Cartridge Housing Dealers in Lambha, Ahmedabad

Leistung’s DOE cartridge filter housings are ideally suited for various industries. Filter housing is constructed of shell, heads, cartridge holding plate, tie-rods and positive sealing arrangement for cartridge and choice of end connections. Knife edge / crushed seal fitting is provided to ensure complete isolation of filtered media.   Application: Pharmaceutical & Biotechnology Protection of membrane cartridges Filtration of extracts Water Treatment Pure water DI-water (pre-filtration) O. water (pre-filtration) Potable water Food and Beverages Mineral water, Beer wine fruit juice milk edible oils Cosmetics Mouth wash Perfume lotion shampoo Automotive E-coats Surface finishing Coolants, plating liquids Others Chemicals paper coatings printing inks solvents resins

• Filter Cartridges of Length: 5”, 10”, 20”, 30” etc.
• Available For: Single Cartridge & Multi Cartridge
• Design pressure: Full Vacuum to 250 bar Max.
• Temperature: 10 Deg C to 300 Deg C & for Gas Temp. upto 1000 Deg C
• O-ring Sealing: Standard Silicon, Viton, PTFE, EPDM

Single Cartridge Filter Housings are fabricated from SS304, SS316 and SS316L etc. varied material of construction. Housings are suitable to accommodate customised connection filter cartridges i.e. Both End Open Type, BSP/NPT threaded type and Code-VII adaptor type. Such housings are closed using TC clamp Closure or Eye Bolt Closure depending upon design pressure.   Multi-cartridge housings are different than single housings. They hold more than one cartridge at the same time in the same chamber, allowing for higher flow rates and higher filter surface area. Multi cartridge filter housings are designed as per ASME SEC VII DIV-1 code as per pressure vessel calculations. We carry ASME code stamped and non-code stamped models as well as other special options to suit your filtration application.   Features & Benefits Single Cartridge filter housing is Compact designed. Single round Housing Requires minimum floor space and can be dismantled quickly cleaning or replacement of Cartridges. Sanitary design filter housings are available with quick opening tri-clover clamps or ASA flanged nozzles. Drain, sampling, and vent connections are provided. T-style and inline configurations allow flexible piping options. Filter housings are suitable for filter cartridges of length 5”, 10”, 20”, 30” etc. Electro polished surface is provided on request. Multi Cartridge filter housings are suitable to installed a large nos. of filter cartridges for high flow capacities. Filter housing can be fully drained provided with swing bolts for quick opening & davit arm with wheel for ease of Lifting top covers. Externally mechanically polished, buffed or pickled. Various instrument configurations possible. Multi cartridge filter housings are suitable for cartridges with end-cap configuration of Both End Open, BSP/NPT threaded end, CODE-VII and customised   Standard Specifications Design pressure : Full Vacuum to 250 bar Max. Design temperature : -10 Deg C to 300 Deg C & for Gas Temp. Upto 1000 Deg C All parts with fluid contact are SS 304, SS 316L, Hastelloy, Monel, Duplex Steel, Alloy 20 etc. Housings are available with Eye Bolt & Swing Nut Closure, Lifting Lugs, Holding LUG or Support legs. Internally & Externally polished Upto Ra < 0.8μm, On-request internally can be polished upto Ra < 0.4μm and/or electro polishing also possible. O-ring sealing: standard Silicon, Viton, PTFE, EPDM.   Customized Specifications We understand that our customers are facing complex processes and environmental requirements. There where standard filter housing could not be sufficient, our engineers are able to design a custom made filtration solution.

• Color: Silver
• Usage/Application: Industrial , Water Filtration
• Brand: India Filters
• Flow Rate: 2000 M3/Hr
• Size: 10, 20, 30, 40, 50 Inch

10" & 20" STANDARD HOUSING Accept all standard 2 ½" diameter filter cartridges ¾"  & 1"FNPT Inlet and Outlet Operating Pressure - 100 psi Operating Temperature - 50oC "O" Ring bowl to head seal All FDA Grade Material Bowl wrench available. 10" & 20" LD (LARGE DIAMETER, BIG BLUE) HOUSING Accept all standard 4" diameter filter cartridges 1"  & 1½" FNPT Inlet and Outlet Operating Pressure – 100 psi Operating Temperature – 50oC "O" Ring bowl to head seal All FDA Grade Material Bowl wrench available.

PP Micron Cartridge Filter Housing, Reverse Osmosis Systems