Circuit Breaker Dealers in Vatva, Ahmedabad

• Mounting Type: Wire rope
• Application: Garage,Industrial
• Condition: New
• Dimension: Standard
• Accuracy: +-0.1% FS
• Output Voltage: Universal

Details : All metal multidirectional wire rope isolators Combined shock and vibration isolation from 5 Hz upwards Interface - one fixture point to equipment and two fixture points to foundation (reversible) Exceptional reliability and lifetime Temperature range - -290°F to +570°F Static loading per isolator - 0.22 lbf to 1.1 kipf Damping ratio - 15-25% (viscous equivalent)

Krish Engineers Is Manufacturer & Supplier Of Medium Frequency Water Cooled Capacitors In Ahmedabad, Gujarat.  Scope Medium Frequency Water Cooled Capacitors From 1 KV Up To Maximum 5000 Volts, To Maximum 7000 KVAr And Frequency Up To 50 Kilocycles For Indoor Use. with Dead Casing, Open Terminal (2 Bushings). with Live Casing, Open Terminal (1 Bushing). Applicable Standards IEC 60110-1 Capacitors For Induction Heating & Melting Application. IS 9251 Capacitors For Inductive Heat Generating Plants Operating At Frequencies Between 40 And 24000 Hz DIN EN 60110-1 Power Capacitor For Induction Heating Installations. VDE 05650-9:1999-09 Ratings Voltage: Up To 5kV Output Capacity: Up To 7200 KVAr Frequency: Up To 50 KHz Mounting: Suitable For Both Horizontal / Vertical Container: Imported Embossed Aluminium Sheet. Construction: Live / Isolated (Dead) Container Safety Over Pressure Dis-connector Provided With NC Contact. Tests Each And Every Medium Frequency Water Cooled Capacitors Are subjected To Routine Tests In Accordance To IEC 60110-1. Measurement Of Capacitance. Measurement Of Dielectric Loss Angle @ 50Hz. Voltage Test Between Terminals Voltage Test Between Terminals & Container Sealing Test Features: Following Are The Saliet Features Of Our Offered Medium Frequency Water Cooled Capacitors Low Losses < 0.8 Watts Per KVAr World Class Raw Materials Manufactured In State Of Art Infrastructure Volume Optimized And Highly Reliable Trouble Free Long Life Performance Environmentally Friendly. Quality Management System ISO 9001 Accredited ByTUV. Safety Regulations When Installing The Equipment, Relevant IEC Or VDE Recommendations Shall Be Observed. Quality Management System ISO 9001, BS 5750 Qualifications EDF (HN 54-5-05), CSA Altitude Medium Frequency Water Cooled Capacitors are Designed To Operate At Altitudes Not Exceeding 1500 Mtrs. Impregnant The Medium Frequency Water Cooled Capacitors are Impregnated With A NON-PCB Based Fluid Which Is Jarylec C-1 01. This Dielectric Fluid Is Environmentally Acceptable, Eliminates Health And Environment Hazards. Dielectric An Imported All Film Dielectric Is Used And Consists Of Polypropylene In The Form Of Bi-axially Oriented Film, Hazy On Both Sides, And In 2 Or 3 Layers With End And Edge Folded Aluminum Foil As Electrodes. Dielectric Losses Dielectric Losses@ 50 Cis In Fresh Condition Are Approx. 0.2 To 0.3 Watts / Kvar Up To 5 KHz, And 0.5 Watts / Kvar Up To 50 KHz And Reduce After 500 Operating Hours To A Stable State. The Dielectric Losses, Depending On Capacitor Design, Shall Be Added To Losses Caused By: Internal Discharge Resistors Internal Connections Permissible Overloads Maximum Permissible Voltages Capacitors Are Designed For Operation At Voltage Levels According To The Following Table. The Amplitudes Of The Over Voltages That Can Be Tolerated Withoutsignificant Deterioration Of The Capacitor Depend Up On The Duration, The Total Number And The Capacitor Temperature. Discharging Each Capacitor Unit Shall Be Provided With Means Of Discharging To 75V Or Less. Switching Over Voltages The Residual Voltage On A Capacitor Prior To Energization Shall Not Exceed 1 0% Of The Rated Voltage. Maximum Permissible Currents Capacitor Units Will Be Suitable For Continuous Operation At An R. M. S Current Of 1.30 Times The Current That Occurs At Rated Sinusoidal Voltage And Rated Frequency, Excluding Transients. Manufacturing And Quality Control Imported Bi-axially Oriented Double Hazy Polypropylene Film And 99.9% Pure Aluminum Foil Are Used As Dielectric And Electrode. Wrinkle Free Winding Of The Elements Is Carried In An Class 100 Environment On A Semi Automatic Winding Machine With Edge And End Folding Of The Aluminum Foil. This Is To Eliminate Overvoltage Stress At The Edges Of The Buried Area Of The Foil. Each Wound Element Is Tested For Dry DC Overvoltage With Stand For Pin Holes And Adequacy Of Margins Between AI Foils. Numbers Of Elements Are Interconnected In Series - Parallel To Achieve The Desired Capacitance And Designed Voltage Rating Of The Capacitor. The Dry Pack Is Wrapped With Several Layers Of High Quality Insulating Paper Before Inserting It Into A Pre Treated / Degreased Aluminum Container And The Top Lid Is Welded By Semiautomatic Pulsed TIG Welding Machine. The Aluminum Sheet Used For Fabricating Containers Is Imported, Manufactured Of A Special Alloy With Its Surface Embossed. All Metal Parts Copper And Brass Are Silver Brazed To Ensure Homogeneous Joint. Porcelain Bushings Of Desired BIL Are Leak Proof Fitted On The Lid As Required. The Terminals Are Manufactured From Extruded Brass And The Water Cooling Pipe Is Of 99.99% Pure Electrolytic Grade Annealed Copper And Pressure Tested For Leaks Before Fitting On The Pack. On Specific Request Of Client, Imported Over Pressure Switches Are Also Fitted On The Capacitors. All The Joints Are Tightened With Torque Wrench And Are Locked To Ensure They Remain Perfectly Tight Always. The Capacitors Are Then Loaded In A PLC Controlled Autoclave For Uniform Heating @85°C And Drying Under Vacuum Of 0.001 Torr For A Given Period. After Confirming The Quality Of Drying By Precision Online Monitoring Instruments, The Capacitors Are Then Impregnated Under Vacuum With Highly Purified And Degassed Jarylec C- 1O1. The Capacitors Are Then Subjected To All Routine Tests In Accordance To IEC-60110-1.   Un (V R.m.s) Maximum Duration Observation 1.00 Continuous Highest Average Value During Any Period Of Capacitor Energization 1.10 8 H In Every 24 H System Voltage Regulation And Fluctuations. 1.15 min In Every24 H System Voltage Regulation And Fluctuations. 1.20 5 Min Voltage Rise At Light Load 1.30 1 Min - Life Expectancy Based On The State Of Art Plant& Machinery, Quality Of Raw Materials Used, Manufacturing Under Strict Quality Control And Process Using Precision On Line Instruments, And Elevated Over Voltage Test Results Under Extreme Temperatures, Capacitors Are Assured Of Minimum 20 Years Life. Electrical Tests Each And Every Medium Frequency Water Cooled Capacitors Are subjected To Routine Tests In Accordance To IEC60110-1. Measurement Of Capacitance. Measurement Of Dielectric Loss Angle @ 50Hz. Voltage Test Between Terminals 4 Vn For 10 Secs. Voltage Test Between Terminals& Container 2.15 Vn. Sealing Test @ 80°C For 2hrs.    

