Civil Engineering Test Equipment Dealers in Vasna, Ahmedabad

Shrinkage Limit Set (AIM 045) Ref Std : IS 2720 (Part 6), ASTM D 427, BS 1377, AASHTO T 92   The Shrinkage Limit of a soil is defined as the moisture content after which any further reduction of moisture does not cause volume reduction. The shrinkage of clayey soil can be very significant. A fully saturated soil specimen is allowed to dry in free air and its volume is measured repeatedly by immersing in a mercury bath.  From the data obtained from this test, Shrinkage Limit, Shrinkage Ratio, Shrinkage Index and Volumetric Shrinkage can be calculated.The choice of puddle-clay material is often governed bythe results obtained from this test. Application Shrinkage Limit Test Industry Chemical/Process Agricultural Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges Traffic & Transportation Railways Roads, Highways & Bridges

Tile Flexure Strength Testing Machine (AIM 460), Civil Infrastructure-Construction Chemicals, Railways Sleepers, Refractories, Dams & Tunnels. Metal & Material-Tiles & Ceramics

We are offering Complete range of bitumen testing instruments as per following Marshall stability test apparatus Automatic marshall compactor Rolling thin film oven Rotational viscometer Skid resistance tester Ductility testing machine (Without refrigeration) Ductility testing machine with Refrigeration System Fully automatic penetrometer Low temperature waterbath Core drilling machine Mastic Asphalt Hardness Tester Flameproof bitumen extractor Planetary Mixer Petroleum distillation apparatus Distilllation apparatus as Muffle furnace Hot air oven - CE Marked Loss on heating test oven Softening point apparatus Saybolt viscometer Cleaveland flash and fire point apparatus Pensky marten flash point apparatus Benkleman Beam apparatus Density of semi solid bituminous material Marshall Rammer Ductility moulds Camber board Pycnometer bottle Aspirator pumps

This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals. It is particularly useful, in determining the effect on setting time of admixtures in the concrete, where these may have been introduced specifically to increase the setting time.It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60kg, which can be read with respect to the top end of the spring housing. A set of six needle points with areas of 645, 323, 161, 65, 32 and 16mm2 are provided. Supplied complete in a wooden carrying case. Pocket Penetrometer Consists of a needle having face area 3/10 sq.cm. and graduated at a distance of 25mm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set. Supplied complete in a leather carrying case. AS PER ASTM C-403

• Weight: 9.0 Kg
• thickness: 7.5 mm

It shall be of seamless steel tube, 130 mm long and 100 mm internal diameter with a wall thickness of 3 mm, bevelled at one end,( as per section 2.1),It shall be 25 mm high and 100 mm internal dia with a wall thickness of 7.5 mm with a lip to enable it to be fitted on top of the core cutter.It shall have solid mild steel foot of 140 mm diameter and 75 mm height with a concentrically screwed 25 mm dia. Solid mild steel staff. The overall height of the rammer including the foot as well as the length of staff shall be approximately 900 mm.

• Condition: New
• Features: Sterile hood , Biological safety mechanism , Longer service life.

• Model Name/Number: DRA
• Packaging Type: Wooden Box 
• Brand: Frontline
• Usage: Laboratory
• Driven Type: Electric
• Stroke: 50mm. Approx. 30 strokes/min
• Setting: Digital
• Heater: 500 watts stainless steel
• Temperature: Amb. To 45. 0C,
• Temp. Controller: Digital with pt-100 sensor
• Timer: Microprocessor based digital 00. 01 to 99. 99hrs.
• Overall dimension: 375 w x350d x550 mm h
• Accuracy: + 0. 50C

• Temperature: Ambient to 50°C
• Accuracy: Better than ±0.3°C

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password)

bitumen testing equipment, aggregate testing equipment, Cube Mould

ESCR Test Apparatus, air circulating oven, Pipe Notch Cutter

Copper Purity Test Apparatus, high voltage test set

soil testing equipments, Concrete Testing Equipment