Cast Steel Valves Dealers in Ahmedabad

• Material: Cast Steel
• Application: Water Fitting
• Feature: Casting Approved, Durable
• Pressure: High, Low, Medium
• Structure: Double Half Shaft
• Port Size: 0.1mm-5cm
• Number Of Way: 2way, 3way, 4way
• Size: 1/4″ To 2″ INCH
• Power: Hydraulic
• Technics: Gear Operated, Hard Sealing

The company has carved a niche for itself as Manufacturer, Exporter and Supplier of Cast Steel Check Valve in Ahmedabad (India). The company offers the best quality Cast Steel Check Valves known for their accurate construction, reliability and long service life. Available in a wide range of specifications and sizes, the Cast Steel Check Valves are widely demanded by the clients. Specifications of Cast Steel Check Valve : Standard : BS 1868/API-6D Size : 2-24" Class : 150 to 2500 lbs Raw Material : WCB, LCB, CF8 304CF3M, CF8M 316 and CF3 304CF3M

• Material: Carbon Steel
• Finishing: Polished
• Automatic Grade: Automatic
• Packaging Type: Carton
• Diameter (mm): 40 Mm, 50mm
• Media: Water
• Voltage Range: 24 V AC
• Number Of Way: 2way

• Country of Origin: India
• Type: Cast Steel Valves
• Material: Carbon Steel
• Certification: ISO 9001:2008 Certified
• Number Of Way: 2way
• Condition: New
• Automatic Grade: Manual
• Diametre (milimetre): 100 To 1000 Mm
• Valve Size: 1inch, 1/2inch, 2inch, 3/4inch
• Specialities: Non Breakable, Heat Resistance
• Packaging Type: Wooden Box, Carton, Pallets
• Diameter (mm): 50mm, 60mm
• End Connection: FLANGED END
• Size: 15MM TO 200MM

• CAST STEEL: STAINLESS STEEL

We offer gate valves are primarily designed to start or stop flow, and when a straight line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The gate (also called wedge) of a gate valve is completely removed when the valve is fully open; the wedge is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed. advantages of using gate valves: good shutoff features gate valves are bidirectional and therefore they can be used in two directions pressure loss through the valve is minimal.

• End Connection: Butt Weld
•  Type: Steel Gate Valves
• Condition: New
• Pressure: Low, Medium
• Feature: Blow-Out-Proof, Casting Approved
• Color: White
• Weight: 10-15kg, 15-20kg
• Application: Gas Fitting
• Material: Stainless Steel
• Brand Name: SRK
• Size: 100-150mm, 150-200mm
• Country of Origin: India

RangeConforming to API 600 Class 150# sizes 2" to 24" Class 300# sizes 2" to 12" Class 600# sizes 2" to 14”OverviewKirloskar Brothers Limited is a leading designer and manufacturer of centrifugal pumps and pumping systems for the Industry sector.FeaturesRigid and Sturdy Design Low Pressure Loss Long service lifeApplicationsNaptha and naptha derivatives Liquids having corrosive properties Oil, refineries and process industries

We are offering cast steel lubricated taper plug valves. Technical specifications : 1) size range : flanged ends - 15 mm to 250 mm screwed ends - 15 mm to 80 mm 2) design standard : bs 5158 3) face to face : bs en 558 -1 4) testing standard : en 12266-1 (bs 6755-1) 5) pressure rating : class 125 6) port : two way three way four way

We are the leading exporter and supplier of this products.

Appiicarit Standards Steel Gate Valves API 600/API6D Steel Gate Valves ISO 10434/150 14313 Steel Valves Asme B16.34 Face To Face ASME B16.10 End Flanges ASME B16.5 Butt Welding Ends ASME B16.25 Inspection And Test API 598/API 6D   Design Descriptions Full Port Design Os & y Out Side Srcew And Yoke Bb. Bolted Bonnet Flexible Wedge, Fully Guided Choice Of Solid Or Split Wedge Renewable Seat Rings Forged T-head Stem Rising Stem And Non-rising Hand Wheel Flanged Or Butt Welding Ends Available With Bg Operator   Materials Of Parts S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo 1 Body A216-WCb A217-WC6 2 Bonnet A216-WCB A217-W6 3 Wedge A216-WCB+CR13 A2174NC6+HF 4 Stem A182-F6a CR-MO-V 5 Seat ring A105+CR13 A182-F1+HF 6 Stem Backseat A276-420 A276-304 7 Bonnet Gasket Spiral wound (Grapats+304) a Bonnet Stud A193-67 A193-616 9 Bonnet Stud Nut A194-2H A194-7 10 Packing   Graphite 11 Gland A276-420 A276-304 12 Gland Flange A216-WCB A217-WG6 13 Eye Bolt Pin Carbon Steel A276-420 14 Eye Bolt Carbon Steel A193-B7 15 Eye Bolt Nut Carbon Steel A194-2H 16 Grease Frtting   Brass + Steel 17 Yoke Sleeve   Aluminium - Bronze 18  Yoke Sleeve Jam Nut   Carbon Steel 19 Hand Wheel   Malleable Iron 20 Hand Wheel Nut   Carbon Steel   Dimensional Datas Of Ansi Class 150 LB NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm L 7 7.5 8 9 10.5 11.5 13 14 15 16 17 18 20 22 24 24 28 28 in (RF) 178 191 203 229 267 292 330 356 381 406 432 457 508 559 610 610 711 711 mm L1 85 9.5 11.12 12 15.88 16.5 18 19.75 22.5 24 26 28 32 34 36 36 38 40 in (BW) 216 241 283 305 403 419 457 502 572 610 660 711 813 864 914 914 965 1016 mm H 15.25 17 18.88 23 30.5 37.62 54.5 53.12 59.38 67 74.5 83.5 98.25 110.5 116.5 124 129 146.5 in (Open) 386 434 480 584 765 956 1149 1350 1508 1703 1892 2119 2500 2806 2960 3150 3280 3720 mm Do 8 8 10 12 12 14 16 15 20 22 24 26 29 29 32 32 38 40 in   200 200 250 300 300 350 400 450 500 550 600 640 700 720 800 800 950 1000 mm Wt(kg.) 18 18 32 50 77 121 178 265 463 463 621 792 1521 1521 1838 2261 2490 3310 RF   15 15 26 41 69 108 156 248 424 424 587 752 1570 1570 1900 3310 2540 3380 BW   Dimensional Datas Of Ansi Class 300 LB NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in ON 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm L/L1 8.5 9.5 11.12 12 15.88 16.5 18 19.75 30 33 36 39 45 49 53 55 60 68 in (RF/BW) 216 241 283 305 403 419 457 602 762 838 914 991 1143 1245 1346 1397 1524 1727 mm L2 9.12 10.12 11.75 12.62 16.5 17.12 18.62 20.39 30.62 33.62 36.62 39.75 45.88 50 54 56 61.12 69.12 in (RTJ) 232 257 298 321 419 435 473 518 778 854 930 1010 1165 1270 1372 1422 1553 1756 mm H 16.12 17.88 20 24 31.75 39.38 47.62 55.75 62.25 67.88 77.12 86.38 102 117 122 126 130 152 in (Open) 410 453 509 612 805 1000 1210 1415 1580 1725 1960 2195 2590 2975 3100 3200 3300 3860 mm Do 8 8 10 12 14 16 18 20 25 22 24 26 29 29 32 32 38 40 in   200 200 250 300 350 400 450 500 550 550 600 640 720 720 800 800 950 1000 mm Mk) 23 35 50 71 144 209 322 482 683 950 1145 1635 2660 3090 3310 3595 3720 3985 RF   17 26 39 53 113 164 256 390 565 805 965 1410 2305 2540 2725 3055 3360 3630 BW

