Chemical Process Pumps Dealers in Ahmedabad

• Type: Pump
• Application: Chemical Supply
• Weight: 100-150kg
• Color: Blue
• Voltage: 220V
• Automatic Grade: Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Warranty: 1year
• Pump Power: 10Hp, 2Hp, 3Hp, 5Hp, 7Hp

Product Features Casing Bonus casing thickness: Class 150 pumps feature Class 300 wall thickness as standard; increased reliability and maximized casing life. Top centerline discharge for air handling, self-venting. Back pull-out design for ease of maintenance. Integral casing feet prevent pipe load misalignment—maximized seal and bearing life. Serrated flanges standard for positive sealing against leakage. Meets ANSI B16.5 requirements.Class 150 FF flanges standard, optional Class 150 RF, 300 FF/RF. Fully Open Impeller Acknowledged best design for CPI services—solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure. Sealing Flexibility Wide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime. Positive Sealing Fully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier. Ductile Iron Frame Adapter Material strength equal to carbon steel for safety and reliability. Continuous Performance Original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings. Heavy Duty Shaft And Bearings Rigid shaft designed for minimum deflection at seal faces—less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve. Extra Large Oil Sump Capacity Increased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer. Rigid Frame (and Casing) Feet

• Brand Name: JB PUMPS
• Application: Chemical / Paper / Hot Or Cold Water
• Model Number: JBCP

With firm commitment to quality, we are engaged in offering Centrifugal Process Pump. Our pumps is designed as per international quality standards.Our pumps are used in a variety of industrial applications. Widely used for chemical, petrochemical, textile, food etc. Capacity up to : 750 m³/Hr Temp. up to : 250° C TDH up to : 140 MLC Working Pr. up to : 40 Bars Delivery Size up to : 250 mm Industries Covered :- Pharmaceuticals & Chemical : Oil Extraction Plants Pulp & Paper Industries : Waste Oil Refining Plants Starch Industries : Air-Conditioning / Heating Plants Effluent Treatment Plants : Cooling Tower Water Circulation Dyes & Intermediates : Solvent Transfer RO & DM Water Plants : Thermic Fluid Circulation Material of Construction : Pumps are manufactured in variety of materials such as Stainless Steel -SS316/304 Constructional features : Pumps are as per The design is of back pull out type. Large variety of models are available to operate at 1450 rpm and 2900 rpm at 50 Hz and 1750 rpm and 3500 rpm at 60 Hz. Casing : The casing has axial suction and top center line delivery. Smooth hydraulic passages ensure high efficiency. Normal design is for foot mounted pumps. Impeller : The impellers are of enclosed type and semi-open impellers can also be supplied. Hydraulic balancing of impellers is achieved either by back wearing. The impellers are statically and dynamically balanced. Shaft : The shaft is supported by two anti friction bearings to take residual axial thrust and prevent axial float or radial run out. It is

• Capacity up to: @750 M3/Hr.
• Temp. up to: 250° C
• TDH up to: 140 MLC
• Working Pr. up to: 40 Bars
• Delivery Size up to: 250 mm
• Materials : Stainless Steel, Nickel Alloys, Cast Iron & special Alloy Cast Irons, SG Iron / Ductile Iron, Carbon Steel / WCB, Bronze / Alluminium & Various Non Ferrous Alloys

• Head: 35m
• Temperature: 80 Degree Celsius
• Voltage: 415 V
• Country of Origin: Made in India
• Material: Cast Iron & Stainless Steel
• Capacity: 25m/h
• Size: 65x50mm
• Finishing: Paint Coated
• Motor Power: 1.5 kW
• Motor Phase Type: Three Phase
• Brand: Hindustan Pumps
• Material Grade: SS316
• Frequency: 50 Hz
• Motor Horsepower: 2 hp

