Cube Mould Dealers in Ahmedabad

• Material: Iron

• Material: Steel
• Warranty: 1 Year
• Feature: High strength
• Shape: Square
• Usage: Industrial
• Speciality: Optimum strength

Place orders with us, timely deliveries of the same are our prime responsibility! We have captured the market with the wide array of products; we make available the same from Ahmedabad(India). Our sturdy cube moulds are available in various dimension like 100mm, 150mm, 200mm etc.

Concrete cube moulds that are used in the preparation of concrete cube specimens of high strength materials for compression testing. These moulds are employed to examine the strength of portland cement, low heat portland cement and some classes of lime. Salient Features Concrete Cube Moulds are available in different sizes and shapes. Made as per the Indian and other international standards. All types of moulds are supplied complete with base plate. (1) Mould Cast Iron, for 5cm, cube (2) Mould Gunmetal, for 5cm, cube (3) Mould Steel for 7.06cm cube with loose base plate. (4) Mould Cast Iron for 7.06cm cube with loose base plate (5) Mould Cast Iron for 10cm cube (6) Mould Cast Iron for 15cm cube (7) Mould Plastic 15cm (8) Mould Cast Iron, for 20cm cube (9) Mould Cast Iron, for 30cm cube.

Varying Sizes of Cubes Available :Most common Size are 75 mm & 150 mm Material: Cast Iron & M.S. FabricatedInternal faces are machined flat to +0.02 mm.All moulds conform to their respective Indian standards.

Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements. General Description & Specifications Complete with base plate. The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.SIZES AVAILABLE : 50MM/ 100MM/ 150MM OPTIONAL ACCESSORIES SPANNER FOR DEMOULDING AND MOULDING,TAMPING ROD WITH SAUQRE FACE. CUBE MOULD 7.06 CMS(FOR CEMENT MORTAR) As per IS : 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 +/- 0.2 kg. Material for construction of these moulds is mild steel. BEAM MOULDS For casting concrete specimens for flexural tests. The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Steel. Faced are machined flat to +/-0.2mm and finished in size to 0.2mm. AS PER IS: 516

Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements. General Description & Specifications Complete with base plate. The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.SIZES AVAILABLE : 50MM/ 100MM/ 150MM OPTIONAL ACCESSORIES SPANNER FOR DEMOULDING AND MOULDING,TAMPING ROD WITH SAUQRE FACE. CUBE MOULD 7.06 CMS(FOR CEMENT MORTAR) As per IS : 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 +/- 0.2 kg. Material for construction of these moulds is mild steel. BEAM MOULDS For casting concrete specimens for flexural tests. The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Steel. Faced are machined flat to +/-0.2mm and finished in size to 0.2mm. AS PER IS: 516

• SIZES: 50MM/ 100MM/ 150MM

Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements.Complete with base plate. The faces of the mould are machined flat to +- 0.02mm accuracy and finished to within +- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.

Varying Sizes of Cubes Available :Most common Size are 75 mm & 150 mm Material: Cast Iron & M.S. FabricatedInternal faces are machined flat to +0.02 mm.All moulds conform to their respective Indian standards

• Material: fiber
• Size: 150 x 150mm
• Country of Origin: Made in India

Varying Sizes of Cubes Available : Most common Size are 75 mm & 150 mm Material: Cast Iron & M.S. Fabricated Internal faces are machined flat to +0.02 mm. All moulds conform to their respective Indian standards.

Introduction Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements.   General Description and specifications Complete with base plate. The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.   The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.   SIZES AVAILABLE : 50MM/ 100MM/ 150MM   Optional Accessory As per IS : 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 +/- 0.2 kg. Material for construction of these moulds is mild steel.   CUBE MOULD 7.06 CMS(FOR CEMENT MORTAR) SPANNER FOR DEMOULDING AND MOULDING,TAMPING ROD WITH SAUQRE FACE.   BEAM MOULDS For casting concrete specimens for flexural tests. The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Stee

• SIZES AVAILABLE: 50MM/ 100MM/ 150MM
• Category: Concrete Testing Equipment

Complete with base plate. The faces of the mould are machined flat to +- 0.02mm accuracy and finished to within +- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth. The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.SIZES AVAILABLE

Moulds-Cube Moulds, Beam Moulds, Cylindrical Moulds, Prism Mould (AIM 343, AIM 344, AIM 346, AIM 347, AIM 349 - AIM 354), AIM 376   AIMIL Moulds are made of high quality metal, strong enough to resist distortion & retain their shape and size even under rugged conditions.We offer moulds of different sizes for cube, beam & cylindrical moulding required for compressive strength testing.   Application Moulding Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

Tower Hoist, Rotary Type Electric Sand Screening Machine

Tower Hoist, mini cranes, RCC Dewatering Pump, Rcc Groove Cutter

Spacer Couplings, Muff Coupling, Brake Drum Steel Coupling

civil laboratory equipment, glassware products, ompression testing machine

Toxicity Tester, galvanized iron cable tray, Slab Trolley

Sprocket, Chain Wheel, Tower Hoist

aggregate testing equipment, bitumen testing equipment, Soil Testing Equipment