seal damage. Tamper Proof : It is not possible, from production to the Consumer that the content of the product be manipulated without being clearly noticed. Product Freshness : The taste and aroma of the product remains intact due to the hermatic seal. Protection against Leakage : There is no spillage or loss of contents of the product. Sales Promotion : The foil on the inside can be used for advertising or promotional purposes. Maximum Filling Speeds : The sealing takes place without any direct contact which allows full potential of the filling plant to be utilsed. Minimum Effort : The wad is put in the cap by the manufacturers. Thus the filling line requires only the Induction Cap Sealing machine to be installed. Indirect Heating : Induction heating allows heat sensitive products such as creams , petroluem product , pesticides etc. to be sealed faster and safely than direct heating which would normally spoil or catch fire. IGBT Technology : IGBT’s are more reliable and efficent at higher line speeds.

CAPPING MACHINE   Capping machine is used for tightening caps over bottles; this simple operation is possible due to the pneumatic clamping and tightening of caps to the bottle mouth. Placing the caps on bottles is done manually. ALSO KNOWN AS CAPPING MACHINE PLASTIC BOTTLE CAPPING MACHINE BOTTLE CAP MACHINE

• Voltage: 415 Volts
• Driven Type: Electric
• Application: Apparel, Beverage, Chemical, Commodity, Food, Machinery & Hardware, Medical, Textiles
• Automatic Grade: Semi-Automatic
• Power: 1 HP
• Type: Filling Machine
• Packaging Details: As per customer's requirements.
• Port: India
• Packaging Material: Glass, Metal, Paper, Plastic, Wood
• Cap Sealing Machine: Semi Automatic ROPP Cap Sealing Machine
• Model Number: Bhagwati -40
• Packaging Type: Bags, Barrel, Bottles, Cans, Capsule, Cartons, Case, Pouch, Stand-up Pouch
• After-sales Service Provided: Engineers available to service machinery overseas

• Type: Machine
• Driven Type: Pneumatic
• Automation Grade: Manual

• Voltage: 220V
• Brand Name: Nikita
• Body Material: MS
• Machine Weight: 300-400kg
• Frequency: 50-60Hz

Screw Capping Machine, Food Packaging Machine

Automatic Vial Filling & Rubber Stoppering Machine, Label Coding Machine

Cap Sealing Machine, Batch Coding Machine, paper stitching machine

Capping Machine, car display racks, Cup Sealing Machine

Cap Sealing Machine, Liquid Filling Machine, Powder Filling Machine