Cast Gate Valve Dealers in Ahmedabad

• Size: 1/4″ To 2″ INCH
• Material: Steel
• Application: Water Fitting
• Weight: 10-15kg
• Color: Grey
• Feature: Casting Approved, Corrosion Proof
• Pressure: High, Low, Medium
• End Connection: Screwed

• Size: 21/2"
• Material: Cast Iron And Also Available In Cast Steel, Stainless Steel
• Corrosion Resistance: Yes
• Technique: Hot Rolled
• Packaging Type: Box
•  :  

• Brand Name: Allines
• Feature: Out Side Screw and yoke construction,Valves provided with Backseat arrangement etc.
• Condition: New, Good
• Place of Origin: Ahmedabad  
• Applications: Pharmaceutical Plants,Petrochemical Industries,Steel Plants,Paper Industries etc.
• Packaging: Bulk

Avail from us premium quality Sand Casting Gate Valve in a wide variety of specifications. We are a well-known Sand Casting Gate Valve Manufacturer, Exporter and Supplier based in India. The Sand Casting Gate Valve moves linearly, perpendicular to the direction of flow. Our Sand Casting Gate Valve is generally used in the fully opened or fully closed position. Also, Sand Casting Gate Valve is used where minimum pressure drop and bi –directional on – off service is required.Flexible Wedge : A one-piece cast flexible wedge ensures tight Seat rings over a wide range of differential pressure and temperatures Compensates for deformation of body due to pipe stresses Will not stick when valve is closed hot and allowed to cool Seatrings : Screwed seat-rings, bottom seated type lapped on both sides Seal Weld seat-rings prevents leak proof path between the seat-rings and body. This design is superior to screwed seats which can loosen up due to temperature fluctuation / corrosion or vibration and results in leakage Cryogenic Service : Extended bonnet with vapor column length according to BS 6364. Vapor column allows the stem packing to be functional by keeping it away from the cryogenic fluid BY - Pass Arrangement A By-Pass arrangement service to purposes : In steam services, to warm up the line before opening of the main valves.(2)In steam and other lines, to balance the pressure on both sides of the main valves wedge or plug to bring down the valve opening torque Lantern Rings : To prevent escape of service fluid to atmosphere This finds applications in stringent environment conditions or in the case of potentially harmful to service fluids Locking Devices : Locking devices are used to secure a hand wheel in a fixed position to prevent accident or authorized operation of valvesChain Wheel Positions : Chain wheels are used for the valves located too far above the floor for convenient hand wheel operation Salient Features : Meets designs as per requirements of ASME B 16.34 / API 600 / API 603 / API 6D Meets Testing as per requirements of API 598 / API 6FA / ISO 5208 Out Side Screw and yoke construction Valves provided with Backseat arrangement Valves provided with Backseat arrangement Integral Seat design available for only S.S. cast body Graphite packings available for controlled clearance between stem, gland and bonnet bushing for low emissions meet 100 PPM maximum fugitive emission level Anti – Frictional Thrust bearing in yoke sleeve for higher sizes and classes Live loaded & Low emission design valves Grub Screw : Secures Yoke Nut in bonnet Grease Nipple : Supplies lubricants to the mating parts Flanged Ends as per ANSI / ASME B 16.5 / API 605 / DIN / BS 3293 Butt Weld Ends as per ANSI / ASME B 16.25 Face to Face dimensions as per ASME / ANSI B 16.10 Bi- directional shut-off Options : Self – aligning two piece gland design Gear Box / Pneumatic / Rotary Actuator operated valves on request Helium Leak Test shall be provided on request Ring joint facing available in higher classes Satellited / Hard Facing on request Actual X- Ray of valves provided on request Applications : Pharmaceutical Plants Fertilizers & Agro Chemicals Petrochemical Industries Steel Plants Oil & Gas Industries Paper Industries Petroleum Refinery Cement Industries Thermal Power Plants Cryogenic Services

• End Connection: Butt Weld
•  Type: Steel Gate Valves
• Condition: New
• Pressure: Low, Medium
• Feature: Blow-Out-Proof, Casting Approved
• Color: White
• Weight: 10-15kg, 15-20kg
• Application: Gas Fitting
• Material: Stainless Steel
• Brand Name: SRK
• Size: 100-150mm, 150-200mm
• Country of Origin: India

The company is an Ahmedabad (India) based Manufacturer, Exporter and Supplier of Cast Steel Gate Valves. The Cast Steel Gate Valves, offered by the company, are widely demanded by the clients owing to their unsurpassed quality and excellent performance. Fabricated from the best raw materials, the Cast Steel Gate Valves are available in various sizes. Specifications Of Cast Steel Gate Valves : Standard : API-600 Size : 2-24" Class : 150 to 2500 lbs Raw Material : WCB, LCB, CF8 304, CF8M 316, CF3 304L and CF3M

• Size: Standard
• Type: Casting
• Material: Cast Steel
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• End Connection: Flanged, Screwed

• Size: 15 to 300 DN mm
• Pressure: High, Medium
• Temperature Of Media: 593 Deg C
• Pressure: 104 Bar
• Warranty: 1 Year
• Surface: Polished

Located in Ahmedabad(India), we are a high-flying name when it comes to quality-centralized and cost effective products. It is Supplier & Manufacturer of Cast Gate Valve. Our entire range is made to go through to extreme quality control checks to make sure they adhere to standards of global management systems. Our anti-corrosive cast gate valve is available with a quality warranty of 12months against any manufacturing defect.

