Comminuting Mill Machine Dealers in Ahmedabad

Falcon comminuting mill is designed to suit high speed milling needs with plain, water jacketed and flame proof options. Fully S.S. cladding on base & S.S. guards for all moving parts to meet GMP needs. Motor rails, screw and guide rods are chrome plated. Beater assembly bearings are housed in separate pillow blocks for ease in maintenance. Dynamically balanced fixed beater assembly as standard supply. Minimum downtime required to change direction. Hardened and chrome plated beaters and shaft made of SS 410. Fabricated to work long with very low heat, vibration & noise generation. Castors provided for mobility.

Comminuting mill is used for wet and dry granulation, pulverization or dispersion of product or ingredients in pharmaceutical, chemical, bulk drug, food & other industries. Comminuting mill is used for dry and wet granulation, pulverization of pharmaceutical ingredients. It consists of a stainless steel hopper through which the product slides into an enclosed chamber, where it is milled between beaters and reduced to required size and finally collected in a container. The quality and output depends on the shape and size of the beater. Comminuting Mill is used in various industries such as for pharmaceutical, chemical, bulk drugs, food, cosmetics, confectionery, fertilizers, insecticides, detergents etc.

• Output (Kg/Hr)*: 25 to 300
• Rotor Speeds (RPM): 1000 - 2250 - 4500
• Rotor Blades: Swinging type with knife and impact edge
• Screens: (1) Round hole perforated Stainless Steel Sheet (2) Woven stainless steel wire mesh
• Main Electric Motor (Kw/Hp): 5.50 / 7.50
• Electrics: (a) 415V / 3 Phase / 50 Hz
• Overall Dimensions LxWxH (mm): 1260 x 690 x1700
• Net Weight (kg): 310

Salient Features   Versatile machine for particle size reduction and grinding operation Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator. Swing type beaters assembly is provided as a standard supply which increases the output by 10 to 30% and is easy to clean. Water jackted chamber is also available of demand. Beaters are made from HCHC material with hard chrome plating. Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life. Castors are provided for mobility and brakes can be applied for fixing machine at one place. Flame proof electrical can be provided on demand at extra cost

• Type: Comminuting Mill
• Brand Name: CEMTECH PHARMA MACHINERY
• Condition: New
• Warranty: 1 Year
• After-Sales Service Provided: Yes

The organization is supported by systematized packaging system which assists us in meeting the specific packaging requirements of the clients with ease. Also, we ensure zero damage to the products. Backed by a capacious warehouse, we can easily undertake urgent and massive orders of the clients. Also, we ensure complete security of the products.

• Type: Comminuting Mill
• Color: SS316
• Voltage: 220V, 440V, as per party wanr.
• Condition: New
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Production Capacity: 200-500 kg/hour
• Warranty: 1year
• Brand Name: ACUMAC
• Application: PHARMACEUTICAL MACHINERY
• After-Sales Service Provided: YES
• Capacity(t/h): 200-500KG

Technical Specification     Modal : SMC/SM   Rotor Speed : 1000/2250/4500 RPM   Out put : 25-300kgs./Hr.(Depends on material)   Main Electricals Motor : 7.5hp/1440 RPM/3PH.

cGMP point of view machine is provided with SS cladding on base, SS belt guards, SS cover on motor. No exposed painted surface on top of the machine. Motor rails, screw and guide rods are chrome plated.Beaters assembly bearings are in separate pillow blocks for ease in maintenance.Beaters and shaft are of stainless steel 410 quality and beaters are further hardened and chrome plated. Beaters are fitted on a splined shaft.

• Condition: New
• Brand Name: ACCURA
• Port: Nava Seva
• Place of Origin: Gujarat, India

Designed to suit high speed milling needs with plain, water jacketed and flame proof options. Fully S.S. cladding on base & S.S. guards for all moving parts to meet GMP needs. Motor rails, screw and guide rods are chrome plated. Beater assembly bearings are housed in separate pillow blocks for ease in maintenance. Dynamically balanced fixed beater assembly as standard supply. Minimum downtime required to change direction. Hardened and chrome plated beaters and shaft made of SS 410. Fabricated to work long with very low heat, vibration & noise generation.

• Output Speed: 50 to 800 kg
• Blade: 16 Nos.

Comminuting Mill High Speed Milling & Pulverizing Process Application & Process : Comminuting mill is used for the down sizing, milling, pulverization and dispersion of wet and dry products in pharmaceutical, chemical, food, cosmetics, fertilizers industry etc. The product is poured from the top through in feed hopper and material falls on the rotor blades beater assembly for milling or pulverization. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. Knife edges can be removed for cleaning very easily. Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance All Product contact parts AISI 316/ 316L & non contact parts AISI 304. High speed milling, granulating, pulverizing, mixing and size reduction of wet & dry material.. Easy and simple to change knife to impact forward vice-versa by reversible chamber. Dynamic balanced beater assembly bearings are in a separate pillow block at outside chamber. Wide range of sieve of perforated and wire-mesh. Fitted on castor wheels for easy mobility Optional Features : Jacketing chamber for water cooling. AC frequency drive for variable speed, Explosion proof motor and push button, Fixed / swing type beater assembly Uniform feeding system with feeder screw with variable drive..

