Cartridge Dealers in Ctm, Ahmedabad

• Type: Water Filter
• Length: Upto 20 inches
• Diameter: Upto 6 inches
• Filtration rating: 5-10 micron

• Material: SS
• Type: Air Oil Separator
• Country of Origin: Made in India
• Operating Temperature: 120 Degree Celsius
• Spare Type: Cartridge
• Usage/Application: Air Filter
• Operating Pressure: 20 Bar
• Volume: 3.4 Litre

• Usage: Water treatment plant, chemical industries, textile industries and petroleum industries
• Minimum Order Quantity: 200 Piece
• Available Type: Slim and Jumbo
• Available Sizes: 10" to 40"
• Micron Rating: 0.5 , 1 , 5, 10, 25, 50 , 75, 100, 150
• Outer Diameter: 2", 2.5", 4", 4.5" & 6"
• Inner Diameter: 27 mm

 Wound Filter Cartridge are designed to meet the most demanding filtration duties. They offer an economic, compact, easily installed and maintained filtration system for removal of particulate removal from liquid. Wound cartridges are manufactured from a variety of carefully selected raw materials. These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound into cartridges with carefully controlled micron rating. From raw material to finished products, we are in control of the quality and filtration characteristics. They are appreciated due to high dirt holding capacity and to the rugged construction, which allow facing different application in liquid and gas filtration. Operation Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles, providing high efficiency, high dirt retention & filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge. Yes ! I am Interested

• Application: Industrial
• Material: Polymer
• Color: White
• Brand Name: TFI
• Size: 5-40 inch

• Length: Standard 5”, 10” , 20” , 30” , 40” &other lengths are available on request.
• Filter Media: SS304, SS 316L, Hastelloy
• Upstream and Downstream Filter Support: Must Using Coarser Mesh Support
• Core: Perforation or With / Without Spring
• End Cap: SS 304, SS 316L or Hastelloy
• Gasket/O-ring: Silicon, EPDM, Viton,PTFE
• Type of caps: Both End Open, CODE VII, CODE II, BSP / NPT threaded
• Filtration Rating: 1 , 3 , 5 ,10 , 20 , 50 , 100um
• Outer Diameter: Standard 64 mm &other Diameters are Available On Request

Are you looking for the best Wire Mesh Filter Cartridge manufacturer in Gujarat, India? You are in the right place. Our company TFI Filtration UK Ltd is the best. The Wire mesh refers to a type of filter mesh that is stainless-steel. Its function is to filter unwanted contaminants from different types of fluids. What Is The Size Of Wire Mesh Filter? • It is the size of the individual opening of the stainless-steel mesh filter. • It is normally in fractional inches and microns or millimetres. • A micron is twenty-five thousandth inches and a one-thousandth millimetre is one micron. Our company is the best Wire Mesh Filter Cartridge Supplier and ensure that our products meet the needs of our customers. The Wire mesh filter of our company has amazing benefits as well. Some are as follows: Durability Our wire mesh filter offers durability to your application. This is because it does not react with different fluids. Durability ensures that you have a maximum operation for your filtration process. You also spend less on purchasing stainless-steel filter mesh. Versatility We have a wide range of applications that you can use a wire filter mesh. This is because of the unique features that stainless-steel filter mesh offers. These features include their operating temperature and pressure, corrosion resistance and compatibility with different fluids. Our company is the best Wire Mesh Filter Cartridge exporters in the market today. The products of our company are made with the use of quality raw materials and are tested at every stage to ensure that it meets the international standard quality.

• Brand Name: Veljan
• Pressure: High Pressure
• Max Pressure: 17.5-21Mpa
• Dispalcement: 7.5-237ml/r
• Max Speed: 1800r/min

• Material: Plastic
• Usage/Application: Office
• Paper Size: A5
• Binding: Softbound
• Closure Type: Button
• Thickness: 0.60 mm
• Shape: Rectangular
• Pattern: Plain

• Color: Black And White
• Type: Inkjet Printer Cartridge
• Brand Name: Imported
• Print Method: Handheld
• Ink Type: Black
• Model Type: Handheld inkjet printer

• Material: PP, Metal
• Application: For Mobile Applications
• Size: Available in Different Size
• Warranty: 1 Year
• Pack Type: Box

Seal Kits Shaft For Industrial

Filter Cartridges have very high Dirt capacity pleated Depth. Best rated Filter in range of 0.2 µ to 70 µ, lengths 5", 10" 20", 30" & 40" also have variety of end fitting for Housings Thermally Bounded Polypropylene Filter Cartridges having with low pressure loss. Polypropylene Construction with best Chemical compatibility. No surfactants or binder resins. Follows all FDA standards and in-situ sterilized. We are the leading manufacturer and exporter company of Pleated Polypropylene Cartridges. We are the most relaible supplier of Pleated Polypropylene Cartridges in Ahmedabad, Ankleshwar, Baroda, Mumbai and Mumbai and many more cities of India. If you want to find more information about the manufacturer of Pleated Polypropylene Cartridges in India then cantact us or email us for getting free catalogue of Pleated Polypropylene Cartridges .

