Cement Autoclave Dealers in Ahmedabad

• Brand Name: DM
• Shape: Vertical
• Chamber Volume: 10-15 Litre
• Material: Stainless Steel
• Insulation Wall: Double Wall
• Automation Grade: Fully Automatic
• Usage/Application: Laboratory
• Power Consumption: 2 KW

Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch – Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031   General Descripation & Specifications:The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner   Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve    

• Usage: Cement Testing Machine
• Power: Electronic
• Port: Gujarat, India
• Model Number: TM 26

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime   This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.   Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

Laboratory cement autoclave (aim 408-2)   the laboratory cement autoclave is suitable for conducting accelerated soundness tests on cement or the autoclave expansion test. The equipment consists of a stainless steel pressure vessel with insulated outer shell, fabricated out of high quality stainless steel sheet. The pressure inside the vessel is controlled through a micro processor based pid controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, pid controller with rtd for control of heater unit.special features :   application for conducting accelerated soundness test on cement. industry civil infrastructure cement/rmc construction chemicals dams & tunnels fly ash railways sleepers real estate refractories roads, highways & bridges tiles education architecture building technology civil department geotechnical science colleges metal & material tiles & ceramics special applications fly ash traffic & transportation railways roads, highways & bridges

It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kg/cm2pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply. Supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Brand Name: Adinath
• Place of Origin: Gujarat, India
• Port: Mumbai
• Packaging Details: Product & Transport Worthy Wooden Packing
• Instrument classification: Class I

We are the main supplier of this product.

• Power: Electronic
• Usage: Cement Testing Machine
• Place of Origin: Gujarat, India
• Model Number: TM 26
• Lead Time: 4 to 6 weeks against confirm order.

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free limeThis method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator. Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch - Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031 General Descripation & Specifications The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches. Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free limeThis method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator. Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch - Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031 General Descripation & Specifications The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches. Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

• Material: Stainless Steel
• Shape: Vertical
• Chamber Volume: 5-10 Litre
• Mount Type: Table Top Autoclave
• Insulation Wall: Single Wall
• Installation: Yes
• Power Consumption (KW): 1 KW

• Design: Rectangular & Cylindrical Type
• Working Pressure: Variable 5 to 30 PSI
• Working Temperature: 121°C (up graded up to 135°C)
• Internal Chamber: Corrosion Resistant Stainless Steel
• External Chamber: Corrosion Resistant 304 Grade Stainless Steel, Painted
• Door: Single or Double Doors w/ automatic pressure locking
• Insulation: Glass wool Fiber
• Sterilization Period: 20 to 25 Minutes
• Steam Exhaust: 5 to 7 Minutes
• Boiler: With ISI marked water immersion type industrial heating elements, Pressure stat,
• Safety Valve: For excess pressure inside jacket and steam generator
• Thermometer: Dial Type, indicates sterilization temperature
• Mechanical Time w/ Alarm: Regulates sterilization time and activates buzzer when sterilization cycle completes
• Vacuum drying: Optional
• Auto add water: Optional
• Door interlock: Optional
• Other Accessories: Automatic Pressure control switch, water cut-off, Temperature indicator
• Standard Accessories: SS304 Sterilizing tray x 1pc Water level glass tube x 2pcs Heating element x 1pc Silicone door seal x 1pc Water filter x 1set
• Caster Wheels: Optional
• Power Supply: 220 Volts / 440 Volts

• Features: Rust proof stainless steel pressure vessel,Specially designed Steam Safety Valve, pressure control switch and Temp. control switch – Triple Safety precautions for operator safety
• Inside chamber dimensions: 10.5 cm dia x 40.5cm height.
• Rating: 3000 watts
• Pressure range: 21 kg/cm2
• Least Count: 04 kg/cm2
• Temp.range: 215 deg C
• Power supply: 230 Volts AC Single Phase 15 Amp

Cement Autoclave, cement colours, cement mortar, coromandel cement

Cement Autoclave, Transit Vernier Theodolite, Proving Rings