CI Valves Dealers in Ahmedabad

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch
• Material: Cast Iron
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Durable
• Brand Name: UNIVERSAL
• Size: 15MM TO 50MM
• Type: Cast Iron Ball Valve

CAST IRON THREE PIECE DESIGN BALL VALVE FULL BORE WITH S.S WORKING PARTS RENEWABLE TEFLON SEATS AND SEAL, BLOW OUT PROOF STEAM, SCREWED ENDS

• Material: Cast Iron
• Finishing: Polished
• Packaging Type: Carton
• Media: Water
• Overall Length: 6-10 Inch
• Voltage Range: 24 V AC
• Number Of Way: 2way
• Usage: Water Fitting
• Specialities: Investment Casting, Heat Resistance, Casting Approved

• Country of Origin: India
• Size: 1inch, 2inch
• Type: Ci Valves
• Material: Cast Iron
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting
• Color: Blue
• Pattern: Plain
• Pressure: Medium

Pinch valves, offered by our company, are the modified version of laboratory pinchcock in which rubber sleeve is protected under the casting made of cast iron. The main advantage of Pneumatic Pinch Valves is that the fluid passing from it does not come in contact with its metal parts except the sleeve. This property makes it corrosion resistive against the action of various fluids. Open Body Pinch Valves assure the smooth flow of water like pipeline and their collar sleeve eliminates gasket. Pinch valve is user friendly and can be operated easily as compared to other wheel operated valves. This valve allows positive control over flowing media because of its in between stoppage that gives desired throttling. These pinch valves are extensively used for handling corrosive slurry, liquid with solid suspensions, abrasive media, and many others. We offer pinch valve in best application range with flange as per BS, DIN, ASA & IS dimensions, and ranging between 15mm to 300mm. We are known widely as one of the proficient Pinch Valves Exporters and Suppliers. General Features & Highlights Seat Less & Glandless ValvesField Replicable Elastomer Sleeve.Elastomer Sleeve Having Four Reinforced LugsFlanged Ends & Drilled to Din, Ansi, Bs-10, Is, Etc.this Valve Incorporates allthe Design Modifications Based On Our Experience & is of Study Construction to Handle Abrasive Corrosive Media. BRIEF DETAILS OF PINCH VALVE Pinch Valve is a Seat less & Glandless valve.Pinch valve is a modified version of laboratory pinchcock. A rubber sleeve is protected under a cast iron casting.The fluid passing through do not come in contact with either body covering or any other metal parts of the valve except the sleeve.Hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid.The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket.The valve is simple hand wheel operated of rising wheel type. Therefore the operation of the valve is just simple as other wheel operated valve.The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. Applications Pinch valve finds its best application in handling corrosive slurry, abrasive media, liquid with solid suspensions and many others, which are difficult to handle with seat valve. Range The flange of the pinch valve can be supplied in accordance to BS, DIN, ASA & IS dimensions The range for the valve is from 15 mm TO 300 mm. Actuation The valve can be supplied with Electrical and pneumatic actuation. Operating Manual OF PINCH VALVE THE PINCH VALVE is a modified version of the laboratory pinchcock. A rubber sleeve is protected under a Cast iron or Aluminum split body casting. The valve is a simple hand wheel operated of rising wheel type. The operation of the valve is same as other hand wheel operated valve, it closes when moved in clockwise direction and opens when moved in anticlockwise direction. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media. The flow through the valve is same as that of a pipeline, when the valve is in fully opened condition. Further, the rubber sleeve eliminates the need of a gasket. PRELIMINARY PRECAUTION On receipt of the valve please check the position of the valve, as it is advisable to keep the valve in fully opened condition. Also check the position of the travel limit nut, if found loose then tighten the set screw of the nut. INSTALLATION The valve can be installed without any gasket unless it is required for some specific purpose. Tighten the nut of the flanges evenly & equally, but avoid too much tightening. After installation check the free movement of the upper & lower pinching bar by opening & closing the valve. The valve is then ready for the service it is installed for. MAINTENANCE If the valve is found leaking through the seat after sometime even though in fully closed condition, then set the travel limit nut by just taking it 1 or 2 threads above & then tighten. This will allow more room for traveling of rubber sleeve & ensure the valve to zero leakage. This problem sometimes occurs when the sleeve is slightly worn out, when used under abrasive condition. Further, The Rubber sleeve of the valve up to 2” (50mm) have a single lug on either side and it goes into the hollow passage of the pinching bar where it is fixed with the lug clamping screws. In the higher sizes above 2” the sleeves have two lugs on either sides and is fitted overlapping the pinching bar. DISMANTLING THE VALVE & REPLACING THE RUBBER SLEEVE When the rubber sleeve is ruptured or totally worn out then it is to be replaced with a new one. In this case first dismantle the valve by following the instructions. Remove the hand wheel.Open the Tie Bar nuts.Disconnect the spindle from the Horseshoe connection and remove it completely with the bridge.REMEMBER not to temper the set screw of the yoke bush, unless if required it should be completely tight.Open out the nuts & bolts of the split body of the valve.Remove the screw of the lugs from both the pinching bars.Now fit the new rubber sleeve & reverse the operation to assemble the complete valve. NOTE It is advisable to keep a spare rubber sleeve for maintenance purpose, considering the self life of the Rubber as six months when packed & stored in dark. The Pinch valves should be stored in fully open condition only. We also offer complete spares of the valves, but request you to place your order a week in