100% Polypropylene Cartridge made from very fine fibers. Graded Pore Structure, which gives longer service life. Polypropylene fibers sealed at fusing temperature, hence no media migration. Polypropylene media gives wide chemical compatibility. Temperature range – up to 70° C. Available in 10”, 20”, 30” and 40” length with pore size ranging from 0.5 to 100µ Length in inches – 10, 20, 30, 40 & 9 ¾ , 19 ½ , 29 ¼ , 39. Micron rating – 0.5, 1, 3, 5, 10, 20, 50 & 100

Pleated Cartridges were developed to gather the process wants and throughput requirements of the pharmaceutical, food and beverage, electronics, chemical, and other critical industries. This high show range of filter cartridges is construct of to a non-woven polyester support.

Pure ETO Cartridges, Autoclave Sterilizer Specifications

• Material: STAINLESS STEEL
• Brand Name: ANAND
• Type: Micron filter
• Diameter: 2TO 6 inch
• Automation Grade: Manual
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)/D/A
• Usage/Application: Industrial
• Micron Ratings: 5 MICRON
• Filter Type: Cartridge Filter

We have adopted most critical technology to manufacture a comprehensive range of Water Filter Cartridge. This is expressly intended for filtration at high temperature and high corrosion dispensation use. The cartridge comprises stainless steel filter cartridges. This range is featured with rugged construction and precise measurement.

• Length: 10”, 20”, 30”, 40” & in tube Forms
• Inner Diameter: 28mm
• Filtration Rating: 0.5, 1, 3, 5, 10, 20, 40, 75, 100µ
• Material of Construction: S.S. 316L
• Support, Core & End Cap: S.S. 304 / 316 / 316L
• Outer Diameter: 63mm, 70mm, 80mm
• Configuration: Double Open End (DOE) / 1” BSP, 222, 226

For Filtration at high temperature and high corrosion processing application FEATURES & BENEFITS High dirt holding capacity Low pressure drop due to high porosity Accurate filtration rating High reliable Standard specification Easily cleanable by conventional chemical cleaning & ultrasonic etc. SPECIFICATION

Multitech compatible toner cartridges are high quality toner cartridges. It gives same quality and out put like original cartridge. It comes with 100% manufacturing defective replacement warranty.

• Usage/Application: Industrial
• Micron Ratings: 20-80 Micron
• Filter Medium Material: Microfiber
• Brand: Indiafilter
• Pressure: 10-15 Bar
• Working temperature: -10 to 140 Degree C

 Aqua Line Filter Cartridge  v   Lower Capital Cost Ø  50% reduction in capital expenditure over typical steel vessels. Ø  Cost saving could more significant when compare to lined vessels or exotic metals.     v            v Lower Operating Costs   Ø  Extended surface media leads to longer element life, which equals fewer change outs. Ø  High tech media, such as polyform and microform, deliver efficiently and performance required.     v   Faster Change Outs Ø  Access to Aqualine filtration elements required virtually no tools. Ø  The elements are self guiding during installation and retrieval. Ø  There are no center posts that could cause contamination during change out. Ø  The modular design allows for sequenced change out to eliminate downtime.     v  Smaller Equipment Foot Print Ø  Codeline FRP housings are modular, which elements stand alone housing. Ø  They can easily fill in vacant location on and RO skid. Ø  An Aqualine skid can take up far less floor space than a traditional vessel required for the same flow. Ø  Easy, ergonomic design eliminates the needs for heavy support equipment, such as cranes.     v  Specification Ø  Removal Rating – 1, 5 & 10 µ Ø  Filter Diameter – 17.5 cm Ø  Filter length – 102 & 152 cm Ø  Max. Operating Temp. – 82oC Ø  Recommended Flow – 950 lpm Ø  Max. Flow – 1890 lpm Ø  Recommended Change out Differential pressure – 2.07 bar

A melt blown process is used to create a solid matrix depth filter which traps particles throughout the cross section of the filter element. Its graded density pore structure traps larger particles in the outer layer and smaller particles in the inner layer. Polypropylene Spun Filter Cartridge that we offer is made up of 100 % polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Our Polypropylene Spun Filter Cartridge offers best performance as it has high dirt holding capacity and offer good flow. The Polypropylene Spun Filter Cartridge structure features excellent depth filtration due to good porosity. Polypropylene fibers sealed at fusing temperature ensuring no media migration. Also, graded pore structure gives longer service life. The maximum operating temperature of our Polypropylene Spun Filter Cartridge is 60°c and recommended charge out differential pressure is 35 psi. Polypropylene Spun Filter Cartridge is widely applied in water treatment industry, food & beverages industry, pharmaceutical industry, chemical industry, color & dyes industry, textile industry, edible oils, electronics, organic solvents, municipal, etc.