• Brand Name: Radial Pumps,Radial Pumps
• Material: C. I, C.S, SS-304 / 304L, SS316 / 316L, Bronze, Alloy-20, CD4MCU Hast alloy B & C, etc. Duplex stain
• Driven Type: Electric
• Usage: Industrial
• Type Of End Use: Industrial
• Certification: ISO 9001:2008 Certified, CE Certified
• Type: Horizontal Centrifugal Process Pump
• Warranty: 1 Year
• Head: Up to 150 mtr
• Temperature: Up to 350°C
• Pressure: Up to 15 Kg/cm2
• Model: RCP Series
• Capacity: Up to 2200 M3/hr
• Discharge Size: 25 mm to 300 mm
• Speed: Up to 3500 rpm

In air cooled pump isolated liquid is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly. Our unique design allows the motor and bearing environment to be at a much lower temperature than the process fluid. Enabling the use of standard bearing and motor insulation significantly reducing both first and long terms operating.

• Brand Name: Omicron
• Cooling Method: Air cooled
• Finishing: Paint Coated
• Material: Stainless Steel
• Motor Phase: Three Phase
• Power Source: Electric

Catering to the ever-evolving packaging requirements of the clients, we make certain that our professionals use only the finest packaging material to circumvent loss during transit. We have installed a large storage facility wherein we keep a large stock of the offerings. This facility helps us in keeping the entire lot away from the damaging factors like moisture, sunlight, dust, rain, etc.

• Head: 150 mtr ( 15 KG/CM2)
• Motor Speed: 1440/2900 RPM
• Capacity: 250 m3/Hour
• M.O.C: CI, SS 304 , SS 316 , WBC
• Connection Type: Flange Ended
• Impeller: Closed /Semi open Type
• Sealing Type: Gland Packing /Mechanical Seal Fitted
• Maximum Temperature: 200- 300 Degree
• Application Used: Water Transfer, Chemical Transfer, Solvent, Oil, High Acidic Chemical Transfer, Hot Water Transfer

•  Capacity  :     Up to 100 M3/h
•     Head:     Up to 35mtr
•     Temperature:     Up to 90c
•     Speed:     Up to 2800 RPM

STANDARD FEATURE  › VOLUTE CASTING HEAVY DUTY WITH INTEGRAL FOOT AND MULTI - RIBBED DISCHARGE FLANGE PROVIDED SUPERIOR RESISTANCE TO PIPE LOADS AND IMPROVES RELIABILITY BACK PULLOUT DESIGN ALLOWS FOR REMOVAL OF THE ROTATING ELEMENT WITHOUT DISTURBING THE CASING PIPE WORK OF MOTOR TO SIMPLIFY ROUTINE MAINTENANCE. › IMPELLER DUPLEX STAINLESS CASTED, OPEN IMPELLER FOR HIGH EFFICIENCY PERFORMANCE, LOW RUNNING COST AND LONG LIFE, IMPELLER BACK VANES AND SHROUD DESIGN PROVIDES AXIAL BALANCE WHICH REDUCES MAINTENANCE AND DOWNTIME COST BY EXTENDING SEAL AND BEARING RELIABILITY. › SHAFT SEAL AMT - SERIES PROCESS PUMPS CAN BE SUPPLIED EITHER WITH GLAND PACKING COMPATIBLE TO THE PUMPED LIQUID OR WITH MECHANICAL SEAL IN THE STUFFING BOX HAVING SUITABLE CONNECTION / STAMPING FOR SEALING / SLUSHING / CIRCULATION / COOLING ETC.   APPLICATIONS  › CHEMICALS, PETROCHEMICALS. REFINERIES, SUGAR, FOOD STUFFS, PAPER, DYES, TEXTILES, RUBBER, ENVIRONMENTAL ENGINEERING, HANDLING OF HYDROCARBONS, ORGANIC AND INORGANIC CHEMICALS, CONDENSATE DM WATER ETC.   SHAFT  › MADE OF EN-8 STEEL & S.S 304, S.S 316 SPECIFICATIONS, SAMPLE SIZE TO TRANSMIT POWER WITHOUT DISTORTION OR VIBRATION. » BEARINGS  › ANTIFRICTION BALL BEARINGS, SINGLE ROW DEEP GROOVED HEAVY DUTY SELECTED TO PROVIDE MAXIMUM SERVICE. OIL LUBRICATION ARRANGED BY OIL POINT. » STUFFING BOX  › DEEP GLAND BOX WITH GRAPHITE PACKING. PACKING IS LUBRICATED BY LANTERN RING WITH GREASE.   » ROTATION  › MARKED WITH ARROW ON THE CASING OF EACH PUMP. CHECK BEFORE COUPLING WITH PRIME MOVER. » BASE PLATS  › SUITABLE BASE CAN BE SUPPLIED WITH THE PUMP.   » MATERIAL OF CONSTRUCTION  › C.I. BRONZE, S.S 304, S.S 316 & ALLOY-20 ETC.