• Feed Screw Speed: 2 to 60 RPM

One of the most popular and successful application of the comminuting mill machine Is in the preparation of the wet & dry granulations used in the tablet making and in chemical, Bulk Drugs & food industry for granulation & pulverization purpose. For this purpose comminuting mill machine with suitable blades is most suitable one. Regarding the screen & speed, a very good combination or deal depend upon the characteristic of the material & its content of moisture & of course the binder used also.

• Rotor speed: 1000 / 2250 / 4500 RPM
• Main Electrical Motor: 7.5 HP / 1440 RPM / 3 Ph.

Designed to suit high speed milling needs with plain, water jacketed.Contact parts made of SS316 & Non contact parts made of SS304.Beater assembly bearings are housed in separate pillow blocks for ease in maintenance.Dynamically balanced fixed beater assembly as standard supply. Minimum downtime required to change direction.Fabricated to work long with very low heat, vibration & noise generation.

• Material: Cast Iron
• Voltage: 200 - 240 V
• Power: 7.5 HP
• Automation Grade: Semi-Automatic
• Speed: 4500 RPM
• Maximum Output: 30 kg/hr to 1000 kg/hr

GMP point of view machine is provided with S. S. cladding on base, S. S. belt guards, S. S. cover on motor. No exposed painted surface on top of the machine. Motor rails, screw and guide rods are chrome plated. Beaters assembly bearings are in a separate pillow blocks for ease in maintenance. Very less down time as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by single operator. Fixed beaters assembly is provided as a standard supply which increase the output by 10% to 30% reduce noise level and also ease to clean as there are no cavities. (If product demands, swing beaters assembly can be provided.) Beaters and shaft are of stainless steel 410 quality and beaters are further hardened and chrome plated. Beaters are fitted on a splined shaft. Transmission of heat to the chamber from bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.

• Rotor Speed: 1000 / 2200 / 4400 RPM
• Screen Area: 495 mm X 135 mm

Comminuting mill is used for the down sizing, milling, pulverization and dispersion of wet and dry products in pharmaceutical, chemical, food, cosmetics, fertilizers industry etc. The product is poured from the top through in feed hopper and material falls on the rotor blades beater assembly for milling or pulverization. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. Knife edges can be removed for cleaning very easily.Design is cGMP – Current Good Manufacturing Practices compliance, All Product contact parts AISI 316 316L & non contact parts AISI 304, High speed milling, granulating, pulverizing, mixing and size reduction of wet & dry material, Easy and simple to change knife to impact forward vice-versa by reversible chamber.Dynamic balanced beater assembly bearings are in a separate pillow block at outside chamber.Wide range of sieve of perforated and wire-mesh, Fitted on castor wheels for easy mobility.

the comminuting mill machine is primarily used for wet and dry granulation, pulverization in food, pharmaceutical, chemical and other industries. The machine is provided with semi-concave teeth in rotor and stator which helps in reducing the motor hp, and hence assures improved performance. The final output of the material depends on the beaters shape, speed and screen size. working principle the material enters the inlet hopper of the pulverizing comminuting mill before sliding down to the enclosed chamber where it will go through milling between beaters and screen. The reduced size material would then be collected from the bottom of the comminuting mill. There is decent variety in screen size, knife edges, speed so as to meet the customized needs. salient features the pulverizer mill follows cgmp principles. all the contact parts are made of aisi 316/ 316l while non-contact parts of aisi 304. coupling between the motor shaft and rotor shaft facilitates maintenance. beaters are assembled separately in pillow blocks for smooth operation. provided with castors for easy mobility. low heat transmission loss. fritz mill machine is available for plain and water jacketed model. provided with three oil seals between the motor and the processing chamber to stop the liquid from entering the motor windings.  

• Rotor Speed: 1000-2250- 4500 RPM
• Electric Motorc: 7.5 H.P, 1440 RPM,440 V, 50 HZ, 3 Phase

cGMP point of view machine is provided with SS cladding on base, SS belt guards, SS cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated, Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator, Swing type beaters assembly is provided as a standard supply which increases the output by 10 to 30% and is easy to clean., Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splinted shaft, Transmission of heat to the chamber from the bearings, is minimum, as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products, Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life. Castors are provided for mobility and brakes can be applied for fixing machine at one place, Machine is available in Plain & Water jacketed model. Flame proof electrical can be provided on demand at extra cost

• Screen Area: 495 mm X 135 mm
• Rotor Speed: 1000 / 2200 / 4400 RPM

Comminuting mill is used for the down sizing, milling, pulverization and dispersion of wet and dry products in pharmaceutical, chemical, food, cosmetics, fertilizers industry etc.The product is poured from the top through in feed hopper and material falls on the rotor blades beater assembly for milling or pulverization. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. Knife edges can be removed for cleaning very easily.

• Rotor speed: 1000 / 2250 / 4500 RPM
• Output *: 25-300 Kgs. / Hr.
• Main Electrical Motor: 7.5 HP / 1440 RPM / 3 Ph.

Designed to suit high speed milling needs with plain, water jacketed and flame proof options. Fully S.S. cladding on base & S.S. guards for all moving parts to meet GMP needs. Motor rails, screw and guide rods are chrome plated. Beater assembly bearings are housed in separate pillow blocks for ease in maintenance. Dynamically balanced fixed beater assembly as standard supply. Minimum downtime required to change direction. Hardened and chrome plated beaters and shaft made of SS 410. Fabricated to work long with very low heat, vibration & noise generation. Castors provided for mobility.

Comminuting Mill, Dedusting Machine, Dust Extractor Machine, Granulator