Carbon Sealing Rings Dealers in Ahmedabad

We make available fine quality Carbon Seal Rings in customized sizes. Buyers can place bulk or retail orders with us all year round and expect on time delivery of consignments. Our products are packed under controlled conditions to ensure their quality is not compromised and buyers are presented with brand new products. We have an ultramodern facility to pack our products.

We specialize in offering PTFE Carbon Filled Seal Ring to the customers. The PTFE Carbon Filled Seal Ring is manufactured from high-grade components. The PTFE Carbon Filled Seal Ring is used for the rotary seal purpose.

Carbon filled Teflon seal Rings are the heart of rotary joint and are manufactured from Carbon Filled Teflon which offers more wear & tear resistance compared to ordinary carbon seal rings. Also they are very less chances of Bulging and breakage. Carbon filled Teflon Guide Bush are manufactured from Carbon Filled Teflon which are excellent for paper mills. Its properties are Pressure Withstand : 15kgcm² Temp. Withstand : 320° C APR 20, 2017 Carbon filled Teflon seal Rings are the heart of rotary joint and are manufactured from Carbon Filled Teflon which offers more wear & tear resistance compared to ordinary carbon seal rings. Also they are very less chances of Bulging and breakage. Carbon filled Teflon Guide Bush are manufactured from Carbon Filled Teflon which are excellent for paper mills. Its properties are Pressure Withstand : 15kgcm²,Temp. Withstand : 320° C

Mechanical Seal Ring Materials require high strength and a relatively high modulus of elasticity to with stand deformation at the interface. Carbon-graphite seal materials provide the strength and rigidity which are especially important in high pressure , high vacuum , high temperature and zero leakage mechanical end-face seals. High thermal conductivity is essential in removing heat from the interface.   Pure carbon graphite is strictly speaking a ceramic material , but in the form that it is used for seals it will usually be impregnated with other materials that are provided to variously improve the sealing. By reducing porosity , wear performance or strength is increased. it is widely used , not only as one of the face pair on the vast majority of mechanical seals , but also found as the most popular material for segmented circumferential seals and for piston rings in dry or marginally lubricated conditions.   Impregnation of Carbon - Graphite Seals   Impregnation of carbon seals can be done with a variety of materials to control permeability. in addition to thermoset resins , other types of impregnants include thermoplastics , metals and inorganic salts or glasses. The temperature limit of the impregnant places an upper limit on the operating temperature of the carbon parts.   Metals such as antimony , silver , copper , nickel and babbitt can improve the strength , thermal conductivity , and tribological characteristics of the materials. Impregnants made of inorganic salts usually phosphate or borate - and glasses are used in high temperature applications. Carbons impregnated with soluble salts must be handled carefully to avoid exudation , especially under humid conditions , but loss of impregnant rarely affects any physical property of a seal other than permeability. Mechanical seal primary rings can be supplied as per customer drawings and specifications. The rings can be supplied plain , shrink fitted or cemented in metal retaining rings. Mechanical seal rings can also be supplied with the sealing face lapped flat to one helium light light band.   Guidelines for the installation & Design of Carbon Seal Rings   Solid Carbon Rings : Normally the seal rings are used in solid form machined from suitable size of carbon blank. The Shape and size of the rings vary according to the design of mechanical seals which are designed for its respective operating conditions. Since carbon - graphite are stable at high temperature , majority of the seal ring designs consitute solid rings. Cold Pressing : For a cold press fit in steel , where the application is lower than 100o C steel housings made to H7 bore tolerance are normally recommended. if the housing material has a higher coefficient of thermal expansion than steel the temperature limitation is normally lower. When pressing bearing into its housing a mandrel with collar whose diameter is approximately three tolerances be low the drilling tolerance of the carbon bearings as supplied should be used to press the bearings in. the bore diminishes by 70 - 80% of the pressing over dimension according to the quality and dimension of the housing. Shrinking : We Recommend shrinking carbon seal rings directly into the metal housing which are to be used at operational temperatures of over 100o C. To shrink in the bearings , experience has shown that the tolerance overlap should be in the range corresponding H7 / x8...z8. The selected Heating temperature for mounting must be sufficiently high to allow the cold bearings to be easily inserted. On shrinking the carbon bearing bore diminishes by approximately 80...100% of the shrinking overdimension. in the case of the above mentioned shrink fits H7 / x8...z8 this diminishes according to the wall thickness ratio. in order to keep to exact tolerances it is advisable to machine the bearing bore to size after shrinking. Adhesives : Adhesives are only suitable for bearings which are subject to low temperatures ( up to 200o C ). Bonding to the housing with commercially available adhesives is possible.for higher temperatures , thermal setting adhesives should be used. Suitable Counter Face Materials Suitable :Plain Steel , alloyed steel (Chrome Steel) , Hard Metal , Ceramic & glass. Suitable under certain conditions :Nonferrous heavy metal , chrome nickel steel , chromium plate materials. Unsuitable :Aluminium and its alloys.

We offer a variety of PTFE seals and gaskets as per the user's specifications. PTFE seals are reliable, corrosion resistant, non - contaminating non-aging and can be used up to +250° C. Envelope Gaskets are named so as rubber or asbestos rings are sandwiched between PTFE flaps. These gaskets have the resilience of asbestos or rubber but have corrosion resistance of PTFE and are widely used in glass, glass-lined, carbon, porcelain or plastic equipment.

• Material: CARBON GRAPHITE
• Country of Origin: Made in India
• Shape: Round
• Surface Finish: Polished
• Packaging Type: Box
• Media: Steam

CARBON Seal eace rings in various sizes and designs and with close dimensional tolerance for use as an integral part of Rotary Joint in general utility. CARBON Sealing Rings are used as the wear face of most Rotary Joint for the sealing of fluids in all industries. CARBON seal faces are compatible with a wide range of metallic & ceramic counter faces including silicon carbide and tungsten carbide. The CARBON material used are done different impregnation as per the requirement of each machine & liquid medias. Some of the commonly used impregnation are Resin impregnation. Metal impregnation ete.

• Type: carbon ring
• Brand Name: aenterprise
• Material: carbon ring
• Style: raund
• Thickness: 6 to 12mm
• Application: sealing
• Grade: a
• Color: black
• Chemical Composition: all
• Dimension: mm
• Model Number: 9824510681
• Place of Origin: ahmedabd
• black: black
• black: blak

• Thickness: 5-7 mm
• Color: Black
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: Creative Carbon
• Condition: New
• Features: Smooth operations, dimensional accuracy, corrosion resistance, easy installation, long service life and low maintenance.

Swivel Ball Joint, Paddle Dryer Rotary Joint, Pneumatic Slip Ring

Carbon Seal Rings, High Capacity Sulphuric Acid Dilution Unit

Carbon Seal Rings, blower motor carbon brushes, carbon thrust bearing