Compression Testers Dealers in Paldi, Ahmedabad

• Speed: 0.001mm/min.

Dedicated compression tester for corrugated board boxes, cartons, containers, drums and other packaging materials. Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell protection. Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm, inch and percent. Programmable extension limits.Drive system temperature and current protection. Positional jog speed 0.001mmmin to maximum. Speed setting increments 0.001mmmin.

• Brand Name: EIE
• Power Supply: AC 1 Phase 220V 60/50Hz
• Power: Electronic
• Application: concrete cube compression testing
• Port: Nhave Seva, Mumbai
• Accuracy: Class 1 (EN) and Class A (ASTM)
• Place of Origin: Gujarat, India
• Display: Touch screen graphical display
• Model Number: TM-042A
• Pace rate control: Fully automatic with servo motor, drive and servo valve
• Safety features: Piston travel limit, emergency stop button

Compliance With Following International Standards EN 12390-4, ASTM C39, AASHTO T22, IS : 14858 (2000) Automatic Test Execution Set test parameters - including load rate and Press the start button The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure Save the test including data results and load-time graph (Optional) Dual stage pump assuring fast piston approach and precise test execution Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22 Controllable pace rate from 1 KN/Sec to 10 KN/Sec. Inbuilt graph in the touch screen display. Auto stop and auto release after completion of each test. Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions. Complete IP based controller. Working on 240V, 50-60Hz, single phase. Frame Four column high stiffness welded frame tested for stability. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens Series TM-042-AA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150x300 mm and cubes up to 200 mm. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. Attachment for Paver block testing is available at extra cost. Safety Features Max. pressure valve to avoid machine overloading Piston travel limit switch (Extra cost) Emergency stop button Hardware 132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional). Optional Accessories at extra Cost Dedicated Data manager PC software

• Supply Ability: 100 Piece/Pieces per Year As Per Buyers Requirement
• Place of Origin: Gujarat, India
• Port: Gujarat, ahmedabad.

We are the leading manufacturers, exporters and supplier of this products.

Manufacturers & Exporters of PET Bottle and Jar Top Load Tester Top Load Test is a test carried out to measure the maximum load at which the buckling of PET bottles, Plastic Containers, Buckets etc. happens. Top Load Test is a measurement of ability of material to withstand forces that tend to pressure applied and to determine to what extent the material withstands pressure before buckling occurs. Specification : Load Capacity : 500 Kg.(Resolution 0.1 Kg) Compression Through : 2 Nos. 400mm x 200mm x 12mm thick plates Maximum distance between Two Plates : 350 mm or as per your requirements. Speed : Variable with AC frequency drive with geared motor. Height : Adjustable As Per Sample. Paint : Powder Coating. Power : 230V Ac, 1 Phase, 50 HZ. Microprocessor based load indicator: Accuracy of ±0.05% of load indicated Newton or Kg. can be selected. Load cell I/P – one

• Voltage: 380 V
• Accuracy: +1.0 %
• Power Source: Electric
• Display: Digital

Unconfined Compression Tester, Proving Ring Type (AIM 074-1) Ref Stds : IS 2720 (Part 10), AASHTO T 208.   Determination of soil shear strength is essential for designing the foundation of structures, soil and soil retaining structures, soil slopes, etc., Shear strength of soil depends on various factors and insitu soil conditions. Therefore, when laboratory tests in soil are performed to evaluate shear strength of soil, the insitu soil conditions and other factors should be simulated for obtaining meaningful results. For example, the Unconsolidated Undrained test on soil will yield the undrained strength, which can be used for finding the immediate stability of an excavation, whereas a consolidated undrained test with measurement of pore pressure can be used to evaluate the effective strength parameters of soil for designing the long term stability of an earth fill dam. It is well known that the engineering behaviour of soil depends on the effective stress and not the total stress. The effective stress can be calculated by measuring the total stress and substracting the pore water pressure from it. To cater to the needs of shear strength determination of soil, a range of equipment is offered, as listed in this section.   Application Shear Strength Measurement Industry   Chemical/Process Agricultural   Civil Infrastructure Dams & Tunnels Geophysical/ Seismology Testing Geotechnical (soil/ rock) Testing Irrigation Mining Real Estate Roads, Highways & Bridges   Education Architecture Building Technology Civil Department Geotechnical Mining Engineering Science Colleges   Traffic & Transportation   Railways Roads, Highways & Bridges  

top load tester, air circulating oven, Pipe Notch Cutter

Box Compression Strength Tester For Transport Packages, Toxicity Tester

Box Compression Strength Tester For Transport Packages, Toxicity Tester

Cube Test Machine, Slab Trolley with Rails, electrical meter

Compression Set Apparatus, Pick Glass, Mini Compass, Round Cutter for GSM

Channel Type Cube Testing Machine, Colour Matching Cabinet, Toxicity Tester

Cube Test Machine, Slab Trolley with Rails, Bitumen Extractor

Compression Set Apparatus For Testing Under Constant Stress