• Driven Type: Electric
• Condition: New
• Application: Industrial Use

A lightning Arrester is a metal rod or metallic object mounted on top of a building, electrical power systems and telecommunications systems electrically bonded using a wire or electrical conductor to interface with ground or "earth" through an electrode, engineered to protect the building and the electrical power system from the damaging effects of lightning strike. If lightning targets preferentially strike the rod and be conducted to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution. The typical lightning arrester has a high-voltage terminal and a ground terminal. A lighting arrester made from GI rod and copper bounded rod in form of single point and multipoint's system.

• Material: Polyester
• Usage/Application: solar
• Number Of Pins: 2 pol,3pol
• Size/Dimension: 200x200

• Rating: 630A
• Poles: 3P & 4P
• Version: Fixed – Manual & Electrical and Drawout – Manual & Electrical

FEATURES ⇒ Breaking capacity upto 100kA ⇒ Dual spring balanced mechanism ⇒  Rugged steel construction ⇒  Wide range of accessories ⇒  High electrical & mechanical life ⇒ Modular construction with most compact dimensions ⇒  Fastest opening & closing time ⇒ Maintenance friendly features: slow closing, pole replacement, easy accessories fitment ⇒ Multiple option to choose protection release: thermal magnetic, micropro – communication compatible with RS485 modbus protocol

• No.of poles: 1 Pole - 4 Pole
• Rated current: 1 Amp - 200 Amp

Since, we have a widespread supply chain network; we can satisfy buyers by catering to bulk requirements and making delivery within the stipulated time. The company is deeply rooted in Rajkot(India) and is acknowledged for its fair pricing policy and professional attitude.

