Compact Machine Dealers in Sp Ring Road, Ahmedabad

• Usage: Liquid
• Condition: New
• Power(W):: 0.5 H.P.
• Voltage:: 230 volts
• After-sales Service Provided:: Engineers available to service machinery overseas
• Dimension(L*W*H):: 915mm x 610mm x 965mm
• Weight: 100 kgs.

• Color: GREEN
• Voltage: 220V±10V
• Automation Grade: Semi-Automatic
• Usage/Application: SOIL TESTING
• Hammer Weight: 50 KG
• Material: MS
• power: 0.75kW
• Hammer frequency: 30/min
• digital display compaction times: 1-9999As a set
• size: 700*420*1550mm
• Brand Name: KJE

• Type: sheet maker
• Certification: Iso 9001:2008
• Weight: 100-500kg
• Voltage: 110V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warrenty: 1 Year
• Country of Origin: India
• Brand Name: Rudra

• Gear Box Center (MM): 127
• Static Load (KG): 3000
• Gear Ratio: 40/1
• Power Range (KW): 3, 3.7
• Break Voltage (D.C): 110, 220
• Sheave Range: 533
• Oil Capacity (LTR): 3, 3.7
• No.Of Passenger: 6
• Capacity Of Floor: 6

This Machine is available in PE, PM & PI series Standard Features for PM Series 5 Point double Toggle clamping system of steel casting Mould opening and clamping in three stage Manual mould setting gear arrangement Automatic lubricating system in Toggle side Single stroke hydraulic ejector Square tie bar distance with large mould height High tensile, hard-chrome plated tie bar Electrical interlocks in front and rear safety guards Ceramic Band heater High torque hydraulic motor for screw drive Automatic suck back system Two Stage injection speed Gas-nitride screw barrel with standard L/D Ratio Injection movement is actuated by two hydraulic cylinders, for perfect alignment to the clamp unit Injection unit siding on hard-chrome steel treated ground tie bars. Easy access to the screw is ensured Stainless steel hopper with magnetic grill with swiveling system to permit the easy change of the material Limit switch for stroke control MCB Control for each heating zone Star Delta starter for pump motor 200 TO 650T Overload protection for pump motor CLAMPING BIDE     5 Point double Toggle clamping system of steel casting Mould opening and clamping in three stage Manual mould setting gear arrangement Easy & fast lubricating system Square tie bar distance with large mould height High tensile, hard-chrome plated tie bar Electrical interlocks in front and rear safety guards   INJECTION BIDE     Digital temperature controllers and timers High torque hydraulic motor for screw drive Automatic suck back system Two Stage injection speed Gas-nitride screw barrel with standard L/D Ratio Injection movement is actuated by Twin hydraulic cylinders, for perfect alignment to the clamp unit Injection unit siding on hard-chrome steel treated ground tie bars. Stainless steel hopper with magnetic grill with swiveling system.   HYDRALIC & ELECTRICAL     Resiliently mounted hydraulic pump Suction Iine oil filer Limit switch for stroke control MCB Control for each heating zone Star Delta starter for pump motor 200 TO 650 Tonnes Overload protection for pump motor Standard Features for PI Series 5 Point double Toggle clamping system of steel casting with steel link and steel bushes with tempered steel pins Hydraulic ejector through plate with multiple ejector cycles through nine strokes Multiple point automatic lubricating system Clamp closing and clamp opening profile with programmable and independent strokes and speeds Low pressure mould protection with high mould safety Freely programmable control of max. 2 core pulls and air for the control of max. 1 valve Mould opening and clamping in Four stages Mould setting gear arrangement by Hydro-motor Square tie bar distance with large mould height High tensile, hard-chrome platted tie bar Electrical interlocks in front and rear safety guards Ceramic heater High torque hydraulic motor for screw drive Automatic suck back system Four stage injection and four stage holding time Cold start protection Gas-nitride screw barrel with standard L/D Ratio Injection movement is actuated by two hydraulic cylinders, for perfect alignment to the clamp unit Injection unit sliding on hard-chrome steel treated ground tie bars Stainless steel hopper with magnetic grill mounted on a swiveling system Injection speed, pressure and holding time profile on 7 steps Proportional valve for pressure and flow control with electronic feedback Suction and return oil filter Component easily accessible for maintenance purpose Resiliently mounted hydraulic pump Sealed oil tank with oil temperature 24 Volt DC solenoid valve Clamping and injection strokes are monitor by linear transducers M C B Control each heating zone Star Delta starter for pump motor 200 TO 650T Overload protection for pump motor  

• Features: Easy operations, Rugged construction, Long service life
• Max.Static Load: 3000 kg.
• Gear Ratio: 1/41
• Power (HP): 4, 5 HP
• Breke(Voltage): 110 V D.C., 220 V D.C
• Sheave Rang (mm): 530, 630 small range available
• Oil Capacity(Liters): 3 Ltr.
• Weight of M/C. (kg.): 290 kg. (Approx.)

• Voltage: 110V
• Finishing: Polished
• Driven Type: Electric

Max. Load Capacity : 6 Passengers or 408 Kgs. Static Load Capacity : 3000 Kg Rated Speed Maximum : 0.63 m/s, Reduction Ratio 41:1 Gear Box O/p Torque Capacity : 921 Nm @ Input Speed of 940 rpm. Motor Power and Speed : 3.7 kW / 940 rpm, S.S / VVVF, 350 - 410V, 3 PH, 50 Hz S4uty, Insulation Class 'F' Brake operating Mechanism : Electro - Magnetic type with supply DC 110V. / 220V. Friction Sheave Size : Dia 530 x 3 Grooves x RopeDia. 10 or 13mm. Oil capacity : 3 Lits. Weight of complete unit : 270 kg.

• Brand Name: Adinath
• Type: Filling Equipment
• Model Number: AFS-30,55,100
• Application: Liquid
• Packaging Details: Product & Transport Worthy Packing
• Port: Mumbai

We are supplier of Elevator Compact Gear Machine Features: Less maintenance Superior performance Hassle-free functionality

Compact High Speed CNC Turning, CNC Heavy Duty Vertical Lathe Machine

compact machine, frame assembly machine

compact unit blower machine, Marine Chilling Compressor, outer cover

Elevator Compact machine, elevator gear box, car frame, Collapsible Gates

Compact Elevator Traction Machine

compact unit blower machine, Cement Feeding Machine

Compact Elevator Traction Machine

Compact Traction Machine, Imperforated Manual Door

Compact Traction Machine, Imperforated Elevator Door, safety block