Conventional Lathes Dealers in Naroda, Ahmedabad

The all new tablet coating machine is widely used for coating purposed in pharmaceutical and food industry mainly. The entire structure is robust and sturdy to give it a very consolidated look. The coating pans have been made considering factors such as rotational speed, total air volume and temperature etc. Working principle: Equipped with the coating pan, the tablet coater allows the product inside the conventional coating pan. During the rotation, the coating material is uniformly showered on the shaking products in the tablet coating pan. Hot air is then blasted inside to dry the material coating evenly before it exits from the venting side. Salient Features The coating pan machine adheres to cGMP model. All the contact parts are made of AISI 316 and non-contact parts of AISI 304. Coating pan is made of  10 SWG, SS304 or SS316 or SS316 L material. Equipped with anti-vibrating unit to keep the machine leveled. Provided with mounting arrangement to facilitate change over between coating pan and polishing pan. The general machine structure is made of MS in standard model whilst using SS304 in GMP model. Equipped with compact air blower arrangement. The revolution of the coating pan is varied with AC driven pulley.

  Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.    Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.  

conventional moulding machine, automatic plastic injection moulding machine