Compressed Air Dryer Dealers in Lambha, Ahmedabad

• Max Temperature: 180 Deg C
• Capacity: 500-5000 CFM
• Minimum Output Dew Point: -20 C
• Drying Capacity: 21 - 50 cfm
• Automatic Grade: Automatic
• Dryer Horse Power: 1 HP
• Maximum Pressure: 4 bar
• Design: Customized

• Country of Origin: Made in India
• Usage: Industrial/Food
• Dryer Type: Regenerative Desiccant Dryer
• I Deal In: New Only
• Automation Grade: Automatic

• Frequency: 50-60Hz
• Packaging Type: Packet, Carton Box
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Specialities: Precise Design, Fine Finish
• Dryer Capacity: 20-50Kg, 50-60Kg, 60-100Kg Per Batch
• Type: Refrigerated Air Dryers
• Brand Name: RAPID
• Color: BLUE WHITE RED
• Voltage: 220V
• Condition: New
• Display Type: Digital
• Finishing: Powder Coated
• Power Source: Electric
• Automatic: Fully Automatic
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Usage: USED IN ALL INDUSTRIES
• Connection Type: 1/2'' 1''
• Working Temperature: 45C
• Max Temperature: 55C
• Moisture Removal: 100%

• Capacity: Upto 1500 CFM
• Dryer Horse Power (HP): 2 HP
• Drying Capacity (in cfm): 40 cfm
• Maximum Pressure (in bar): 4 bar
• Operating pressure: 7 Kg/ cm2
• Inlet Temperature: 35 Degree C to 55 Degree C

Process gas heatless desiccant dryers are factory skid-mounted and pre-commissioned. They are fully automatic and require no Special Attention. All operations take place automatically and gas Dryness remains consistent. Our Heatless air dryers are compact, economical, pre assembled, fully automatic type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.Twin vessel desiccant gas dryer with PLC Timer controlled change-over valves. Since the drier size depends only on flow and pressure, inlet temperature of 10oC to 55oC can be handled by same unit.

Chamber-B is depressurized, in the downward direction and the vent gas is released to atmosphere through a purge valve. A controlled portion of the dry gas is used to flush out the desorbed moisture from chamber-B desiccant. When the regeneration is complete, the purge valve is closed and chamer-B is slowly re-pressurized to line pressure for a smooth changeover. A drying period of 5 minutes provides an efficient dew-point of -40 deg. Celsius or better (at atmospheric pressure). In regeneration process approximately 60 seconds are required for re-pressurization. Process gas heatless desiccant dryers are factory skid-mounted and pre-commissioned. They are fully automatic and require no Special Attention. All operations take place automatically and gas Dryness remains consistent. Our Heatless air dryers are compact, economical, pre assembled, fully automatic type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.

Refrigerated air dryers are the most advanced and cheapest mode of drying compressed air. This dryer operates on the principle that cooling of the compressed air. causes condensation of water carried by the compressed air in vapour form. In the refrigerated type of air dryer the cooling takes place in two stages. The compressed air at about 40 Degree C, which enters the Refrigerated type air dryer, first enters the Precoofer . In the precooler the incoming hot-wet air is cooled by the outgoing cool-dry air. In the bargain the outgoing cool-dry is heated upto operating temperature of about 28 – 32 degree C.The hot-wet air, now partially cooled. enters the evaporator. In the evaporator, this partially cool air is chilled down to a temperature of about 2 to 8 degree C. Due to this chilling, the moisture carried by air in vapour form is condensed. This chilled air, carrying condensed moisture, then travels into the moisture separator. The moisture separator is a mechanical equipment, in which the condensed moisture is separated from the air by mechanical action. This moisture is drained out from the moisture separator with the help of an automatic drain valve. This dry-cool air is then passes through the precooler as discussed before. By this process you get dry air at the outlet with a pressure dew point temperature of about 4 Degree C or as required. (but above 2 degree C). In case of refrigerated air dryers, the power consumption for air dry- ing is approximately 5.0 kwh for 1000 cubic feet per minute of air.       Inlet Air Temperature 40 Degree C Pressure Dew Point : 2 Degree C to 5 Degree C Automatic Drain Valve provided in all Models Normal working Pressure : Max. 12 Kg/Cm2 High pressure models up to 50 Kg/Cm2 are also available.

eatures   Heatless Regenerative Desiccant Air Dryer Designed for consistent-pressure dew points, eliminate water and freeze-up in low ambient temperatures     Heatless Regenerative Desiccant Air Dryer provideclean,dry,compressedair due to effective moisture separation&extremely reliable and requires little maintenance with very few moving parts     Heatless Regenerative Desiccant Air Dryer come completely assembled, piped and wired, with a full charge of activated Alumina Desiccant, generally have a small footprint taking up less valuable factory floor space

• Dryer Horse Power: 20 HP
• Material: Mild Steel
• Dryer Brand: Parker
• Air Flow Rate: 200 to 5000 CFM
• Ambient Temperature: 45 Degree C
• Pressure Dew Point: 2-10 Degree C
• Working Pressure: 1.0 Mpa

Refrigerated Air Dryer will remove moisture from compressed air and it will protect pneumatic system & unnecessary expense of maintaining pneumatic cylinders Refrigerated air drier will give you -23 degre dew point air ( almost 99% dry air )Refrigerated air driers are available from 12 kg/cm2 to 50 Kg/cm2 working pressure. All Refrigerated air drier have timer base automatic drain valve which removes moisture at regular interval.

Refrigerated air dryers are the most advanced and cheapest mode of drying compressed air. This dryer operates on the principle that cooling of the compressed air. causes condensation of water carried by the compressed air in vapour form. In the refrigerated type of air dryer the cooling takes place in two stages. The compressed air at about 40 Degree C, which enters the Refrigerated type air dryer, first enters the Precoofer . In the precooler the incoming hot-wet air is cooled by the outgoing cool-dry air. In the bargain the outgoing cool-dry is heated upto operating temperature of about 28 – 32 degree C.The hot-wet air, now partially cooled. enters the evaporator. In the evaporator, this partially cool air is chilled down to a temperature of about 2 to 8 degree C. Due to this chilling, the moisture carried by air in vapour form is condensed. This chilled air, carrying condensed moisture, then travels into the moisture separator. The moisture separator is a mechanical equipment, in which the condensed moisture is separated from the air by mechanical action. This moisture is drained out from the moisture separator with the help of an automatic drain valve. This dry-cool air is then passes through the precooler as discussed before. By this process you get dry air at the outlet with a pressure dew point temperature of about 4 Degree C or as required. (but above 2 degree C). In case of refrigerated air dryers, the power consumption for air dry- ing is approximately 5.0 kwh for 1000 cubic feet per minute of air.

• Capacity: 20 CFM to 1000 CFM
• Voltage: 220 V
• Material: Mild Steel
• Automation Grade: Automatic
• Drying Capacity: 20-500 CFM
• Dryer Technology: Refrigerated
• Dryer Type: Refrigeration Dryer
• Dryer Horse Power: 220V
• Minimum Output Dew Point: -40 C
• Brand: Refrigerated Air Dryer

Single Stage Compressors

Single Stage Compressors, Single and Two Stage Dry Vacuum Pumps

Air Compressor, Cleaning Sand Blasting Machine

air refrigerated dryer, Air Compressor, Standard Medical Disinfector