Operating range: capacity: up to 42 m3hr head: up to 46 meter discharge size: dn 25 to 50 mm temperature: up to 140°c speed: up to 3500 rpm pressure: up to 4.6 kgcm2 applications:  organic inorganic chemical intermediates industries.  pulp & paper, sugar, salt, starch industries.  food, textiles, laminate, cement & steel industries.  pharmaceutical, dyes, textiles, kerosene, diesel & other solvents, caustic.  etp, stp & waste water treatment plant.  eva-operator, scrubber application.  filter press feeding, slurry transfer.  rubber, general industrial services etc.... Materials of construction:  ss-316, ss-316 l, ss-304, ss-304l  duplex stainless steel  super duplex stainless steel  cast bronze, cast steel, cast iron  hastalloy - b & c, alloy-20 etc.....

• Type: Chemical Process Pump
• Weight: 50-100kg
• Color: BLUE
• Voltage: 220V
• Condition: New
• Automatic Grade: Manual
• Power: AS PER REQ.
• Warranty: 1year
• Pump Power: AS PER REQ
• Pump RPM: BOTH
• Country of Origin: India
• Brand Name: ACTIVE
• Application: AS PER YOUR REQ.

We are ISO 9001: 2008 Company, leading manufacturers of Chemical Process Pumps since the last 20 Years has carved for it self a niche in pumping and fluid control system. Centrifugal Metallic & Polypropylene pumps range specializes in virtually all forms of fluid transfer be it clear, corrosive liquids, slurry, solvent, etc. We have an answer to all types of fluid handling pumping related problem. Our Axial Flow Pump, also known as Propeller pump is best solution for low head, high capacity pumping. Range of Chemical process pumps comply with ISO, DIN & API standard to have high efficient technology to manufacture metallic pumps and polypropylene pumps for highly corrosive media like sulfuric acid, hydrochloric acid, highly corrosive slurry, solvents, chemicals, etc.

• Temperature: 110 Deg C 
• Capacity: Up To 80 m3/hr
• TDH Head: Up To 62 mtr
• Pump Sizes: DN 25 mm TO 50 mm
• Speed (at 50 Hz): 1450 / 2880 rpm
• Speed (at 60 Hz): 1750 / 3500 rpm

High pressure rousing fluid is transformed to high rapidity .We Are leading chemical process pumps  are High rapidity fluid entrains and transfer piece of its momentum to the induced fluid. These mixed fluids at low rapidity enter the diffuser, which is so produced that it regularly converts  the rapidity energy to force energy and discharge them to a pressure higher than pressure but lower than original motivating fluid pressure. Our complete range of Cantiliver Chemical Process Pumps is affected in conformity with set manufacturing principles. These Chemical Process Pumps are known for their high competence and stability between the clients. We present Chemical Process Pumps in diverse requirement custody in mind the obligation of varied industries.     Salient Features of Cantilever Chemical Process Pump:- Absolute dependability. Strong and long working life. Can be completed from many decay resistance material. Easy conduct even of large suction quantity. low capital, installation and maintenance costs. Dense and light weight. No affecting part to wear or to go out of order. Simple in procedure. No seal and lubricate liquids are compulsory as in automatic system as per eg: Water ring vacuum pumps & high vacuum pumps.  

