Compression Load Cell Dealers in Ahmedabad

• Brand Name: Revere
• Material: SS

We are offering single column type load cell asc2 application : track weighbridge.

• Material: Alloy Steel, Stainless Steel
• Certification: ISO Certified
• Application: Industrial Use
• Power Source: Elecrtric
• Output: 1mv, 2mv
• Rated Load: 100kg, 150kg
• Temperature: 20-25deg C
• Automation Grade: Automatic

Key Features : Pre-Calibrated technology (Collaboration with European technology) No Need to Make Calibration (Just Plug & Weighing) Strong Digital Signal provide accurate weighing Profitability to Highest Weighing Accuracy Nickel Plated Tool Alloys Steel True Hermetically Sealing Inbuilt Lightning Protection - Electronic Gas Discharge Tubes Inbuilt Temp. Protection & Surge Protection No Corner Error No Analogue to Digital Converter Predictive diagnostics simplify troubleshooting Two Years Warranty in Eagle Make Load Cells Technical Parameters : Rated Load (E-Max) - 20, 30, 34.5, 40, 50, 60 t Rated Output (mV/V) - 2.00 ± 0.01 Non-linearity - ±0.02% F.S Hysteresis - ±0.02% F.S Repeatability - ± 0.01% to ± 0.02% F.S Creep (30 minutes) - ± 0.02% F.S Zero Balance - ± 1.00% F.S Temperature Effect on Zero - ±0.02% F.S Temperature Effect on Output - ±0.02% F.S Protection Class (IP) - IP68 Communication BPS - 9600/19200 Communication Mode - RS 485 Insulation Resistance (O) - 3000M Excitation Voltage - 7 to 15V DC Compensated Temperature Range - (-10oC to +50oC) Operation Temperature Range - (-20oC to +60oC) Safe Overload - 150% F.S Ultimate Safe Overload - 200% OF R.C Cable - F4 x 16m

Ball and Cup Load cells surpass Its Competitors in Terms Of Resistance against Side Forces. It Is a Fact That the Major Reason behind Load cell Manufacturing Is the Horizontal Side Forces Created by the Vehicles during Brakes and Sudden Start-Ups. That Is why, Scales with Column Type Load cells require Construction Absorbing Side Forces. However, Such Construction As Rocker Supports, Tensions Rods, Buffers, Etc Need Maintenance And Have An Adverse Impact on Weighing Accuracy. applications, the double ended shear beam offers a number of advantages over other designs. Units like the one shown opposite have built-in jacking bolts which can be used to support the weighing structure during installation thus allowing the live load cells to be fitted just prior to commissioning, avoiding damage. The load cell is designed to rock on its mounting base to accommodate misalignment in mounting surfaces whilst still being retained. The mounting arrangement also permits limited movement to allow for thermal expansion and contraction as well as lift off protection. Double-Ended Shear Beam Type CUP & BALL TYPE concept in load cell design provides the following advantages over the conventional compression type load cells. 

Truck Scale. Tank Weighing. Hopper Weighing. Compressive force Testing. Industrial Automation.

• Applications: Truck weighbridges , Silo and hopper weighing , Train “rail” scales , Process weighing

It is a high capacity truck scale and silo load cell which is supplied complete with its own unique rocker mounting components. Suitable for all heavy duty weighing applications the Model 120 gives the user high accuracy and low installation cost. The Model 120 has a stainless steel housing to protect against corrosion. The alloy steel compression element is nickel-plated, and the rocker mounting accessories are zinc-plated alloy steel. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics

Compression Type Load Cell Application: Weighbridges, hoppers, tanks and silos Stainless steel construction High input resistance Features: Capacity: 7.5MT to 45MT Complete environmental protection IP-68 class with complete hermetic sealing Standardized output (3.0 + 0.25 %) available on request Calibration in mVVΩ Sensor Technology: Strain Gauge

We offer compression load cell . Flintec load cells are designed to meet the most stringent accurcy requirements. certificaties have been obtained from weights & measures authorities. Worldwide. rc3 rocker coumn load cell are available in the capacities 7.5 t to 300 t and include accuracy classifications gp,c 1, c3, c4, and c3 mi 8according to oiml r 60: ntep n max =10000 they offer total stainless ateel construction and complete hermetic sealic sealing, making them suitable for use in the toughest industrial environments.

• Model: RTN
• Capacity: 100 to 500 ton
• Material: Stainless Steel
• Ingress protection: IP68
• Application: testing
• Features: Current Calibrated
• Output Sensitivity(FS): 2.0 +/- 0.002 mV/V

Ball and Cup Load cells surpass Its Competitors in Terms Of Resistance against Side Forces. It Is a Fact That the Major Reason behind Load cell Manufacturing Is the Horizontal Side Forces Created by the Vehicles during Brakes and Sudden Start-Ups. That Is why, Scales with Column Type Load cells require Construction Absorbing Side Forces. However, Such Construction As Rocker Supports, Tensions Rods, Buffers, Etc Need Maintenance And Have An Adverse Impact on Weighing Accuracy. applications, the double ended shear beam offers a number of advantages over other designs. Units like the one shown opposite have built-in jacking bolts which can be used to support the weighing structure during installation thus allowing the live load cells to be fitted just prior to commissioning, avoiding damage. The load cell is designed to rock on its mounting base to accommodate misalignment in mounting surfaces whilst still being retained. The mounting arrangement also permits limited movement to allow for thermal expansion and contraction as well as lift off protection. Double-Ended Sher Beam Type Cup & Ball Type concept in load cell design provides the following advantages over the conventional compression type load cells. BENEFITS Greater adverse load capability. Lower sensitivity to adverse loads. Lower height. Lower creep and faster return to zero after load removal. Higher tolerance and environmental protection. Better sealing and environmental protection. Freedom from barometric effect. Greater flexibility of application. The above advantages make the double-ended shear beam load cells superior over the conventional compression load cells and are more popular now a days in developed countries for various fields applications. A brief explanation on the above advantages is given below and the literature provided speaks in detail about the design concept, performance and applications of double-ended shear beam load cells.

This is single column rocker pin type compression load cell constructed from high grade tool steel with electro-less nickel plating for resistance to shock loads and corrosion. It is strain gauge based sensor with temperature compensation for 00 to 600 C. It is hermetically sealed with laser welding for IP 68 environmental protection. Its rocker pin design helps for self centering and self restoring under moving loads of trucks.      

Compression Load Cell

Compression Load Cell, Pressure Transducer, load cell cable