Back Back
Colloid Mill Machine
125,000 - 185,000 Per piece
1 Piece (MOQ)
Colloid Mill Machine
100,000 - 150,000 Per Nos.
Silent Features : Coupling provided between motor shaft & rotor shaft for ease in maintenance Three oil seals between the Motor & the processing chamber to prevent liquid going in the motor winding, Resulting in the burning of the motor Modified design of semi concave teeth in rotor & stator reduces the motor HP & gives better performance in size reduction without damaging the product Extended bearing housing specially designed to facilitate fine adjustment of bearing clearances or back lash to avoid metal to metal contact of rotor & stator. This unique design provides smooth & consistence all round performance & long life of rotor & stator Leak proof neoprene sealing device Three way cock system for draining & recirculation of liquids provided as standard. Extra discharge spout provided as standard for viscous products DOL Starter with over load relay for protection against single phasing & low voltage Contact parts can be easily dismantled for cleaning Special design facilitates adjustments of the grinding gap by an exterior screw by means of handle even during operation Flame proof motor & Flame proof rotary switch can be provided on request at extra cost
Best Deals from Colloid Mill
Colloid Mill
95,000 - 135,000 Per piece
Colloid Mill Machine
Get Price Quote
Unique for small volume micronization. Modified design of stator-rotor assembly. Totally leak proof design. Easy to dismantle for cleaning and maintenance. Available in plain, water jacketed & flame proof options. Special design colloid mill working principle facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator. Salient Features:- Colloid Mill - Pharmaceutical Milling, Colloid Mill Machine Unique for small volume micronization. Modified design of stator-rotor assembly. Totally leak proof design. Easy to dismantle for cleaning and maintenance. Available in plain, water jacketed & flame proof options. Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator. The colloid mill machine is used as herbal extractor machine, in food processing, and pharmaceutical lab also.
Colloid Mill
Get Price Quote
special features: round shape colloid mill body, base and top cover made out of ci material having ss cladding in vertical type standard model, suitable for pharmaceutical, veterinary and ayurvedic industries. ss fabricated square body on which machine and motor both are mounted, in vertical type deluxe model. all contact parts are made out of stainless 304 material. (ss 316 optionally) circular ring shaped, internally conical stator having two different tooths stages. toothed conical rotor directly coupled with the motor shaft in vertical standard model and coupled with belt in vertical deluxe model. stator & rotor assembly is balanced and housed in the stainless steel housing. grinding accuracy of 5 – 10 micron due to the perfectly matched & specially designed conical shaped stator & rotor assembly. extended bearing housing specially designed to facilitate fine adjustment of bearing clearances of backlash to avoid metal contact of rotor in vertical deluxe model. special designed adjustment of the grinding gap by an exterior screw by means of two handles even during the operation. three-way cock system for draining and re circulation of liquids provided as standard, in water-jacketed models. extra discharge spout provided as a standard for viscous material.
600 Liter Colloid Mill
90,000 Per Piece
1 Piece (MOQ)
Colloid Mill Machine
50,000 - 5,000,000 Per Piece
1 Piece (MOQ)
Colloid Mill Machine
140,000 - 180,000 Per Nos
10 Piece (MOQ)
Colloid Mill
90,000 - 105,000 Per piece
1 piece (MOQ)
Colloid Mill
Get Price Quote
Colloid Mill
125,000 Per
Colloid Mill
Get Price Quote
Colloid mill machine is a perfect homogenizer cum emulsifier and can be used for various pharmaceutical applications like homogenizing, emulsifying, dispersing, grinding, mixing and extracting. Since decades, we are catering the needs of various industries by reflecting the quality and workmanship of our professional engineers. Colliod mill is ideal for small, medium and large scale tablet batching systems.
