Direct Current (DC) Motor Dealers in Rakhial, Ahmedabad

Range : Standard 3 Phase Induction Motors with rating 0.12 HP to 10 HR are available from frame size 63 to 160 with standard speed and various construction. Standard : Performance conforms to IS:325 and dimensions according to IS:1231 and IS:2223. Ratings : Motors are rated for continues duty type S1 at an ambient of 40° C and site altitudes of up to 1000 M above mean sea level. Voltage and Frequency : Motors designed are for rated voltage of 415V +/-6%, 3 Phase, 50 Hz +/-3% supply. Motors with special designs of voltage / frequency can be offered on request. Paint :Standard Synthetic enamel paint is provided which is suitable for tropical conditions. However, special paint can be provided on request. Construction : Standard motors with single shaft extension are for horizontal foot mounting (B3 as per IS:1231) and vertical flange/face mounting (B5 & B14 as per IS:2223). Other types of construction as show below can be offered on request. Insulation System : All standard motors are provided with class "B" insulation system. Motors with any other class of Insulation can be offered on request. Degree of Protection : Motors have IP44 degree of protection as a standard feature conforming to IS 4691. Motors can be supplied with protection IP54 as well as IP55 on special request. Cooling & Ventilation : Type of cooling is as per IS 6362. All motors have an external bi-direction centrifugal fan. Terminal Box : All motors are provided with terminal box is on the top of the housing. Terminal box can be rotated in steps of 90°. Noise : Motors are designed for low noise level in accordance with IS 12065. Bearing System : All motors are equipped with pre-lubricated bearing. Regressing facility can be provided on request. Earthing Terminals : Two earthing terminals are provided in all the motors. Both on the stator housing. Terminal can be provided in "T" Box on request.Special Features Available on Request. Mechanical Features : Special Mountings, Shaft Extensions, Key way, Paint, Nameplate designs. Electrical Features : Supply voltage option (160 V to 600 V) Multiple Voltage, Variation in Supply Frequency (60 Hz), Polarity Option (8, 10, 12 Holes) Special Protection (PTC Thermistor) and Insulation (Class H or Other).

• Voltage: 220 to 440 V
• Brand Name: CG Power
• Speed: 1500 RPM
• Power: 2.2 kW to1500 kW
• Mounting: Foot / Flange / Face
• Frame: IEC 100 to 630

We are a prominent name as DC Geared Motors Manufacturer, Exporter and Supplier in Ahmadabad, Gujarat. The DC Geared Motors come with Armature laminations that are made of first-rate, electrical grade steel. The DC Geared Motors can be availed in different specifications from us. Following are the specifications about DC Geared Motors : Commutator : Made from silver-copper-alloyElectrolytic copper segments insulated from one another with mica. Riser connections are TIG welded.To ensure complete protection against damage from acids, moisture and alkalis, Armature windings are impregnated with synthetic resin and properly baked at designed temp.Main poles are made from thick laminations (G. I. Sheet).High - Electro - graphite carbon brushes usedEquipped with Screen Protected Drip Proof (SPDP) & Totally Enclosed (TE). Ventilation : External force cooling is provided with blower mounted motor

• Weight: 10-20kg
• Voltage: 220V
• Driven Type: Electric
• Phase: Three
• Application: Machine Speed Controlling
• Current Type: DC

We hold expertise in manufacturing, trading and supplying an ample range of PMDC Motor, which is manufactured from high quality raw material and cutting edge technology under the supervision of our highly skilled professionals. Offered products find application in various industries for getting accurate reading. These are quality tested on well-defined parameters in order to ensure there flawlessness and are available at market leading prices. Features: Easy installation Compact design Accuracy Range of PM DC Motors: Torque: 1 KGCM up to 50 KGCM Speed: 300 up to 5000 rpm Power: 0.5 HP to 3.0 HP Voltage: 12V to 220 V DC Standard Features of Permanent Magnet DC Motors: Totally enclosed type construction Pre-lubricated sealed imported bearings on both the ends of shaft Dynamically balanced Rotors Compact and light weight Steel body protected against corrosion. F-Class insulation standard Connection through flying LeadsTerminal Box  PMDC Motor used in: Robotics Projects Electric Vehicles Electric Bicycle Automation Sector

• H.P.CAPACITY: 0.18 H.P.

We are manufacturers, suppliers and exporters of Geared Motors. “CROWN” Geared Motors are manufactured with output ranging from 0 -12 H. P. To 30 H. P. and speed ranging from 0.1 RPM. To 450 RPM. The complete series consist of Seven sizes of gear unit in two stage helical & Seven size of gear unit in three stage helical Each size with three or four motor frames & also (worm) right angle geared motors unit in Eight size with two or three motor frames & RPM.

• Phase: Three Phase
• Material: Stainless Steel
• Frequency: 50 Hz
• Voltage: 230 V
• Application: Industrial
• Surface Finish: Polished
• Brand: Akshar Electronics
• Discharge Rate: 5-350 LPM
• Speed: 14000 RPM

DC Motors are applicable most wherever variable speed control drives are used. The speed control of DC Motors by armature control or field control at constants torque & for constant continuous operation.Due to incorporation with latest technology which ensures safe & trouble-free operations under critical conditions. Construction Features The V-weld impart heavy strength to the yoke. Armature laminations are of high quality electrical grade steel. Gear Shaft Commutator: Made from silver-copper-alloy. Electrolytic copper segments insulated from one another with mica. Riser connections are the TIG welded.

• Weight: 10-20kg
• Finishing: Polished, Chrome Finish
• Packaging Type: Wooden Box
• Pressure: Low Pressure
• Speed: 1000-2000rpm
• Usage: MAchine Gear Shiftings
• Specialities: Rust Proof, Long Life
• Dimension (LxWxH): 375x190x285mm
• Type: Coreless Motors
• Brand Name: Shengling
• Material: Carbon Steel
• Shape: Rectangular
• Color: Silver
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Driven Type: Penaumatic
• Wattage: 20w
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• No. of Poles: 2 Poles
• Operating Type: Manual
• Insulation Type: Class A
• No Load Current: 10 Load Current
• Commutation: Brush
• Mounting: FLANG AND FOOT MOUNTED

• Power: 1/8HP,1/4HP,1/2HP,1HP,2HP,3HP,5HP
• Phase: Single Phase / Three Phase
• Material: Aluminum Alloy / Casting Iron
• Country of Origin: Made in India
• I Deal In: New Only

• Power: 90 W
• Speed: 1500 rpm
• Phase: Single Phase
• Voltage: 220 V
• Frequency: 50 Hz
• Country of Origin: Made in India
• No. of Poles: 4
• Torque: 0.41 Nm
•  :  

direct current motor, tork motor, Geared Motor, Alternator, Dc Drive

Motor, Submersible Pump, Pump, pumping equipments

three phase vibratory motor, single phase vibratory motor

direct current motor, Plastic Machinery Parts, double phase motor

DC Motors, AC Motors, Wire Rope, overhead traveling trolleys

dc brake motor, water motor, ac brake motors

DC Motors