These valves are widely used as for Naptha and Naptha derivatives in oil refineries. With a flanged end connection, these valves are designed with API 600 standards. Its rigid and sturdy design along with low pressure across the valve make it a very formidable model in the entire product line. FEATURES   Double Flanged / butt weld end, outside crew rising stem, yoke type bonnet Back seating bush arrangement to enable re - packing under pressure Rigid & sturdy design Low pressure loss across the valve Long service life and leak tightness APPLICATION Naptha and naptha derivatives in oil refineries Water, steam, air, gas and liquids having corrosive properties Suitable for wide range of working conditions of pressure and temperature ratings

• Brand Name: Asiatic
• Material: Stainless Steel
• Media: Air

AMTECH offers motorised Gate valve -150 to 600 class in Flanged end , 800 to 2500 class in Threaded / buttweld/ socket weld end. The Gate valves are used in thermic fluid with high temprature upto 350 degree. This Gate valves are generally used for the Service remote place operation by electric , 230 V ac, single phase, three phase, AC or DC , with for on –off application, or for proposanate control applications.   Specification  

We are well known organization in the market as the foremost manufacturer and supplier of Cast Steel Gate Valve that easily finds application in various power plants and gas pipelines. The offered gate valve is manufactured by our skilled professionals using premium quality cast steel and progressive technology. Further, the provided gate valve is widely acclaimed in the market for its accurate dimensions and sturdy design. The offered gate valve is available in the market at industry leading prices. Features: Superb sealing Pressure resistance Smooth fittings Class 300 Gate Valve: OS & Y, Rising Stem, Flexible Solid Wedge, Bolted Bonnet, Threaded or Welded Seat Ring Standard Compliance: Basic Design: API 600 Face to Face Dimension: ANSI B 16. 10 End to End Dimension: ANSI B 16. 10 End Flange Dimension: 2″ – 24″: To ANSI B 16.5 26″ – 36″: To MSS SP – 44 to API 605 on request B.W. Ends to ANSI B 16.25 Shell Wall Thickness: 2″ – 24″: To API 600 26″ – 36″: To manufacturers standard Manufacturing to NACE MR – 01 – 75 on request

• Pressure: 25 Kg/cm² in working condition

Cast steel globe valve Applications : Water, Steam, Oil & Gas, Acid & Chemicals, Temperature : 200° Centigrade in Working Condition, Guarantee : 15 months replacement guarantee.

• Size: Up To 200 mm
• Design: Piston Valve Type
• Body Material: Cast Steel
• Usage/Application: Industrial
• Model Name/Number: FE 200
• Pressure Range: 17 to 32 Kg/cm2
• Temperature Range: 120 to 350 Degree Celsius

Cast steel check valve of size and configuration to suite the huge industrial as well as domestic usage of the valves. Depending upon the applications, material of construction is varying.

Scorpio steel ball valves are designed and manufactured to provide maximum service life and dependability. All Ball valves are full ported and meet the design requirements of American Petroleum Institute standard API608 &API 6D. British standard Bs5351 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of bodybonnet materials and trims.

'SANT' Drop Forged Steel Globe Valve, Reduced Bore, Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem, Backseat Arrangement, Stainless Steel Trim, Handwheel Operated.

• Body Material: Cast Steel
• Usage/Application: Water
• Size: 6 Inch
• Ambient Temperature: 60 Degree Celsius
• Driving Mode: Manual

cast steel valve, Cast Iron Gate Valve, Cast Iron Valve, Forged Steel Valve

cast steel valve, cast iron, Cast Iron Valve, Casting Product

Cast Steel Globe Valve, pfa lined valve, Y Strainers

Cast Steel Ball Valve, WCB Ball Valve

Cast Stainless Steel Valve, Motorized gate valve