Colloid Mill
Get Price Quote
The colloid mill is suitable for cutting down the particle size of a solid or liquid suspended in a liquid. Equipped with hydraulic shear, the colloid mill machine is widely used for creating particles of same size, dispersing, mixing of materials. The colloidal machine has found its wide usage in industries including food & beverages, pharmaceutical, suspensions & emulsion, cosmetics and more. The colloid mill machinery involves stator and rotor in the cylindrical vessels to do shearing for reducing the material size. Working Principle: The material to be reduced enters the colloidal mill through its inlet hopper. It then passes through the gap created between the rotor and stator. The mill then cuts down the size of the material to the desired level. The process requires the inclusion of heavy liquid to start the shearing process. During the milling process, both the materials are stirred at a high rate while the processed material starts draining out of the outlet. If required, the process can be repeated through its re-circulating pipe assembly. Salient Features: The machine works on cGMP model. The machine assembly is made of stainless steel. Compact and rugged structure. Equipped with jacketed stator housing with stainless steel connections. The motors are explosion proof. All the machine contact parts are composed of SS304 / SS316 / SS316 L quality material. Provided with DOL starter with overload relay to protect against single phase line and low voltage.
Colloid Mill
Get Price Quote
A colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. SALIENT FEATURES : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Easy to Moveable and dismantle all contact parts for cleaning. Silicon food grade seal. Separate discharge spout for highly viscous products. OPTIONAL FEATURES : Horizontal / Vertical Drive. Water cooling system. Flame Proof Electrical. SAFETY FEATURES : Overload pressure release mechanism.
Colloid Mill
Get Price Quote
A colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between taper rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. Salient Features: Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Easy to Moveable and dismantle all contact parts for cleaning. Silicon food grade seal. Separate discharge spout for highly viscous products.
Colloid Mill
Get Price Quote
Product is feed to the operating area of a rotor, having a speed of 2800 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor, the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be re-circulated. SALIENT FEATURES All contact parts can be easily and quickly dismantled and cleaned. Machine is designed for continuous operation. Cylindrical screen for higher output. Flame proof electrical can be provided at extra cost.
Colloid Mill
Get Price Quote
Colloid mill S. S. Fabricated Square Body on which Machine and Motor both are mounted, in Vertical Type Deluxe Model.Grinding accuracy of 5 – 10 micron due to the perfectly matched & specially designed Conical shaped stator & Rotor Assly.Circular Ring Shaped, internally Conical Stator having two different tooth stages, for higher accuracy.
Colloid Mill
Get Price Quote
R&D Model Available on Customer Demand. Totally leak proof design. Unique for small volume micronization. Modified design of stator-rotor assembly. Available in plain, water jacketed & flame proof options. Easy to dismantle for cleaning and maintenance.
Colloid Mill
Get Price Quote
Product is feed to the operating area of a rotor, having a speed of 2800 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor, the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be re-circulated.
Colloid Mill
Get Price Quote
All contact parts are made out of SS 316. No casting is used for avoiding contamination problems.Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
Colloid Mill
Get Price Quote
We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items. Due to our commitment towards providing quality approved products to the clients, we source the raw materials only from the well-known and trusted vendors of the market. GMP Model Suitable for Homogenizing, Emulsifying Dispensing, Mixing, Commuting of liquids to highly viscous products Jacketed (Optional) It is based on rotor-stator principle Particle size reduction 5 to 10 micron Output-120 to 12000 Kg./shift 3.0 HP 440 volts Motor
Colloid Mill
Get Price Quote
All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems. Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model. Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
Colloid GMP Model
Get Price Quote
Clit Colloid Mill is suitable for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of liquids to highly viscous products. It is based on rotor-stator principle. It is available in plan as well as Water Jacketed model which is suitable for heat sensitive products. Flame Proof electrical can be supplied on demands.
Colloid Mill
65,000 Per Piece
1 Piece (MOQ)
Colloid Mill
Get Price Quote
SALIENT FEATURES: All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems. Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model. Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator. Three-way cock for draining and re-circulation of liquids provided as standard. Contact parts can be easily dismantled for cleaning. Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation. Flameproof motor and flameproof rotary switch can be provided on request at extra cost.
