Conventional Lathes Dealers in Ahmedabad

Tablet Coating Machine, Rotary Tablet Machine, Mass Mixer Machine

Conventional Coating Machines are used in a variety of industries including pharmaceutical, confectionary, food and others. Coating pan made from 10 SWG, SS304 or SS316 or SS316 L material and polished to the mirror finished from inside & outside. Coating Pans have been designed after a careful study of the needs of expert coaters such as Rotational Speed, Angle of inclination of Pan, inside finishing of the pan, Total Volume and Temperature of the hot air. The standard pan is elliptical in shape, mounted at 30° angle. RPM of the pan is variable. with help of the variable speed pulley.( A.C. Drive provided optionally ) Inbuilt hot air blower system as a standard supply up to 48'' size (Excluding 60'' & 72'' size) & high capacity mobile hot air blower system also provided (as a optional) with temperature controller to control the temperature of air at selected temperatures between 30°C to 75°C is provided with air delivery pipe to deliver required quantity of air in the pan.   Special Features Pan fabricated from 3 mm thick, SS Sheet of SS 304 / SS 316 quality with adequate mouth opening and depth. Temperature controller provided for temp. Controlling. Anti vibrating unit provided for proper leveling, hence no requirement of foundation. Compact hot air blower with inlet air damping arrangement.  General structure made out of M.S. in Standard Model & same will be covered with SS304 in GMP Model. Easy mounting arrangement for change over from Coating Pan to Polishing Pan.   Optional GMP models. Contact parts (Pan) made out of SS 316 material. Flameproof motor with flameproof starter for Coating Pan Drive. Steam heated hot air blower system with flameproof blower. Polishing pan size 24', 36", 42", 48", 60" & 72", made out of mild steel or SS304 / SS316. Baffles (welded or detachable type) provided inside the pan, if required.

APPLICATION & PROCESS : Conventional coating machine are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds. The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface. SALIENT FEATURES : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316/304 & non contact parts AISI 304. Conventional coating system for manual film coating and sugar coating. Machine is designed with fabricated structure fitted with SS enclosure which makes simple, cleanable outside covering and mounted on anti vibration pad. Closed powerful pan drive with reduction gearbox and motor by variable speed pulley. Movable hot air blowing system with electric heater. Easy to replace polishing pan and other size coating pan. OPTIONAL FEATURES : A.C. frequency Drive for pan. Fixed or detachable type baffles. Interchange different size Pan & Polishing Pan. Atomized Spraying system with Spray Gun, Peristaltic Pump and Solution tank and Electro Pneumatic controls. Pressurized vessel with spray gun. Flame Proof Electrical. Pellegrini type Coating machine. SAFETY FEATURES : Overload pressure release mechanism.

Conventional Coating Machine- Tablet Sugar & Film Coating Conventional Tablet Coating Technic - Sugar & Film CONVENTIONAL COATING : Pan Size: 24"/30"/36"/42"/48"/60"   Application & Process : Conventional coating machine are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds. The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface. Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316/304 & non contact parts AISI 304. Conventional coating system for manual film coating and sugar coating. Machine is designed with fabricated structure fitted with SS enclosure which makes simple, cleanable outside covering and mounted on anti vibration pad. Closed powerful pan drive with reduction gearbox and motor by variable speed pulley. Movable hot air blowing system with electric heater. Easy to replace polishing pan and other size coating pan. Optional Features : A.C. frequency Drive for pan. Fixed or detachable type baffles. Interchange different size Pan & Polishing Pan Atomized Spraying system with Spray Gun, Peristaltic Pump and Solution tank and Electro Pneumatic controls. Pressurized vessel with spray gun. Flame Proof Electrical. Pellegrini type Coating machine. Safety Features :   Overload pressure release mechanism.

  Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.    Operating Panel Operating panel will provided with three phase indication, VFD for variable speed of pan with rpm meter, digital temperature controlling for inlet hot air,blower motor On-Off switches for inlet & exhaust blower. Technical Specifications Size of Pan 18" & 12” Size of Polishing Pan 18” Motor HP 0.25 HP / 3Ph / 415V Material of Pan 10 SWG, SS 316 Pan RPM 0 to 28 approximate Geared motor will be use for speed reduction and A.C. Frequency drive will be use for variable RPM of pan.  Coating pan polish to the mirror finish from outside& inside. Polishing pan made out of SS304 and polishing cloth made out of cotton cloth. General structure made out of SS304 material & polish to the matt finished. Anti vibrating unit provided with m/c. Hot Air Blower System For Coating M/c. Technical Specifications Motor of Blower 0.5 HP/2800RPM/3Ph Heating Load in KW 3.0 KW Digital temperature indicator cum controller to indicate & control the preset air temperature. Air damper provided to control the inlet air flow. SS 304 wire mesh with 10 micron filters will be provided at air inlet. Material of Construction Complete fabricated from Ss304. Only blower fan fabricated from Aluminum. Dynamically balanced blower fan. Air Exhaust System For Coating Machine Technical Specifications Motor of Blower 0.5 hp/2800RPM/3Ph Material of Construction SS304 & Fan – Aluminum Air damper provided to control the air flow. Dynamically balanced blower fan.  

The all new tablet coating machine is widely used for coating purposed in pharmaceutical and food industry mainly. The entire structure is robust and sturdy to give it a very consolidated look. The coating pans have been made considering factors such as rotational speed, total air volume and temperature etc. Working principle: Equipped with the coating pan, the tablet coater allows the product inside the conventional coating pan. During the rotation, the coating material is uniformly showered on the shaking products in the tablet coating pan. Hot air is then blasted inside to dry the material coating evenly before it exits from the venting side. Salient Features The coating pan machine adheres to cGMP model. All the contact parts are made of AISI 316 and non-contact parts of AISI 304. Coating pan is made of  10 SWG, SS304 or SS316 or SS316 L material. Equipped with anti-vibrating unit to keep the machine leveled. Provided with mounting arrangement to facilitate change over between coating pan and polishing pan. The general machine structure is made of MS in standard model whilst using SS304 in GMP model. Equipped with compact air blower arrangement. The revolution of the coating pan is varied with AC driven pulley.

Conventional Coating Machine, Fluid Bed Dryer, Multi Mill Lab Model

conventional braiding machine, Braiding Machine, Wire Braiding Machine

conventional moulding machine, automatic plastic injection moulding machine