Cranes Dealers in Narol, Ahmedabad

In line with clients' variegated requirements, we bring forth a distinguished range of Lifting Jib Crane. The provided jib crane is developed following the guidelines given by our experts using bet quality of material. Offered jib crane is extensively on demand in the market for its high performance and sturdy finish. In addition, we provide this jib crane in variegated specifications as per the application requirements of the patrons. Features: Rust proof Low maintenance Smooth control Specification: Capacity: Upto 5 Ton

• Model No: make coles
• Capacity: 20 Matric Tone
• Boom Lane: 32 m + 4

Ganesh Engineering CO offers the industrial gantry crane for use in industries with especially heavy loads to be lifted and transported quickly and with relative safety. Made to world class standards, our industry gantry crane is ruggedised to suit tough Indian operating conditions, take considerable misuse and yet perform flawlessly for years. This crane complements our line of Gantry crane, Liebherr rubber Tyre gantry cranes and Semi gantry cranes. If you have an application, we have the crane for it and customize equipments for maximum productivity, ease of use, efficiency and thus give maximum savings. Specifications of Industrial Gantry Crane Construction: Heavy duty alloy steel plate all welded construction, gusseted and with struts for rigidity. Wheels: Precision machined alloy steel wheels, hardened, with integral bearings Gearbox: precision machined alloy steel, oil immersed, totally enclosed Motor: 3 phase, 415V AC Crane duty induction type Class I, II, III & IV duty Conforms to IS 807 & 3177 Manufacturing Range: Industrial Gantry crane comes in 1-200 T capacity. Features of Industrial Gantry Crane 110V AC pendant type dustproof, with interlocks, festoon cable and integral control for hoist Optional RC remote control Forward and backward motion, only one possible at a time Dual speed, soft start to protect motor and enhance its life Easy to use, easy to maintain, ruggedised for 25% overload Auto braking in case of power failure, auto resume, limit switches and sensors for operator and material safety High efficiency, best in class performance yet low priced All specifications and features of these cranes are as well as Single girder EOT Crane or Double Girder EOT Crane. Applications: For loading and unloading crates, for movement of materials and machinery from one section to another, warehouses, fabrication units, heavy vessel manufacturers, dockyards, railways and transport terminals. Thus you can understand well the level of efficiency with which our cranes work. So when you need Industrial Gantry Cranes, don’t hesitate but just order it from Ganesh Engineering CO right away!

H.O.T Crane is a Hand Operated overhead traveling crane. Overhead traveling cranes are both single girder and double girder and have a capacity ranging from 500 kg to 50,000 kg capacity.

We offer double girder eot cranes. Double girder eot cranes are designed with adequate factor of safety in compliance with the is-3177 norms. The structured parts of these eot cranes are designed & manufactured by a team of skilled as per is-807. We understand customer’s requirements and make sure to satisfy them by offering single girder cranes or double girder cranes. our range of eot cranes are widely used for heavier loads and longer span. Moreover, these overhead cranes have an advantage of more height as the hook can be lifted up between the girders. we are looking for queries mainly from gujarat, maharashtra, delhi, rajasthan, chennai, and kolkata.

• Type: Heavy Duty
• Application: Industrial
• Color: Yellow
• Load Capacity: 10-15tons
• Warranty: 1 Year
• Hoist Travelling Speed: 15-20 m/min
• Material: Alloy Steel

• Type: Double Girder
• Material: Cast Iron, Mild Steel
• Certification: CE Certified
• Application: Construction, Industrial
• Color: Yellow
• Automatic Grade: Semi Automatic
• Power Source: Hydraulic

• Application: Industrial
• Color: Green, Yellow, Orange
• Type: Double Girder, Single Girder
• Material: Mild Steel
• Max Height: 80-100 feet, 20-40 feet, 40-60 feet, 60-80 feet, 0-20 feet, >100 feet
• Capacity: 20-25 ton, >25 ton, 15-20 ton, 0-5 ton, 10-15 ton, 5-10 ton

Features : High Quality Reliability Timely Execution Convenient to install

Single girder & double girder Under Slung Cranes manufactured by JAPS Project are best utilized where the headroom in a factory is limited or the structure does not allow any other means of supporting the crane other from the roof. ​ The Under Slung Cranes can also be supplied with overhang (girder extending beyond crane span) on one side or both the sides as per the requirement of customer. ​ Salient features: Consistent quality with overhead traveling crane benefits End truck of optimized structural design Rigid beam girders or welded box girders for optimum load distribution Loads can be handled immediately adjacent to the building wall by means of girder ends tailored to the application requirements

xcmg 100 ton hydraulic truck crane

We are providing service of Hydraulic Cranes

ADORN design and manufactures Goliath/Gantry Cranes in accordance with IS: 3177 & IS: 807 and as per international standards. Goliath Cranes or Semi- Goliath Cranes are manufactured in both single and double girder version. They are essentially the same as the regular overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other runway. These “legs” eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in or laid on top of the floor. They are ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steelwork. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, and where additional supporting steelwork would result in a loss of floor area. Application Area Construction sites Ports and harbors Workshops where existing columns cannot bear the wheel loads of a bridge crane Workshops with low roof tie height that might restrict the height of lift of a regular bridge crane Locations where bay lengths are excessive Locations where bay lengths do not remain constant Sites / projects where the crane itself needs to be relocated from one place to another Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of the rails