Colloid Mill
Get Price Quote
OPERATIONProduct fed into the operating area by means of specially designed feeding device is subjected to high shearing, cutting and rubbing forces between stator and rotor. Due to conical arrangement and the centrifugal effect of the rotor rotating at a high speed (2800 RPM), the material is forced in to the next tooth stage. The tooth vibrations which subject the particles with high degree of forces. Intence whirling multiples the grinding and mixing effect. Due to the slightly deviating tapeirng of the milling surface of the stator and rotor, the angular gap becomes narrower towards the discharge section. The processed material continuously leave the mill through the drain pipe, if required it can be re-circulated. SPECIAL FEATURES All contact parts are made out of SS304 / SS316 / SS316 L quality material. Coupling provided between motor shaft and rotor for the ease in maintenance. Special sealing arrangement between the motor and the processing chamber to prevent liquid going in side the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor & stator gives better performance in size reduction without damaging the product. 3 way cock system for draining and re-circulation of liquids & discharge spout for viscous products provided as a standard. DOL starter with overload relay for protection against single phasing and low voltage. Contact parts can be easily dismantled for cleaning. Flame proof construction provided on demand.( On extra cost )
Colloid Mill
Get Price Quote
COLLOID MILL is suitable for homogenizing emulsifying dispersing, mixing, comminuting of liquids to highly viscous products. It is based on rotor stator principle, It is avail OPERATIONS:- Product is feed to the operating areas of a rotor, having a speed of 3000 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor , the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be re circulated SALIENT FEATURES : All contact parts are made out of S.S. 304 (S.S. 316 on demand at extra cost). No castings are used to avoid contamination problems. • 2 Coupling provided between motor shaft and rotor shaft for ease in maintenance. 3 Three leak proof neoprene sealing device between the motor and the processing chamber to prevent liquid going in the motor winding. 4 Modified design of semi concave teeth in rotor and stator reduces motor h.p. and gives better performance in size reduction without damaging the products. 5 Extended bearing housing specially designed to facilitate fine metal contact of rotor and stator. 6 This unique design provides smooth and consistence all around performance and long life of rotor and stator. 7 Three way cock system for draining and recirculation of the liquids provided as standard. 8 Extra discharge sprout provided as a standard for viscous products. 9 DOL starter with overload relay for protection against single phasing and low voltage. 10 Contact parts can be easily dismantled for cleaning.
Colloid Mill
Get Price Quote
Description:Colloid mills are specialized machines used for milling, homogenizing, dispersing and breaking down of agglomerates into small size particles. The primary function of this machine is to breakdown larger particles into uniform sized small particles. The raw material is fed into a hopper and made to pass between the rotor and stator elements. The material is subjected to high shearing and discharged from the hopper onto the second pass wherein it is recalculated; this is due to the conical shape of the machine and the centrifugal effect of the high speed rotating motor. The machine is equipped with cooling and heating jackets and flame proof motor. The output or productivity varies from machine to machine and depends on factors such as feed rate and viscosity of the raw material/particles. Salient Features: • All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used foravoiding contamination problems. • Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model.• Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding,resulting in the burning of the motor.• Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance insize reduction without damaging the product.• Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlashto avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator. • Three-way cock for draining and re-circulation of liquids provided as standard. • Contact parts can be easily dismantled for cleaning. • Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even duringoperation.• Flameproof motor and flameproof rotary switch can be provided on request at extra cost. Application of Colloid Mill: Pharmaceuticals Suspensions Emulsions Cosmetics Utility Requirement: Electrical supply : 3 Phase + Neutral + Earthing Electrical load : 4 KW
Colloid Mill Machine
Get Price Quote
All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems.Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.
Colloid Mill
Get Price Quote
*Depending upon material characteristics viscosity, density & micron size. R&D Model Available on Customer Demand. Totally leak proof design. Unique for small volume micronization. Modified design of stator-rotor assembly. Available in plain, water jacketed & flame proof options. Easy to dismantle for cleaning and maintenance