• Size: 40 MM TO 600 MM
• Country of Origin: Made in India
• End Connection: FLANGED
• Material: Cast Iron
• Corrosion Resistance: Yes
• Surface Treatment: Paint Coated

• Brand Name: MEGA VALVES
• Material: Cast Iron
• Power: Manual
• Pressure: PN 10/16
• Color: Blue, YELLOW
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Technics: Gear Operated
• Certification: ISI Certified
• Feature: Casting Approved
• Size: UP TO 24 INCH
• Type: TEFLON
• Media: WATER / OIL / GAS
• Temperature Of Media: UP TO 180 D
• Country of Origin: India

• Material: Cast Iron
• Pressure: High
• Temperature Of Media: High Temperature
• End Connection Type: Flange
• Automation Grade: Manual

From Ahmedabad(India), India, we delight our valuable patrons by providing quality-centralized products. Advanced transportation facilities, efficient workforce, on time delivery of the products make us stand out from the crowd.

• Size: 2 inch
• Brand Name: Virco
• Material: Ci/stainless steel
• Application: Water;oil;gas

• Size: 15mm to 50mm
• Media: Water /Oil / Steam / Air /Gas
• Body: Cast Iron/ Cast Steel
• Bonnet: Cast Iron
• Wheel: Cast Iron
• Diaphragm: Epdm / Ebonite Rubber
• Operation: Hand Wheel Operated
• Hyd Test Pressure: 10 Bar
• Seat Test Pressure: 85PSIG, (6KG CM2 )
• Temperature: 85 Degree C
• Ends Connection: Flange End Table D /150# ( ANSI B 16.5 )

• Media: Water
• Material: Cast Iron
• Brand Name: Radiant Flow
• Automation Grade: Manual

• Size: Standard
• Material: Cast Iron
• Application: Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Durable
• Number Of Way: 2way
• Pack Type: Carton Box

• Technics: Gear Operated, Hard Sealing
• Port Size: 0.1mm-5cm, 2cm-50cm, 51cm-60 Cm, 6cm-20cm
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Blue
• Pressure: Triple Offset Butterfly Valve
• Power: Hydraulic, Manual, Solenoid
• Material: Cast Iron

hello sir,

• Size: 21/2"
• Material: Cast Iron And Also Available In Cast Steel, Stainless Steel
• Corrosion Resistance: Yes
• Technique: Hot Rolled
• Packaging Type: Box
•  :  

• Size: Multisize
• Material: Cast Iron
• Application: Oil Fitting
• Weight: 10-15kg
• Feature: Blow-Out-Proof, Casting Approved
• Pressure: High
• End Connection: Screwed / Socket Weld / Flanged
• End Connection Type: Flanged
• Finishing Type: Polished
• Automation Grade: Manual
• Surface: Galvanized

• Material: Cast iron
• Color: Dark grey
• Application: Oil Fitting, Water Fitting
• Size: 25-100mm
• Feature: Good Quality
• Weight: 5-25kg
• Country of Origin: India
• Condition: New
• Pressure: High, Medium
• Type: Two Piece Ball Valves

Cast Iron Ball Valves offered come in proper finishing so as to ensure smooth as well as leak free performances. These are long lasting valves are widely used for irrigation and domestic plumbing purposes. It has cast iron structure with use of S.S. ball & spindle, MS lever & nut as well as other components. Further, these feature flawless and free mechanical operating that make these suitable for water, agriculture, domestic, industrial applications. Features: C.I. ball valves designed Long lasting valves Flawless and free mechanical operating Finding suitability for water, agriculture, domestic, industrial applications Cast iron cast body Technical specifications: Bolted end connector 3 Piece design

 Cast Iron Butterfly Valve, Wafer Type, Rubber Lined Body, Conforming to IS 13095 : 1991, Rating PN 1.0 / Class 125, Regulating Type, Hand Wheel & Gear Box Operated, ISI Marked.

• Material: C.I / C.S / SS 304 / SS 316 & More
• Size: 1/2
• End Connection: Screwed / Socket Weld / Butt Weld / Flanged End
• Temperature Of Media: High Temperature, Medium Temperature, Low Temperature
• Automation Grade: Hand Wheel Operated
• End Connection Type: Screwed / Socketweld / Flanged End

• Material: Cast Iron
• Type: Square body
• Brand Name: JDM
• Media: Air, Water, Gas , Steam
• Structure Type: Needle
• End Connection Type: Screw End
• Size: 06MM to 50MM
• Shape: Square
• Rating: Class 150

Gate Valves are Outside Screw & Yoke, Bolted bonnet & with Rising stem,The “STRAIGHT THROUGH BORE” design assures minimum turbulence, erosion and resistance to flow caused by pockets & recesses. Gate Valves are mainly used where minimum pressure drop is a requirement.