• Application: Used in continues processing acid pickling line in steel industries, 2 For filteration and pressuris
• Fuel: Ele
• Model Number: Process pumps ppc-100,ppc120,ppc130,ppc160r , ppc 160,ppc170

Ppc series pumps are designed and manufactured by deval enterprise to meet customer specifi requirement withoptimum standardization. The company's wealth of the experience goes in to the design and manufacture of moulded polypropylene corrosion resistant pumps.

"Flowchem" Series PPF pumps are "Centrifugal Process Pumps" in Back Pull-out Construction , Horizontal, Foot Mounted, Single stage, End suction and Top Centerline Discharge, confirming to DIN 24256 ISO 2858, standards and in general confirming to API 610 as well.Impellers are provided either with Back Vane or Back Wear Ring to minimize Axial Thrust and Gland Leakage.

Design: Horizontal, radial split, volute casing pumps according to ANSI B73-1 specifications with open impeller, end suction, top centre line discharge. Simple external axial adjustment for impeller wear. Back pull out design enables to remove the rotor without disturbing the pipelines. If a spacer coupling is used, the motor does not have to be removed from the base plate. Only four bearing beds cover the entire 32 models. This means that the shafts, sleeves, bearings, and bearing beds are identical in and interchangeable for a large number of pump sizes

• Application: Chemical Supply
• Weight: 20-50kg
• Voltage: 220V
• Warranty: 1year
• Pump RPM: 1400
• Body Plastic: Plastic

• Type: Chemical Process Pump
• Application: Chemical Supply
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Pump Power: 10Hp, 2Hp, 3Hp, 5Hp, 7Hp
• Pump RPM: 1400, 2800
• Flow: Up to 550 M3/Hr
• Speed: up to 3600 RPM

• Type: Centrifugal Pumps
• Application: Oil Industries , Chemical Industries
• Temperature: 250 Degree
• Color: Blue
• Brand Name: Amee
• Model Number: ACP
• Capacity: 200 M3/hr
• Casing Pressure: 3 kg

• Type: Chemical Process Pump
• Application: Chemical Supply
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Warranty: 1year, 2years

We are the main supplier of this product.

• Type: Chemical Process Pump
• Application: Chemical Supply
• Weight: 100-150kg, 150-200kg, 200-250kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years, 5years
• Pump Power: 10Hp, 2Hp, 3Hp, 5Hp, 7Hp
• Pump RPM: 1400, 2800

• Pressure: 3.8 Kg/cm2
• Brand Name: AK Industries
• Material: Stainless Steel
• Motor Power: 12 HP
• Pump Size: 50/315 mm
• Suction: 80 m3/hr
• Speed: 1440 RPM

Seal Less Pump A seal less fluids pump supplier and pumps are very effecient plasto series give a defferent types of solutions in making pumps, Seal Less pumps employs Magnetic drive arrangement for rotating the impeller. Ideal for handling corrosive chemicals, axeial flow pumps, solvents, petrolium products, kerosene pumps, pharmaceutical and food syrups etc. These pumps are vastly used in Chemical plants, Electroplating plants, Textile mills etc. Std. monoblock pumps are available with Glass Filled PP moc and TEFC Non Flameproof motor. Optional availability in PVDF and SS 316 construction with Flame Proof motors also.

Our range of Pumps is manufactured by adopting latest technological development. Engineered to meet the perfection these are designed with utmost care and assure longevity .Further its compact & light-weight structure allows it to be easily placed inside original equipment.