• Size: 40 MM TO 600 MM
• Country of Origin: Made in India
• End Connection: FLANGED
• Material: Cast Iron
• Corrosion Resistance: Yes
• Surface Treatment: Paint Coated

• CAST STEEL: STAINLESS STEEL

We offer gate valves are primarily designed to start or stop flow, and when a straight line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The gate (also called wedge) of a gate valve is completely removed when the valve is fully open; the wedge is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed. advantages of using gate valves: good shutoff features gate valves are bidirectional and therefore they can be used in two directions pressure loss through the valve is minimal.

• Media: Water
• Material: Cast Iron
• Brand Name: Radiant Flow
• Automation Grade: Manual

We are the leading exporter and supplier of this products.

• Brand Name: PRIME

We offer wide range of investment casting gate valve, globe valve, check valve, ball valve & flush bottom valve.

Appucalle Standards Steel Gate Valves API 600/API6D Steel Gate Valves ISO 10434/150 14313 Steel Valves Asme B16.34 Face To Face ASME B16.10 End Flanges ASME B16.5 Butt Welding Ends ASME B16.25 Inspection And Test API 598/API 6D   Design Descriptions Full Port Design 0s4 Out Side Srcew And Yoke Bb. Bolted Bonnet Flexible Wedge, Fully Guided Choice Of Solid Or Split Wedge Renewable Seat Rings Forged T-head Stem Rising Stem And Non-rising Hand Wheel Flanged Or Butt Welding Ends Available With Bg Operator   Materials Of Parts S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo 1 Body A216-WCb A217-WC6 2 Bonnet A216-WCB A21 7-W6 3 Wedge A216-WCB+CR13 A217-WC6+HF 4 Stem A182-F6a CR-MO-V 5 Seat ring Al 05+CR13 A182-F1+HF 6 Stem Backseat A276-420  A276-304 7 Bonnet Gasket Spiral wound (Graphtle+304) 8 Bonnet Stud A193-87 A193-B16 9 Bonnet Stud Nut A194-2H A194-7 10 Packing   Graphite 11 Gland A276-420 A276-304 12 Gland Flange A216-WCB A217-WC6 13 Eye Bolt Pin Carbon Steel A276-420 14 Eye BoR Carbon Steel A193-87 15 Eye Boll Nut Carbon Steel A194-2H 16 Grease Fitting   Brass + Steel 17 Yoke Sleeve   Aluminium - Bronze 18 Yoke Sleeve Jam Nut   Carbon Steel 19 Hand Wheel   Malleable Iron 20 Hand Wheel Nut   Carbon Steel     Dimensional Datas Of Ansi Class 600 LB NPS 2 2/1/2002 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in ON 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 MM L/L1 11.5 13 14 17 22 26 31 33 35 39 43 47 55 57 61 65 70 82 in (RF/BW) 292 330 359 432 559 660 787 838 889 991 1092 1194 1397 14.48 1549 1651 1778 2083 mm L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.5 61.5 65.5 70.62 82.62 in (RTJ) 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461 1562 1644 1794 2099 mm H 16.5 18.75 20.38 25.5 33 40.38 48.38 57 62 70.62 76 87 101.5 105 109.5 140 124 140 in (Open) 418 476 518 646 840 1025 12.3 1450 1575 1795 1930 2210 2580 2665 2780 2895 3150 3560 rnal Do 8 10 10 12 18 20 24 24 24 24 26 26 29 29 32 32 38 40 in   200 250 250 300 450 500 600 600 600 600 640 640 720 720 800 800 950 1000 mm Wt(kg.) 36 52 67 112 170 393 610 890 1245 1530 1945 2450 2995 3475 3725 4045 4185 4480 RF   29 42 53 83 125 310 472 730 1055 1240 1625 2030 2590 2855 3065 3440 3780 4085 BW   Dimensional Datas Of Ansi Class 900 LB N PS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm L/L1 14.5 16.5 15 18 24 29 33 38 40.5 44.5 48 52 61 in (RF/BW) 368 419 381 457 610 737 838 737 1029 1130 1219 1321 1549 mm L2 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 in (RTJ) 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 mm H 19.62 21.5 22.5 26.62 35.5 4.5 53 60 74.88 81 87 101 104 in (Open) 498 547 573 678 900 1103 1345 15.25 1900 2055 2215 2565 264 mm Do 10 10 12 18 20 24 26 29 32 32 38 38 40 in   250 250 300 450 500 600 640 720 800 800 950 950 100 mm Wt(kg.) 74 131 101 172 335 640 1100 1600 2250 2850 3060 3935 49 RF   54 105 78 135 260 515 920 1380 2010 2565 3485 3250 4065 BW

• Material: C.I / C.S / SS 304 / SS 316 & More
• Size: 1/2
• End Connection: Screwed / Socket Weld / Butt Weld / Flanged End
• Temperature Of Media: High Temperature, Medium Temperature, Low Temperature
• Automation Grade: Hand Wheel Operated
• End Connection Type: Screwed / Socketweld / Flanged End