Concrete Coring Machine Dealers in Chandola, Ahmedabad

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. This test is used to determine the compressive strength of a concrete core, which has usually been extracted from an existing structure. The value of compressive strength can then be used in conjuction with other measured properties to access the conditions of the concrete. Extraction of concrete cores, achieved by rotary drilling using a diamond tipped hollow barrel, serve as a means of taking a sample of concrete which can then be used to determine various physical properties, but most commonly compressive strength. Cores can generally be extracted from wherever access allows, and would include floor slabs, walls and columns. 10cm diameter cores, generally afford the minimum diameter required for a representative sample and require less reinstatement than larger diameter cores. 15cm diameter cores will generally give more representative samples than smaller diameter but require more reinstatement. Available in Two Versions, Electrically Operated or Engine Operated for field operation. The Electrically operated machine is fitted with 3 HP 3 Phase AC Motor while on field use Engine operated models have petrol/kerosene run, air cooled 4 stoke single cylinder engine developing 3 to 4 HP at 3000 RPM. The drive from engine to drill head is through V belt and socket speed reducer with a standard reduction 8:1 and totally enclosed in belt guard and sealed. The engine starts with petrol and later on run on kerosene oil. The engine is with ISI certification Mark. The Engine operated models are fitted a water tank for on site application. Depending upon the application and preference of user, in option to petrol/kerosene driven engines.

• Drilling Capacity: 32
• No of spindle speeds: 8
• Range of speed: 105 to 2651 rpm
• Distance Between Spindle Center & Columm Face: 250 mm
• Max. Distance of spindle to base: 1100 mm
• Max. Distance of spindle to work table: 770 mm
• Table Travel: 450 mm
• Table Size: 330x330 mm
• Base Size: 650x460 mm
• Working surface of base: 370x470 mm
• Column Diameter: 87 mm
• Columm Height: 1500 mm
• Spindle Nose Bore: MT-4
• Motor Recommended: 0.75KW (1 H.P.) 1440 RPM
• V-Belt Size: B-48
• Weight Of Machine (Approx): 230Kg

• Country of Origin: India

We are offering cooling machine.deep freez the people at easy cool enterprise are proud to be part of an organization that provides the finest soda, juice and frozen dispensing equipment and component parts.

Pillar Drill Machine

Pcb Drilling Machine

Angle Grinder, Cut Off Machines, Stone Cutting Machines, power machines

Pillar Drilling Machine

riot drill equipments, Body Protector, Shin Guard

Radial Drilling Machine, Mechanical Press Brake, Cutter Grinder

Drill Machine