• cross travel: up to 15 mtr
• capacity: up to 40 ton
• Span: up to 30 mtr
• long travel: up to 15 mtr

Single / double girder overheade.o.t & h.o.t. Cranes: feature: capacity: up to 40 ton span: up to 30 mtr. Long travel speed: up to 15 mtr /min. Cross travel speed: up to 15 mtr /min. •its simple construction reduces the moderate cost. •suitable for short headroom •small capacity types with centre span •easily move on antifriction ball bearing in oil bath, giving positive splash lubrication. design: •modheshwari e.o.t. & h.o.t. Cranes are designed, manufacturing, erection and testing in according with is – 3177, for overhead traveling crane. •our cranes are designed accordance with class – I & ii for medium duty and class – iii & iv for heavy duty with respect to safety factor, as per the customer requirement. •the structure parts of the cranes are designed in accordance with is – 807, structural steel parts used in manufacturing crane confirming to is – 226 relevant standard. •all drives are designed to give sound & efficient performance. •the hoists are designed accordance with is - 3938 in modular construction, short head room, easily on antifriction ball bearing in oil bath giving positive splash lubrication. •our design is simplify to repair & maintenance. •heavy duty steel forged hooks confirming to is- 3815. •special plough steel tasted wire rope confirming to is – 2266. •twin drive arrangements will be provided for l.t. Motions, central drive arrangement also available on request. motors & brakes: •the motors used are specially crane duty suitable for frequent starting, reversing and braking in accordance with is 325. •all trolley are drive motors have suitable ac / dc / brakes as std. Equipments with smooth running properties. controls: •the crane is controlled from pendent push button station is suspended from one end of bridge at a suitable height from the floor level, operating at 110 v or 420 v or 240 v which ensure safety to the operator. •dust proof powder coated sheet – metal housing consists of contactors overload relays fuses, transformers etc. •emergency stop button in all cranes to shutting of the power to the main connectors optional features: micro speed arrangement through frequency inverters / variable frequency drives. cable festooned system or shrouded bus bar system. warming horn. bridge lights. cabin operated through master controller. surface treatment: all structural parts of crane are applied with single coat of primer and two coats of synthetic enamel paints. epoxy paint and p.u. Paints are on request.

Neelkanth electric overhead travelling cranes are designed & manufactured in accordance with IS-3177 to adequate the factor of safety with respect to suitable duty classification. The structural parts of the crane are designed in accordance with IS-807. The Bridge girder is manufactured in the form of box type structure from tested plates confirming to IS-226. Special care is taken for bending & torsional loadings with adequate factors of safety. Product range includes Single girder crane, Double girder crane, Jib crane, Goliath/Gantry crane & HOT crane to suit customer’s specific requirements to handle the material most efficiently. Capacity: 500 kgs to 60,000 kgs.  

• CAPACITY: 1 TON to 7.5 TON
• SPAN: 2.5 Mtr. to 10.0 Mtr.
• HIGHT OF LIFT: 2.5 Mtr. to 20 Mtr.

Our JIB Crane most demanding material handling Requirements. There are wall mounted and piller mounted model that afford manual or motorized rotation. fully floating on bearings with swivel facility upto 360° Jib Crane Arm is fabricated from heavy Section I-beam and Box Girder Built to the highest industries standards. jib crane have earned a repulation for ruggedness and durability. Ranging from 250kgs to 7500kgs and arm radious as desire for the required application.

We are specialized in manufacturing Magnet Crane, which are available in different capacity ranges. These crane are capable to handle heavy loads and are the modified version of single grinding crane. Our double girder crane are more durable than the single girder crane. Rectangular or circular magnets can be provided as per the client requirements.

• Capacity: Available up to 10 T

Safex Electromech Jib Cranes is available with both an independent pillar mounted design as well as existing building column mounted design. Perfectly suited for individual work stations or assembly areas, our jib cranes are available up to 10t capacity, a range of cross travel movement and rotation up to 360°. With both manual and electric slewing options, our Jib Cranes are made to handle a range of lifting jobs. Safex Electromech also offers specially designed wall travelling Jib Cranes to handle a wide range of workstation jobs. An entire system of wall travelling jib cranes can work in conjunction with overhead travelling cranes for an ultra-efficient material handling system.