• Type: Air Circuit Breakers
• Brand Name: Anchor, Bosch, Haveels, Hitachi, Orpet, Sentai
• Material: Ceramic, Hard PVC, LDPE, Plastic, PP, PVC
• Color: Black, Creamy, Grey, White
• Condition: New
• Power Source: Electric
• Feature: Best Quality, Durable, Easy To Fir, High Performance, Shock Proof, Stable Performance, Use Friendly, Water Proof
• Warranty: 1year, 2years, 3years

A lightning Arrester is a metal rod or metallic object mounted on top of a building, electrical power systems and telecommunications systems electrically bonded using a wire or electrical conductor to interface with ground or “earth” through an electrode, engineered to protect the building and the electrical power system from the damaging effects of lightning strike. If lightning targets preferentially strike the rod and be conducted to ground through the wire, instead of passing through the building, where it could start a fire or cause electrocution. The typical lightning arrester has a high-voltage terminal and a ground terminal. A lighting arrester made from GI rod and copper bounded rod in form of single point and multipoint’s system.

A new concept for increased reliability of Circuit Breaker operations - CBM provides an integrated solution for control, monitoring and metering of a CB. The design is based on latest state - of - the - art technology using 16 bit digital signal controller which ensures error free operation, enhances the system reliability. CBM is user friendly equipment with all programming and control functions through the front facia.   Features Six digital fault inputs & four relay outputs plus two separate solid state outputs for trip & close operation. Field programmable control logic between fault inputs & relay outputs. Field programmable current & potential transformer ratios. Local / remote mode selection. Inbuilt anti pumping logic. Inbuilt master trip relay logic. Inbuilt trip circuit supervision logic. Inbuilt operation counter & fault counter Inbuilt 3phase under & over voltage protection (optional). Front panel keyboard for programming with LCD display. Replaces all electromechanical switches Replaces analog / digital meters Key Advantage: Reduction in wiring. Reduction in panel space. High reliability.  Control Functions: - CB Close / Trip along with Master trip relay function. - Anti pumping - Trip Circuit Supervision. Monitoring Function: - Common alarm Scheme & 6 window annunciater. Measurement Function: - 3ph Voltage & Current. - Power Factor - kW, kVA & kVAR. - Operation Counter & Fault Counter. Indications: - VCB ON - VCB OFF - Spring Charge Indication - VCB in test - VCB in service

  AutomaticTransferPanel ATS Panel. These panels are used for selecting any one line between two sources of power, usually between the generator set and main supply. We are offering our products as per client requirement.Automatic Transfer Swithc Panel (ATS). These panels are used for selecting any one line between two sources of power, usually between the generator set and main supply. We are offering our products as per client requirement.

• Mounting Type: Horizontal
• Application: SIGNAL ISOLATION
• Model No.: 9000U
• IP Rating: IP20
• Features: Rugged & accurate 4 wire isolator, Three port isolation, Compact DIN rail enclosure, Excellent long term stability, High CMRR and NMRR

• Brand Name: Schneider

We have created a strong foothold in the field of exporting and supplying Schneider Switchgear. The Schneider Switchgears offered by us are specially designed by highly qualified and experienced engineers. As a result, these Schneider Switchgears possess reliable performance and longer life than others available in the markets. These Schneider Switchgears are widely used at places where electric supply is required. Being procured from reliable vendors, our Schneider Switchgears are surely the right choice to rely upon. Schneider Switchgear Comprises Of AC/DC contactor,6A to 1600a 3 p & 4 p/, over load relay, electronic relay, molded case circuit breakers ( MCCB)/ 10a to 800a in 3p/4p 25ka/36ka/50ka/70ka range compact cvs /nsx range ,miniature circuit breakers(MCB),/power supply/, air circuit breakers (ACB) switch disconnected fuse( SDF)/, plug in relay/ timers,/ soft starters /, distribution board/ ,plug socket / Bar contactor/ ,cap duty contactor, ,modular enclosures etc.

Our company is highly established and reputed company manufacturing and supplying superior quality, high performing and Gear of any size so that exact needs and requirements of customer can be catered. While manufacturing these gear , we use excellent quality raw materials and highly advanced manufacturing tools, which enhance quality and reduce cost of the products. Our range of products is made following guideline of certified quality and norms of international quality standards and also offers the same at affordable prices.

• Type: Surge Protection Device
• Material: Cermaic, China Clay, Plastic
• Certification: CE Certified, CQC Certified, ISI Certified
• Color: Creamy, Grey, White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Power: 0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw, 25-30Kw30Kw, 5-10Kw
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Warranty: 1Year

We are an eminent and leading trader of surgearrestors.

crane control gear, Control Systems, crane parts

Our company offers sheet metal components as per customers drawing specifications all dimension are controlled with perfect dies and tools. Quality is controlled by special inspection gauges, for their critical assembly needs. These components are manufactured by experienced engineers and skilled workers thus providing complete satisfaction to our clients. These sheet metal components are available at most competitive prices.